www.RFM.com E-mail: info@rfm.com Page 1 of 2
© 2008-2011 by RF Monolithics, Inc. RO3101A-1 6/28/11
Electrical Characteristics
Characteristic Sym Notes Minimum Typical Maximum Units
Center Frequency, +25 °C Absolute Frequency fC2,3,4,5 433.870 433.970 MHz
Tolerance from 433.920 MHz ∆fC±50 kHz
Insertion Loss IL 2,5,6 1.5 2.2 dB
Quality Factor Unloaded Q QU5,6,7 9000
50 Ω Loaded Q QL1458
Temperature Stability Turnover Temperature TO6,7,8 10 25 40 °C
Turnover Frequency fOfC
Frequency Temperature Coefficient FTC 0.032 ppm/°C2
Frequency Aging Absolute Value during the First Year |fA|1≤10 ppm/yr
DC Insulation Resistance between Any Two Terminals 5 1.0 MΩ
RF Equivalent RLC Model Motional Resistance RM5, 7, 9 19.4 Ω
Motional Inductance LM63.8 µH
Motional Capacitance CM2.11 fF
Shunt Static Capacitance CO5, 6, 9 2.4 pF
Test Fixture Shunt Inductance LTEST 2, 7 55.1 nH
Lid Symbolization (in addition to Lot and/or Date Codes) 745 // YWWS
• Ideal for European 433.92 MHz Transmitters
• Very Low Series Resistance
• Quartz Stability
• Surface-mount Ceram ic Case
• Complies with Directive 2002/95/EC (RoHS)
The RO3101A-1 is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic case.
It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters
operating at 433.92 MHz. This SAW is designed specifically for remote-control and wireless security
transmitters operating in Europe under ETSI I-ETS 300 220.
Absolute Ma xim um Ratings
Rating Value Units
CW RF Power Dissipation (See: Typical Test Circuit) +0 dBm
DC V oltage Between Terminals (Observe ESD Precautions) ±30 VDC
Case Temperature -40 to +85 °C
Soldering Temperature (10 seconds / 5 cycles maximum) 260 °C
433.92 MHz
SAW
Resonator
RO3101A-1
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Frequency aging is t he change in fC with time an d is specif ied at +65 °C or
less. Aging may exceed the specification for prolonged temper atures
above +65 °C. Typically, aging is greatest the first year after manufacture,
decreasing in subsequent year s.
2. The cen ter frequency, fC, is measured at the minimum insertion loss point,
ILMIN, with the resonator in the 50 Ω test system (VSWR ≤ 1.2:1) . Th e
shunt inductance, LTEST, is tuned for parallel resonance with CO at fC.
Typi cally, fOSCILLATOR or fTRANSMITTER is approximately equal to the
resonator fC.
3. One or more of the following United States patents apply: 4,454,488 and
4,616,197.
4. Typically, equipment utilizing t his device requires emissions t es ting and
government approval, which is the responsibility of the equipment
manufacturer.
5. Unless noted otherwise, case temperature TC= +25 ± 2 ° C .
6. The design, manufacturing process, and specifications of this device are
subject to change without notice.
7. Derived mat hematically from one or more of the follo wing directly
measured parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.
8. Turnover temperature, TO, is the temperature of maximum (or turnover)
frequenc y, fO. The n ominal f requency at any case tempera ture, T C, may be
calculated from: f = fO[1 - FTC (TO-TC)2]. Typically oscillator TO is
approximately equal t o the specified resonator TO.
9. This equiv alent RLC model approximates resonator performance near the
resonant frequenc y and is pr ovided for refere nce only. The capac ita nce CO
is the static (nonmotional) capacitance between the two terminals
measured at low frequency (10 MHz) with a capacitance meter. The
measuremen t includes p arasitic cap acitanc e with "NC” pads unco nnected.
Case parasitic capacitance is approximately 0.05 pF. Tra nsducer parallel
capacitance can by calculated as: CP≈CO-0.05pF.
10. Tape and Reel standard per ANSI / EIA 481.
SM5035-4
Pb
www.RFM.com E-mail: info@rfm.com Page 2 of 2
© 2008-2011 by RF Monolithics, Inc. RO3101A-1 6/28/11
Electrical Connections
The SAW resonator is bidirectional and may be
installed with either orientation. T he two terminals
are interchangeable and unnumbered. The callout
NC indicates no internal connection. The NC pads
assist with mechanical positioning and stability.
External grounding of the NC pads is
recommended to help reduce parasitic
capacitance in the circuit.
Typical Test Circuit
The test circuit inductor , LTEST, is tuned to resonate with the static
capacitance, CO, a t FC.
Typical Application Circuits
Equivalent Model
Temperature Characteristics
The curve shown on the right
accounts for resonator
contribution only and does not
include LC component
temperature contributions.
Case
Terminal
Terminal
Case Ground
Case Ground
ELECTRICAL TEST
From 50 Ω
Network Analyzer To 50 Ω
Networ k A nalyzer
50 Ω Source
at FCREFLECTED
INCIDENT
P
P
Low-Loss
Matching
Network to
50 Ω
Terminal
Terminal
NC NC
POWE R T EST
CW RF Power Dissipation = INCIDENT - REFLECTED
P P
C1
C2
L1
(Antenna)
+9VDC
47
RF Bypass
Modulation
Input
Typical Low-Power Transmitter Application
RO3XXXA
Bottom View 470
200kΩ
C1
C2
L1
Output
+VDC
RF Bypass
+VDC
Typical Local Oscillator Applications
RO3XXXA
Bottom View
Dimensions Millimeters Inches
Min Nom Max Min Nom Max
A 4.87 5.00 5.13 0.191 0.196 0.201
B 3.37 3.50 3.63 0.132 0.137 0.142
C 1.45 1.53 1.60 0.057 0.060 0.062
D 1.35 1.43 1.50 0.040 0.057 0.059
E 0.67 0.80 0.93 0.026 0.031 0.036
F 0.37 0.50 0.63 0.014 0.019 0.024
G 1.07 1.20 1.33 0.042 0.047 0.052
H - 1.04 - - 0.041 -
I - 1.46 - - 0.058 -
J - 0.50 - - 0.019 -
K - 1.05 - - 0.041 -
L - 1.44 - - 0.057 -
M - 0.71 - - 0.028 -
0.05 pF*
0.05 pF
Cp
Co+
=
*Case Parasitics
Cp
Rm
Lm C m
-80 -60 -40 -20 0 +20 +40 +60
0
-50
-
100
-
150
+80
-
200
0
-50
-100
-150
-200
f
C
= f
O
, T
C
= T
O
∆
T = T
C
- T
O
( °C )
(f-foo
)/f(ppm)
A
B C
D
E ( 3 x )
F ( 4 x )
G ( 1 x )
T o p V i e w S i d e V i e w B o t t o m V i e w
1
2
3
4
H
I
H H
J
J
K
L
MM
PCB Land Pattern
Top View
