V11
1
︳
CHB150-110S SERIES
150 WATT
DC-DC CONVERTERS
FEATURES
* 150W Isolated Output
* Efficiency to 92.5%
* 200KHz Switching Frequency
* 3:1 Input Range
* Regulated Outputs
* Remote ON/OFF
* Over Temperature Protection
* Over Voltage/Current Protection
* Continuous Short Circuit Protection
* Half-Brick Size Meet Industrial Standard
* CE Mark Meets 2004/108/EC
* UL60950-1 Approval
* Meet EN50155
MODEL
NUMBER
INPUT
VOLTAGE
OUTPUT
VOLTAGE
OUTPUT
CURRENT INPUT CURRENT % EFF.
CAPACITOR
LOAD MAX.
MIN.
MAX.
NO LOAD
FULL LOAD
CHB150-110S05
66-160 VDC
5.0 VDC 0 mA
30 A
40 mA 1474 mA 92.5 10000µF
CHB150-110S12
66-160 VDC
12 VDC 0 mA
12.5 A
40 mA 1474 mA 92.5 5600µF
CHB150-110S24
66-160 VDC
24 VDC 0 mA
6.5 A
60 mA 1541 mA 92 2200µF
NOTE: 1. Nominal Input Voltage 110VDC
V11
2
SPECIFICATIONS
All Specifications Typical At Nominal Line, Full Load, and 25 Unless Otherwise Noted℃
INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS:
Input Voltage Range ....……………........…....... 110V ............... 66-160V
Efficiency .................…..................................……..........…....... See Table
Input Surge Voltage (100ms max.) ………………………….. 180
Vdc max.
Isolation Voltage ..................... Input/Output, Input/Case...….. 2250VDC min.
Under Voltage Lockout ……….........….. power up …..…...………. 62V
Output/Case ………………… 1500VDC min.
power down ……………. 56V
Isolation Resistance ..............................…......................…….... 10
7
ohm min.
Positive Logic Remote ON/OFF:
Isolation Capacitance …………………...…………………..…… 1000pF typ.
Logic Compatibility ………………….………... Open Collector ref to -Input
Switching Frequency ........…………………...........…………... 200KHz typ.
Module ON ………………… > 3.5Vdc to 75Vdc or Open Circuit
Operating Case Temperature ...………...........….....……........ -40 to 100℃ ℃
Module OFF …………………………………………….. < 1.8Vdc
Storage Temperature …………………......……..……............ -55 to +105℃ ℃
Input Filter ………………………………………………..….……... Pi Type
Thermal Shutdown Case Temp. .…...……………………..…..……. 105 ℃typ.
OUTPUT SPECIFICATIONS:
Humidity ....................................................... 95% RH max. Non condensing
Voltage Accuracy .......................................………….......... ±1.5% max.
MTBF …… MIL-HDBK-217F, GB, 25 , Full Load ℃......XXS05: 240Khrs typ.
Transient Response:25% Step Load Change
Others: 320Khrs typ.
Error Band .……………..……….……………………. ±5% Vout
Safety ………………….…… UL60950-1 2
nd
(Basic Insulation), Approval
Recover Time ………………………………..…………. <200µs
EMC (note7) …………… Meet EN50155(EN50121-3-2) with External Filter
External Trim Adj. Range ……………………………………….…… ±10%
Shock/Vibration ……………………..……………… Meet EN50155(EN61373)
Ripple & Noise, 20MHz BW (note3)
Environmental ………………………….……… Meet EN50155(EN60068-2-1)
5V …….…………….. 40mV RMS, 100mV pk-pk max.
Dimensions ...................……... 2.28x2.40x0.50 inches (57.9x61.0x12.7 mm)
12V ……..………..…. 60mV RMS, 150mV pk-pk max.
Case Material .....................…............ Aluminum Baseplate with Plastic Case
24V ………….…..… 100mV RMS, 240mV pk-pk max.
Weight ……………………..………………………………………………… 90g
Temperature Coefficient ....................….....................…..... ±0.03%/°C
NOTE:
Short Circuit Protection .........………………......................... Continuous
1. Measured from high line to low line.
Line Regulation (note1) ……...........................................…. ±0.2% max.
2. Measured from full load to zero load.
Load Regulation (note2) ……............….............................. ±
0.2% max.
3. Output ripple and noise measured with 10uF tantalum and 1uF ceramic
Over Voltage Protection Trip Range, % Vo nom. .................. 115-140%
capacitor across output.
Current Limit .................……………..….... 110%-180% Nominal Output
4. Suffix "N" to the model number with negative logic remote on/off
Start up time ………………………………….………………….… 45ms t
yp.
Module ON ……………………………………………..…. < 1.8VDC
Module OFF ……………….. >3.5VDC to 75VDC or open circuit
5. Suffix “-C” to the model number with clear mounting insert. (3.2mm DIA.)
6. An external input capacitor 220uF for all models are recommended to
reduce input ripple voltage.
7. Design meet EN50155 and RIA12 refer to application note.
6Trim
+Sense
+V Output
9
7
8
BOTTOM VIEW
M3*0.5 Through 4pl.
Function
ON/OFF
CASE
-V Input
-V Output
-Sense
+V Input
3
4
5
Pin
1
2
Mounting Inserts
Millimeters: X.X= ±0.5 , X.XX=±0.25
All Dimensions In Inches(mm)
CASE HB
Tolerances Inches: X.XX= ±0.02 , X.XXX= ±0.010
2
3
4 5
1
6
7
9
8
2.40
[61.0]
2.00
[50.8]
1.400
[35.56]
0.600
[15.24]
1.90
[48.3]
[12.7]
[1.02]
2.28
[57.9]
[2.03]
0.50
[4.6]
0.18 min
R
emote On/
O
ff
C
ontrol
ON/OFF (2)
-VIN (4)
HIGH SIGNAL HERE
DISABLE OUTPUT
E
xternal
O
utput
T
rim
+SENSE (8)
TRIM (7)
-SENSE (6)
TRIM UP
TRIM DOWN
+SENSE (8)
TRIM (7)
-SENSE (6)
10K ohms
TRIMPOT
