215
ALUMINUM ELECTROLYTIC CAPACITORS
CAT.8100F
Performance Characteristics
ltem
UHE
Miniature Sized, Low Impedance,
High Reliability
Low impedance and high reliability withstanding 4000 hours to 10000 hours.
Compliant to the RoHS directive (2011/65/EU).
Specifications
Approved by Reliability Center for Electronic
Component, Japan-Certification No. RCJ-03-23C
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Radial Lead Type Type numbering system (Example : 10V 1000µF)
U
1
H
2
E
3
1
4
A
5
1
6
0
7
2
8
M
9
P
10
D
11 12
Capacitance tolerance ( ±20%)
Size code
Rated capacitance (1000µF)
Rated voltage (10V)
Configuration
Series name
Type
(mm)
φD
P
φd
10
5.0
0.6
5
2.0
0.5
12.5
5.0
16
7.5
0.6 0.8
18
7.5
0.8
6.3
2.5
0.5 0.6
8
3.5
In case L > 25 for the φ12.5 dia. unit, lead dia. φd = 0.8mm
(L < 20) 1.5
(L 20) 2.0
Pressurerelief vent
(φ6.3up)
φ D
5
Pb-free leadwire
Pb-free PET sleeve
DD
6.3 ED
8 · 10 PD
12.5 to 18 HD
Configuration
15MIN 4MIN
φD+0.5 MAX.
φd
Sleeve (P.E.T.)
L+ MAX.
P±0.5
0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08
Category
Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan
δ
)
Stability at Low Temperature
Endurance
–40 to +105˚C
6.3 to 100V
0.47 to 18000µF
± 20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V)
Rated voltage (V)
Case size
φD <
= 6.3 φD = 8 , 10 φD >
= 12.5
tan
δ
(MAX.)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Z–25˚C / Z+20˚C
6.3 to 10WV
4000 hours 6000 hours 8000 hours
5000 hours 7000 hours 10000 hours
Z–40˚C / Z+20˚C
16 to 100WV
Impedance ratio
ZT / Z20 (MAX.)
Rated voltage
(V)
6.3 10 16 25 35 50 63 100
4 3 2 2 2 2 2 2
8 6 4 3 3 3 3 3
6.3 10 16 25 35 50 63 100
The following specifications shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is
applied at 105˚C , the peak voltage shall not exceed the rated voltage.
Marking Printed with white color letter on black sleeve.
Capacitance change Within ± 25% of the initial capacitance value
tan
δ 200% or less than the initial specified value
Leakage current Less than or equal to the initial specified value
120Hz
20˚C
120Hz
UHE
UHD
0.47 to 33
39 to 330
390 to 1000
1200 to 18000
0.55
0.70
0.75
0.80
50Hz 120Hz 300Hz 1kHz
0.45
0.60
0.65
0.75
0.70
0.85
0.90
0.95
0.90
0.95
0.98
1.00
10kHz or more
1.00
1.00
1.00
1.00
Cap. (µF) Frequency
Frequency coefficient of rated ripple current
Dimension table in next page.
Long Life
• Please refer to page 20 about the end seal configuration.
Values marked with an in the dimension table
are scheduled to be discontinued and are not
recommended for new designs.