MCPC SERIES,PHASE ANGLE CONTROLLER www.crydom.com .52 13.1 (2 PLACES) REV. DATE 11/27/10 For Technical Support: support@crydom.com support-europe@crydom.com .51 13 .03 0.8 .13 3.2 CL 1.78 45.3 .19 4.9 MOUNTING HOLE/SLOT 1.09 27.7 1.10 27.9 .08 2.1 .45 11.5 (2 PLACES) .34 8.7 8-32 TERMINAL & SCREW (2 PLACES) 2.31 58.8 CL 1.88 47.8 TERMINAL BLOCK 4 POS. CL .57 14.5 CL .86 21.8 1.19 30.1 .18 4.6 BASEPLATE Tolerances: 0.02 in / 0.5 mm. All dimensions are in: inches [millimeters] U N L E S S O T H E R W I S E S P E C I F I E D, D I M E N S I O N S A R E I N "i n [m m]" I N F O R M A T I O N I N T H I S D R A W I N G I S P R O V I D E D F O R R E F E R E N C E O N L Y A N D I S S U B J E C T T O C H A N G E.