Legal Disclaimer Notice Model 15 www.vishay.com Vishay Spectrol www.vishay.com Vishay Disclaimer Rectangular 10 Turn Dial (3 Digit), (4 Digit) 100 Turn FEATURES * * * * * * * QUICK REFERENCE DATA Sensor type Market appliance OPERATIONAL SPECIFICATIONS Operation 3 digit (10 turn) Left digit Right two digits DIALS Industrial Dimensions 25.4 mm x 49.5 mm PARAMETER Numerals The numerals shall be white on a black background and 0.130" H (3.30 cm) Mounting The spring detented knob shall be removed using a straight pull, exposing two no. 4 to 40 hex socket set screws for mounting the dial directly to the component shaft Complete revolutions of turning knob Percent of revolution The unit registers a total count of 999 Operation 4 digit (100 turn) Left two digits Right two digits MECHANICAL SPECIFICATIONS Weight Rectangular digital scale 1" wide 1/ " or 1/ " or metric (6 mm) shaft adapter 4 8 Open or clear plastic window bezel Black anodize finish with standard or white bezel trim Satin clear anodize finish Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Complete revolutions of turning knob Percent of revolution The unit registers a total count of 9999 The indication shall increase with clockwise rotation of the turning knob Graduation lines adjacent to the numerals on the right digit wheel indicate settings 0.2 % of a revolution of the turning knob Dial phased by rotating the exposed component shaft to correspond with the desired reading on the dial prior to tightening the set screws Rotation Accuracy Phasing 1.6 oz. (45.36 g) DIMENSIONS in inches (millimeters) 0.812 MIN. (20.62) COVER 0.015 0.015 0.093 (2.36) BASE 0.094 (2.39) 0.750 (19.05) 1.000 (25.40) 0.625 (15.88) + 0.000 - 0.015 0.125 (3.18) 0.015 Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. (49.53) + 0.002 1 0.250 O (6.35) - 0.00 0.128 O (NO. 30 DRILL) (3.25) 0.750 (19.05) Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. 1.750 (44.45) 1.950 MAX. TURNING KNOB O 0.495 0.695 O (17.65) (12.57) 0.002 Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. WINDOW BEZEL 1.280 (32.51) ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. CL COMPONENT SHAFT HOLE 0.165 (4.19) 0.135 (3.42) 0.015 MOUNTING HOLE PATTERN SETSCREWS 2 PLCS 90 APART BRAKE LEVER KNOB ON OFF TRAVEL 5.95 (15.11) 1.000 MAX. (25.40) ORDERING INFORMATION/DESCRIPTION 15 MODEL Example: 15 - A - 1 - 1 A SHAFT DIAMETER AND NUMERCIAL DISPLAY A 1/4" dia. 3 digit B 1/4" dia. 4 digit C 1/8" dia. 3 digit D 1/8" dia. 4 digit E 6 mm dia. 3 digit F 6 mm dia. 4 digit 1 1 B010 e BEZEL FINISH PACKAGING LEAD FINISH 1. Satin clear anodize 1. Open 3. Black anodize, white 3. Clear plastic window bezel trim 5. Black anodize SAP PART NUMBERING GUIDELINES 15 A 1 1 B10 MODEL SHAFT DIAMETER BEZEL FINISH PACKAGING Revision: 04-Jul-12 Document Number: 57086 1 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000