Model 15
www.vishay.com Vishay Spectrol
Revision: 04-Jul-12 1Document Number: 57086
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rectangular 10 Turn Dial (3 Digit), (4 Digit) 100 Turn
FEATURES
• Rectangular digital scale
•1" wide
•1/4" or 1/8" or metric (6 mm) shaft adapter
• Open or clear plastic window bezel
• Black anodize finish with standard or white bezel trim
• Satin clear anodize finish
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type DIALS
Market appliance Industrial
Dimensions 25.4 mm x 49.5 mm
MECHANICAL SPECIFICATIONS
PARAMETER
Numerals
The numerals shall be white
on a black background and
0.130" H (3.30 cm)
Mounting
The spring detented knob shall be
removed using a straight pull, exposing
two no. 4 to 40 hex socket set screws
for mounting the dial directly to the
component shaft
Weight 1.6 oz. (45.36 g)
OPERATIONAL SPECIFICATIONS
Operation 3 digit
(10 turn)
Left digit
Right two digits
Complete revolutions of turning knob
Percent of revolution
The unit registers a total count of 999
Operation 4 digit
(100 turn)
Left two digits
Right two digits
Complete revolutions of turning knob
Percent of revolution
The unit registers a total count of 9999
Rotation The indication shall increase with clockwise
rotation of the turning knob
Accuracy
Graduation lines adjacent to the numerals on
the right digit wheel indicate settings 0.2 % of
a revolution of the turning knob
Phasing
Dial phased by rotating the exposed
component shaft to correspond with the
desired reading on the dial prior to tightening
the set screws
DIMENSIONS in inches (millimeters)
ORDERING INFORMATION/DESCRIPTION
15 A 1 1 B010 e
MODEL SHAFT DIAMETER
AND NUMERCIAL DISPLAY BEZEL FINISH PACKAGING LEAD FINISH
Example: 15 - A - 1 - 1
A 1/4" dia. 3 digit
B 1/4" dia. 4 digit
C 1/8" dia. 3 digit
D 1/8" dia. 4 digit
E 6 mm dia. 3 digit
F 6 mm dia. 4 digit
1. Open
3. Clear plastic window
1. Satin clear anodize
3. Black anodize, white
bezel trim
5. Black anodize
0.125 (3.18)
0.094
(2.39)
0.750
(19.05)
0.695 Ø (17.65)
10.250 Ø (6.35)
0.128 Ø
(NO. 30 DRILL) (3.25)
MOUNTING
HOLE PATTERN
C
LCOMPONENT SHAFT HOLE
Ø 0.495
(12.57)
WINDOW BEZEL
1.000
(25.40)
TRAVEL
ON
OFF
BRAKE LEVER KNOB
0.812 MIN.
(20.62) COVER
TURNING KNOB
SETSCREWS 2 PLCS
90° APART
1.000 MAX.
(25.40)
5.95 (15.11)
0.135 (3.42)
0.165 (4.19)
1.280 (32.51)
0.093 (2.36)
BASE
0.625
(15.88)
± 0.015
+ 0.000
- 0.015
± 0.015
± 0.015
+ 0.002
- 0.00
0.750 (19.05)
± 0.002
1.750
(44.45)
1.950 MAX.
(49.53)
± 0.015
SAP PART NUMBERING GUIDELINES
15 A 1 1 B10
MODEL SHAFT DIAMETER BEZEL FINISH PACKAGING
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
