Golden DRAGON(R) Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant LR W5SM, LA W5SM, LY W5SM Vorlaufige Daten nach OS-PCN-2006-020-A Preliminary Data acc. to OS-PCN-2006-020-A Besondere Merkmale * Gehausetyp: weies SMD-Gehause, farbloser klarer Silikon - Verguss * Typischer Lichtfluss: 49 lm (rot); 70 lm (amber); 41 lm (gelb) bei 500 mA * Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute bei geringem Platzbedarf * Wellenlange: 625 nm (rot), 617 nm (amber), 590 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: Dunnfilm InGaAlP * optischer Wirkungsgrad: 60 lm/W (rot), 74 lm/W (amber), 44 lm/W (gelb) bei 100 mA * Gruppierungsparameter: Lichtstrom, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten * Vorbehandlung: nach JEDEC Level 4 * Gurtung: 24-mm Gurt mit 800/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-B Features * package: white SMD package, colorless clear silicone resin * typical Luminous Flux: 49 lm (red); 70 lm (amber); 41 lm (yellow) at 500 mA * feature of the device: point lightsource with high luminous efficiency and low space * wavelength: 625 nm (red), 617 nm (amber), 590 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: Thinfilm InGaAlP * optical efficiency: 60 lm/W (red), 74 lm/W (amber), 44 lm/W (yellow) at 100 mA * grouping parameter: luminous flux, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering * preconditioning: acc. to JEDEC Level 4 * taping: 24-mm tape with 800/reel, o180 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B Anwendungen Applications * * * * * * * * * * * * Verkehrssignale Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung) Innen- und Auenbeleuchtung im Automobilbereich, z. B. Instrumentenbeleuchtung, Heckleuchte Ersatz von Kleinst-Gluhlampen Tragbare Beleuchtung z. B. am Fahrrad Dekorative Lichtleiter-Anwendungen Signal- und Symbolleuchten zur Orientierung Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) Fassadenbeleuchtung im Innen- und Auenbereich Hinterleuchtung fur LC-Displays * * * * * * * * 2006-11-13 1 traffic signaling backlighting (illuminated advertising, general lighting) Interior and exterior automotive lighting e.g. dashboard backlighting, rear combination lamp (RCL) substitution of micro incandescent lamps portable light souce (e. g. bicycle) decorative and entertainment lighting (incl. fiber optic illumination) signal and symbol luminaire for orientation marker lights (e.g. steps, exit ways, etc.) indoor and outdoor commercial and residential architectural lighting LCD backlighting LR W5SM, LA W5SM, LY W5SM Bestellinformation Ordering Indormation Emissionsfarbe Color of Emission Lichtstrom1) Seite 16 Lichtstarke2) Seite 16 Bestellnummer Luminous Flux1) page 16 IF = 400 mA V (mlm) Luminous Intensity2) page 16 IF = 400 mA IV (mcd) Ordering Code LA W5SM-HZJZ-24 LA W5SM-HXJX-24 amber 39.000 ... 71.000 28.000 ... 52.000 18.300 (typ.) 13.300 (typ.) Q65110A4278 Q65110A4277 LR W5SM-GZHZ-1 LR W5SM-HYJY-1 red 24.000 ... 45.000 33.000 ... 61.000 11.500(typ.) 15.600 (typ.) Q65110A4385 Q65110A4386 LY W5SM-GYHZ-35 LY W5SM-GZJX-46 yellow 21.000 ... 45.000 24.000 ... 52.000 11.000 (typ.) 12.600 (typ.) Q65110A4387 Q65110A4388 Typ Type Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LA W5SM-HZJZ-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen HZ, JX, JY oder JZ enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LA W5SM-HZJZ-24 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA W5SM-HZJZ-24 means that only one group HZ, JX, JY or JZ will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA W5SM-HZJZ-24 means that only 1 wavelength group -2, -3, or -4 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). Vergleichstabelle Correlation Table Lichtstrom1) Seite 16 Luminous Flux1) page 16 IF = 400 mA V (mlm) Typischer Lichtstrom2) Seite 16 Typical Luminous Flux2) page 16 IF = 500 mA V (mlm) LA W5SM-HZJZ-24 LA W5SM-HXJX-24 39.000 ... 71.000 28.000 ... 52.000 65.700 47.600 LR W5SM-GZHZ-1 LR W5SM-HYJY-1 24.000 ... 45.000 33.000 ... 61.000 41.000 56.000 LY W5SM-GYHZ-35 LY W5SM-GZJX-46 21.000 ... 45.000 24.000 ... 52.000 38.400 44.100 Typ Type 2006-11-13 2 LR W5SM, LA W5SM, LY W5SM Grenzwerte Maximum Ratings (TA=25C) Bezeichnung Parameter Symbol Symbol Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj >150 for short term applications C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 500 mA Stostrom Surge current t 10 s, D = 0.1; TA=25C IFM 2000 mA Sperrspannung Reverse voltage (TA=25C) VR not designed for reverse operation V Leistungsaufnahme Power consumption (TA=25C) Ptot 1.4 W Rth JS 15 K/W Warmewiderstand Thermal resistance Sperrschicht/Lotpad4) Seite 16 Junction/soldering point4) page 16 2006-11-13 3 Werte Values Einheit Unit LR W5SM, LA W5SM, LY W5SM Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 400 mA Dominantwellenlange5) Seite 16 Dominant wavelength5) page 16 IF = 400 mA Symbol Symbol Werte Values Einheit Unit red amber yellow (typ.) peak 632 624 597 nm (min.) (typ.) (max.) dom dom dom 620 625 632 612 617* 624 583 590* 595 nm nm nm Spektrale Bandbreite bei 50 % rel max Spectral bandwidth at 50 % rel max IF = 400 mA (typ.) 18 18 18 nm Abstrahlwinkel bei 50 % V (Vollwinkel) Viewing angle at 50 % V (typ.) 2 120 120 120 Grad deg. Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 400 mA (min.) (typ.) (max.) VF VF VF 2.0 2.2 2.6 2.0 2.2 2.6 2.0 2.2 2.6 V V V Sperrstrom Reverse current IR (max.) IR not designed for reverse operation Temperaturkoeffizient von peak Temperature coefficient of peak IF = 400 mA; -10C T 100C (typ.) TCpeak 0.14 0.14 0.12 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 400 mA; -10C T 100C (typ.) TCdom 0.08 0.08 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 400 mA; -10C T 100C (typ.) TCV - 2.5 - 2.5 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 400 mA (typ.) opt 41 48 34 lm/W 60 74 44 max. Optischer Wirkungsgrad max. Optical efficiency IF = 100 mA opt max. (typ.) * Einzelgruppen siehe Seite 5 Individual groups on page 5 2006-11-13 4 lm/W LR W5SM, LA W5SM, LY W5SM Wellenlangengruppen (Dominantwellenlange)5) Seite 16 Wavelength Groups (Dominant Wavelength)5) page 16) Gruppe Group amber amber gelb yellow min. Einheit Unit min. max. max. 2 612 616 3 616 620 583 586 nm 4 620 624 586 589 nm 5 589 592 nm 6 592 595 nm nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstrom1) Seite 16 Luminous Flux1) page 16 V (mlm) GY GZ HX HY HZ JX JY JZ 21000 ... 24000 ... 28000 ... 33000 ... 39000 ... 45000 ... 52000 ... 61000 ... 24000 28000 33000 39000 45000 52000 61000 71000 Lichtstarke2) Seite 16 Luminous Intensity2) page 16 IV (mcd) 7500 8500 10000 12000 14000 16200 18800 22000 (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 bzw. 5 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 4 or 5 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: HX-3 Example: HX-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength HX 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2006-11-13 5 LR W5SM, LA W5SM, LY W5SM Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve rel = f (); TA = 25 C; IF = 400 mA OHL11701 100 % V 80 V 60 yellow amber red 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 16 Radiation Characteristic2) page 16 rel = f (); TA=25C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2006-11-13 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LR W5SM, LA W5SM, LY W5SM Durchlassstrom2) Seite 16 Forward Current2) page 16 IF = f (VF); TA = 25 C Relativer Lichtfluss2)7) Seite 16 Relative Luminous Flux2) 7) page 16 V/V(400 mA) = f (IF); TA = 25 C OHL02072 10 3 mA OHL10788 10 1 V V (400 mA) IF 5 10 2 10 0 5 5 10 1 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 10 -1 1 10 V 3.3 5 10 2 VF 10 3 IF Relative Spannung2) Seite 16 Relative Voltage2) page 16 VF = VF - VF(25 C) = f (Tj); IF = 400 mA Relativer Lichtstrom2) Seite 16 Relative Luminous Flux2) page 16 V/V(25 C)= f (Tj); IF = 400 mA OHL02984 0.30 V mA V VF OHL12880 2.5 V (25 C) 2.0 0.20 yellow 0.15 1.5 0.10 amber red 1.0 0.05 0 0.5 -0.05 -0.10 -60 -40 -20 0 20 40 60 0 -60 -40 -20 0 C 100 Tj 2006-11-13 20 40 60 C 100 Tj 7 LR W5SM, LA W5SM, LY W5SM Dominante Wellenlange2) Seite 16 Dominant Wavelength2) page 16 LR, dom = f (Tj); IF = 400 mA Dominante Wellenlange2) Seite 16 Dominant Wavelength2) page 16 LA, dom = f (Tj); IF = 400 mA OHL02680 630 nm dom dom 628 620 626 618 624 616 622 614 620 612 618 -60 -40 -20 0 OHL02679 622 nm 20 40 60 610 -60 -40 -20 0 C 100 Tj 20 40 60 C 100 Tj Dominante Wellenlange2) Seite 16 Dominant Wavelength2) page 16 LY, dom = f (Tj); IF = 400 mA OHL02879 598 nm dom 596 594 592 590 588 586 584 -60 -40 -20 0 2006-11-13 8 20 40 60 C 100 Tj LR W5SM, LA W5SM, LY W5SM Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T S ) IF Exemplarische durchschnittliche Lebensdauerfur mittlere Helligkeitsgruppe2) Seite 17 Exemplary median Lifetime2) page 17 for median Brightness Group OHL02699 600 mA Einheit 500 Bedingungen mittlere Lebensdauer Conditions median Lifetime 400 IF = 250 mA TS = 25C 50.000 Betriebsstunden operating hours IF = 400 mA TS = 85C 7.000 300 Betriebsstunden operating hours 7.000* Betriebsstunden operating hours 200 IF = 500 mA TS = 125C TJ = 150C 500* Betriebsstunden operating hours 100 IF = 500 mA TS = 150C TJ = 175C 0 0 20 40 60 *The emitter die exhibits excellent performance but slight package discoloration occurs at highest temperatures. The median lifetime depends on the application Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 85 C C 120 80 TS Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 25 C 2.5 IF A 2.0 1.5 1.0 OHL02697 tP D= T 2.5 IF A tP IF T 2.0 D= 0.005 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 1.5 1.0 OHL02698 t D = TP tP IF T D = 0.005 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 0.5 0.5 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2006-11-13 Unit 9 LR W5SM, LA W5SM, LY W5SM Mazeichnung8) Seite 16 Package Outlines8) page 16 0...0.1 (0.004) 0.29 (0.011) 0.24 (0.009) 6.2 (0.244) Protection Diode (R0.85 (0.033)) Cathode 1.9 (0.075) C 0.45 (0.018) 1.1 (0.043) 1.7 (0.067) 0.9 (0.035) 2.0 (0.079) 6.8 (0.268) o0.81 (0.031) o0.73 (0.028) 0.65 (0.026) 7.2 (0.283) Heat sink 0.8 (0.031) (o4.2 (0.165)) A 5.35 (0.210) 5.25 (0.206) 4.25 (0.167) 4.15 (0.163) 11.2 (0.441) 10.8 (0.425) 1.2 (0.047) 5.8 (0.228) 1.6 (0.063) GPLY6147 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 0.2 g Gurtung / Polaritat und Lage8) Seite 16 Verpackungseinheit 800/Rolle, o180 mm Method of Taping / Polarity and Orientation 8) page 16 Packing unit 800/reel, o180 mm 6.35 (0.250) 7.35 (0.289) 0.3 (0.012) 24 (0.945) 2 (0.079) 0.3 (0.012) 12.4 (0.488) 1.55 (0.061) 11.5 (0.453) 4 (0.157) 1.75 (0.069) Cathode/Collector Side 1.9 (0.075) 8 (0.315) OHAY0508 2006-11-13 10 LR W5SM, LA W5SM, LY W5SM Empfohlenes Lotpaddesign8) Seite 16 Recommended Solder Pad8) page 16 Achtung: Anode und Heatsink sind elektrisch verbunden 3 Lotstellen 3 solder points Thermisch optimiertes PCB Thermal enhanced PCB 11.6 (0.457) 1.6 (0.063) 2.3 (0.091) Attention: Anode and Heatsink are electrically connected IR-Reflow Loten IR Reflow Soldering Footprint o4.0 (0.157) Heatsink attach 12.0 (0.472) 11.6 (0.457) 10 (0.394) 0.3 (0.012) Recommended Solder Pad Design 2.3 (0.091) Empfohlene Padgeometrie o4.0 (0.157) o2.5 (0.098) Lotstopplack Solder resist Kupfer Copper 1.6 (0.063) Lotpasten Schablone Solder paste stencil Bare Copper Freies Kupfer 2006-11-13 OHPY2844 11 LR W5SM, LA W5SM, LY W5SM Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning 2006-11-13 12 s 300 LR W5SM, LA W5SM, LY W5SM Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: Bar Code (1T) LOT NO: Lot Number RoHS Compliant ML Temp ST 2 260 C RT m pl (6P) BATCH NO: Batch Number e Semiconductors (9D) D/C: Date Code Sa Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel Additional TEXT R077 DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 0.3 24 + - 0.1 4 0.1 8 0.1 2 0.1 1.5 + 0.1 1.75 0.1 11.5 0.1 (0.157 0.004) (0.315 0.004) (0.079 0.004) (0.059 + 0.004) (0.069 0.004) (0.453 0.004) Reel dimensions in mm (inch) A 180 (7) 2006-11-13 W Nmin W1 W2 max 24 (0.945) 60 (2.362) 24.4 + 2 (0.961 + 0.079) 30.4 (1.197) 13 LR W5SM, LA W5SM, LY W5SM Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro tor < tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % kin Ca (if life s ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo N TIO U A C O S R A M d Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% If wet, parts still adequately dry. change desiccant 5% Humidity Indicator MIL-I-8835 Desiccant OSR AM OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label L VE el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 _ < inf pa % of to ak 90 urs d ). < ns (pe or d Ho urs de , cte itio Ho urs an bje ing co C 72 nd Ho urs 5 te 48 C su ss e Ho co ce 24 6 da y 40 be tim e e C h l pro < tor tim or e ). wit 23 tim at t wilnt l or fac C Flo s tim at or ca ale at re. Flo d or el nth tha nti Flo uiv du 4 if: rea es l Flo lab mo ide 5 ce eq low g, ve l vic 5a is be or de 24 tin en pro 6 Le ve l de , e te co , g: un wh Le ve l ke r se da ure ba ed low Le ve mo % ba e ba al d Le ist ure en ref e e 10 tim se for ist ure ale op se for > , Mo se 3 ist ure is or . , se is ha Mo nk be ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba Ca TD po If bla hin % kin life s (if ar s p. wit 10 ba tor t. J-S thi, va elf Ye ar ek _ < e icat me , C 1 urs Ye Sh terlow tem ted at ed uir > 1 WeHo un Af Indno uir DE dy 1. d e 4 ref 8 reqy is JE 2. bo Mo ore tim e e 16 req : C/ es dit2b a) St tim or mi is e ed or g e IP tim vic b) or Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e 1 l Flo If al ref tim ve l 2 2a 4. se d 3 Le ve l g an Le ve l Ba te ure Le ve Le ist ure Da ist ure Mo ist ure Mo ist Mo Mo N VE RS IO insITI TO T ntaNSUC U g coSEND CO Ais baRE TU MI CThIS SE DE MY R1 8 Q -1 P1+ GR OU P: M ul LS ti Y TO T6 PL 76 s 01 44 D/ C: 00 O pt or o ct du (9D ) 4 NO : (Q )Q TY : 20 O S m RA ic M on Se 3G H1 23 25 014 110 (X ) PR OD NO : (1T ) LO T (6P ) NO : 12 BA TC H 8 2199 2100 (G ) Muster ED Bin Bin 1: Bin 2: P3: Q- 1-2 ML 1-2 0 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: MO TO OP D/C : 01 (9D ) P1+ Q -1 DE MY R1 8 GR OU P: 00 44 M ul LS ti Y TO T6 PL 76 : (Q )Q TY : 20 O Se S m RA ic M on du O ct pto or NO s 3G H1 23 4 25 014 110 O SR AM (X) PR OD NO : (1T ) LO T (6P ) NO : 12 BA TC H 998 021 210 (G ) Muster ED Bin Bin 1: Bin 2: P-1 3: Q- -20 ML 1-2 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: Barcode label Packing Sealing label OHA02044 2006-11-13 14 LR W5SM, LA W5SM, LY W5SM Revision History: 2006-11-13 Previous Version: 2006-11-10 Page Subjects (changes since last revision) Date of change 4, 7 Temperature coefficient of VF 2005-10-13 1, 4 max. Optical efficiency 2005-11-02 4 Forward voltage 2005-11-25 3, 9 completely rework 2005-12-21 11 solder pad reworked 2006-01-24 1, 11, 12 acc. to OS-PCN-2006-020-A 2006-06-20 9 Lifetime table 2006-11-10 3 Junction temperature 2006-11-13 Anm.: Gema IEC 60825-1 (EN 60825-1) gilt: Note: According IEC 60825-1 (EN 60825-1): LED STRAHLUNG LED RADIATION NICHT DIREKT MIT OPTISCHEN DO NOT VIEW DIRECTLY INSTRUMENTEN BETRACHTEN WITH OPTICAL INSTRUMENTS LED KLASSE 1M CLASS 1M LED PRODUCT OHW12884 OHW02884 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 16 may only be used in life-support devices or systems10) page 16 with the express written approval of OSRAM OS. 2006-11-13 15 LR W5SM, LA W5SM, LY W5SM Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische technische oder abgeleitete Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen oder abgeleiteten Werten unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) 4) Fur weitere Informationen siehe Applikationsschrift im Internet (www.osram-os.com). 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,05 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1. 8) Mae werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 10) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1.) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. Due to the special conditions of the manufacturing processes of LED, the typical or calculated data of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical or calculated data of the typical characeristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) For further information please find the application note on our web site (www.osram-os.com). Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.05 V. 4) 5) 6) 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 8) Dimensions are specified as follows: mm (inch) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. 2006-11-13 2) 16 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Osram Opto Semiconductor: LR W5SM-GZHZ-1-Z LY W5SM-HXJX-35-Z LY W5SM-HYJY-46-Z LY W5SM-HZJZ-35-Z LY W5SM-HZJZ-46-Z LR W5SM-HYJY-1-Z LA W5SM-HZJZ-24-Z LY W5SM-GZJX-46-Z LA W5SM-HXJX-24-Z LY W5SM-GYHZ-35-Z LY W5SM-HZJZ-46-1 LY W5SM-HZJZ-36-1 LY W5SM-HZJZ-35-1