https://www.phoenixcontact.com/us/produkte/1436437 Flush-type connector - SACC-E-M12MS-5CON-M12 PSCUP - 1436437 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type connector, male connector, 5-pos., M12, A-encoded, front/screw mounting with M12 thread, with solder cups, plastic version Key commercial data Packing unit 0 Minimum order quantity 1 Catalog page Page 36 (PC-2011) GTIN Custom tariff number 85366990 Country of origin GERMANY Technical data General data Rated current at 40C 4A Rated voltage 60 V Number of positions 5 Volume resistance 3 m Insulation resistance 100 M Ambient temperature (operation) -25 C ... 85 C (Male connector / female connector) General characteristics Standards/regulations M12 connector IEC 61076-2-101 Coding A - standard Surge voltage category II Pollution degree 3 Degree of protection IP67 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls PA 66 Sealing material Viton Mounting type Front mounting M12 x 1 With flat nut 08.08.2012 Page 1 / 3 https://www.phoenixcontact.com/us/produkte/1436437 Flush-type connector - SACC-E-M12MS-5CON-M12 PSCUP - 1436437 Technical data General characteristics Connection method Solder cup Status display No Classifications eclass eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 etim ETIM 3.0 EC002061 ETIM 4.0 EC002061 unspsc UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details 08.08.2012 Page 2 / 3 https://www.phoenixcontact.com/us/produkte/1436437 Flush-type connector - SACC-E-M12MS-5CON-M12 PSCUP - 1436437 Approvals GOST Drawings Dimensioned drawing Schematic diagram max.3,0 R1 ,7 5,6 +0,1 4 5 1 12,1 +0,1 3 2 Pin assignment M12 male connector, 5-pos., A-coded, male side 1x45 Housing cutout for M12 fastening thread, mounting panel with feedthrough hole Dimensioned drawing 20,5 14 13,5 O15 M12x0,5 O15 M12x1 SW14 M12 flush-type connector (c) Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 08.08.2012 Page 3 / 3