1436 Aluminium Foil Tape
Product Data Sheet
Updated : June 2000
Supersedes : July 1999
Product Description
An aluminium foil combined with a rubber adhesive and an easy release liner designed for
holding and sealing on a variety of surfaces. 1436 meets low flammability rating according
to DIN 4102B1.
Physical Properties
Not for specification purposes
Adhesive Type
Rubber
Backing
Soft Aluminium Foil
Liner
White Silicone Paper
(Possible alternative : PE Film)
Shelf Life
12 months from date of despatch by 3M when stored in the
original carton at 21°C (70°F) & 50 % Relative Humid ity
Performance
Characteristics
Not for specification purposes
Adhesion to Steel
AFERA 4001
12 N/10mm
Tensile Strength
AFERA 4001
18 N/10mm
Elongation at Break
AFERA 4005
3.1 %
Total Tape Thickness
0.075 mm
Water Vapour
Transmission Rate
<1.0 g/m²
x 24 h
Flammability Rating
DIN 4102B1, Reference PA-111 2-216
B1
2
Date : June 2000
1436 Aluminium Foil Tape
Additional Product
Information
• Foil backing provides an excellent reflective surface for both heat and light
• Rubber adhesive bonds to many surfaces.
• Low water vapor transmission rate offers excellent sealing and patching performance.
• Best results obtained when applied to clean dry surfaces above 0 °C.
• Performance range –25 °C to +70 °C; short term +100 °C.
Storage
Store in a dry location, out of direct sunlight and away from all sources of heat. Ideal
conditions are 20 °C and 50% relative humidity. Sto rage in roll form for more than 12
months is not recommended.
3
Values presented have been determined by standard test methods and are average values not to be used for specification purposes.
Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own
tests to determine their suitability for your applications.
This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our
recommendations.
3M is a trademark of the 3M Company.
3
3M Svenska AB
Industri
Bollstanäsvägen 3
191 89 Sollentuna
Tel: 08-92 22 50
Fax: 08-92 22 88
E-post: kundservice@mmm.com
www.3M.se/tejp
