Part No. | Poles | A SMS 502 2 6.3 SMS 504 4 11.4 SMS 506 6 16.5 SMS 508 8 21.55 SMS 510 10 26.65 2.25 3:3 0.2 Packaging empty | tube packaging tape and reel 9.3402 0-1 0.15 + Lt oa S | 0.4 0.5 2.54 (1.89) 1.2 1.5 1.3 LOT NO. 1| 2 3} 4| 5 | 6 2 Re RL eR et 9 w ts ts ts ts ts ts 0015 om OFF ke no oe Compliance: Rohs II (2011/65/EU) Tolerances: <3: +0.2mm Date Name >3: +0.3mm 11/09 dr Operating temperature] 06/15 | dr Soldering conditions | 02/10] dr Page 1/3 Tolerances 05/12] dr Operating temperature] 03/11| dr_| knitter-switch 30 19 53 Modifications Date |NameSpecifications: Contact rating: Contact resistance: Insulation resistance: Dielectric strength: Capacity: Operating temperature: Mechanical life: Shock resistance: Vibration: Construction: Mounting: Slide position: Material: Soldering conditions: 100mA, 50V DC 50mOhm max. 1 000MOhm min. at 100V DC 500V, 50HZz for the duration of 1 minute max. 5pF between 2 poles -40C to +105C min. 1 000 cycles contact interruption <10usec. with triple shock in all 6 direction shock conditions: 20G, 11msec. duration (sine half wave) contact interruption: <10usec. at vibration test in accordance with MIL-STD-202 D, method 204, condition C case sealed, slide recessed, sealed with protective tape on pc-board - SMD off Contacts: beryllium copper, plated 0.3m gold over 2yum nickel Terminals: nickel silver, plated 0.3m gold over 2um nickel Case / slide: PA IR-reflow soldering T, = 260C Temperature (C) un Max. ramp up rate = 3C/sec. Max. ramp down rate = 6C/sec. tp = 10sec. max. t T, =217C \ t, = 90sec. max. Ts min Ts max = 200C \ Ts min = 150C 25 ts = 120sec. max. Time 25C to peak Time (sec.) Compliance: Rohs II (2011/65/EU) Tolerances: <3: +0.2mm Date Name oo SMS 500 Page knitter-switch 30 19 53 2/3 Modifications Date [Name |Packaging: 2.0 oO ++ op) oO a B 4.0 01.5 2.0 a 0009010006) SMS 502 : | 6 (Et T= p>} oe facts p \ =