LR W5SM, LA W5SM, LY W5SM
Golden DRAGON®
Enhanced thin film LED
Lead (Pb) Free Product - RoHS Compliant
Vorläufige Daten nach OS-PCN-2006-020-A
Preliminary Data acc. to OS-PCN-2006-020-A
2006-11-13 1
Besondere Merkmale
Gehäusetyp: weißes SMD-Gehäuse, farbloser
klarer Silikon - Verguss
Typischer Lichtfluss: 49 lm (rot);
70 lm (amber); 41 lm (gelb) bei 500 mA
Besonderheit des Bauteils: Punktlichtquelle
mit hoher Lichtausbeute bei geringem
Platzbedarf
Wellenlänge: 625 nm (rot), 617 nm (amber),
590 nm (gelb)
Abstrahlwinkel: Lambertscher Strahler (120°)
Technologie: Dünnfilm InGaAlP
optischer Wirkungsgrad: 60 lm/W (rot),
74 lm/W (amber), 44 lm/W (gelb) bei 100 mA
Gruppierungsparameter: Lichtstrom,
Wellenlänge
Verarbeitungsmethode:r alle
SMT-Bestücktechniken geeignet
Lötmethode: IR Reflow Löten
Vorbehandlung: nach JEDEC Level 4
Gurtung: 24-mm Gurt mit 800/Rolle, ø180 mm
ESD-Festigkeit: ESD-sicher bis 2 kV nach
JESD22-A114-B
Anwendungen
Verkehrssignale
Hinterleuchtung (Werbebeleuchtung,
Allgemeinbeleuchtung)
Innen- und Außenbeleuchtung im Automobilbe-
reich, z. B. Instrumentenbeleuchtung, Heckleuchte
Ersatz von Kleinst-Glühlampen
Tragbare Beleuchtung z. B. am Fahrrad
Dekorative Lichtleiter-Anwendungen
Signal- und Symbolleuchten zur Orientierung
Markierungsbeleuchtung (z.B. Stufen, Fluchtwege,
u.ä.)
Fassadenbeleuchtung im Innen- und
Außenbereich
Hinterleuchtung für LC-Displays
Features
package: white SMD package, colorless clear
silicone resin
typical Luminous Flux: 49 lm (red);
70 lm (amber); 41 lm (yellow) at 500 mA
feature of the device: point lightsource with
high luminous efficiency and low space
wavelength: 625 nm (red), 617 nm (amber),
590 nm (yellow)
viewing angle: Lambertian Emitter (120°)
technology: Thinfilm InGaAlP
optical efficiency: 60 lm/W (red),
74 lm/W (amber), 44 lm/W (yellow) at 100 mA
grouping parameter: luminous flux,
wavelength
assembly methods: suitable for all
SMT assembly methods
soldering methods: IR reflow soldering
preconditioning: acc. to JEDEC Level 4
taping: 24-mm tape with 800/reel, ø180 mm
ESD-withstand voltage: up to 2 kV acc. to
JESD22-A114-B
Applications
traffic signaling
backlighting (illuminated advertising, general
lighting)
Interior and exterior automotive lighting
e.g. dashboard backlighting, rear combination lamp
(RCL)
substitution of micro incandescent lamps
portable light souce (e. g. bicycle)
decorative and entertainment lighting (incl. fiber
optic illumination)
signal and symbol luminaire for orientation
marker lights (e.g. steps, exit ways, etc.)
indoor and outdoor commercial and residential
architectural lighting
LCD backlighting
2006-11-13 2
LR W5SM, LA W5SM, LY W5SM
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen
Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro
Gurt geliefert. Z.B.: LA W5SM-HZJZ-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen HZ, JX,
JY oder JZ enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird
nur eine Wellenlängengruppe geliefert. Z.B.: LA W5SM-HZJZ-24 bedeutet, dass auf dem Gurt nur eine der
Wellenlängengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 für nähere Information).
Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5
for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each
reel). E.g. LA W5SM-HZJZ-24 means that only one group HZ, JX, JY or JZ will be shippable for any one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups
will be shipped on any one reel. E.g. LA W5SM-HZJZ-24 means that only 1 wavelength group -2, -3, or -4 will
be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for
explanation).
Bestellinformation
Ordering Indormation
Typ
Type
Emissions-
farbe
Color of
Emission
Lichtstrom1)
Seite 16
Luminous
Flux1)
page 16
IF = 400 mA
ΦV (mlm)
Lichtstärke2)
Seite 16
Luminous
Intensity2)
page 16
IF = 400 mA
IV (mcd)
Bestellnummer
Ordering Code
LA W5SM-HZJZ-24
LA W5SM-HXJX-24
amber 39.000 ... 71.000
28.000 ... 52.000
18.300 (typ.)
13.300 (typ.)
Q65110A4278
Q65110A4277
LR W5SM-GZHZ-1
LR W5SM-HYJY-1
red 24.000 ... 45.000
33.000 ... 61.000
11.500(typ.)
15.600 (typ.)
Q65110A4385
Q65110A4386
LY W5SM-GYHZ-35
LY W5SM-GZJX-46
yellow 21.000 ... 45.000
24.000 ... 52.000
11.000 (typ.)
12.600 (typ.)
Q65110A4387
Q65110A4388
Vergleichstabelle
Correlation Table
Typ
Type
Lichtstrom1)
Seite 16
Luminous Flux1)
page 16
IF = 400 mA
ΦV (mlm)
Typischer Lichtstrom2)
Seite 16
Typical Luminous Flux2)
page 16
IF = 500 mA
ΦV (mlm)
LA W5SM-HZJZ-24
LA W5SM-HXJX-24
39.000 ... 71.000
28.000 ... 52.000
65.700
47.600
LR W5SM-GZHZ-1
LR W5SM-HYJY-1
24.000 ... 45.000
33.000 ... 61.000
41.000
56.000
LY W5SM-GYHZ-35
LY W5SM-GZJX-46
21.000 ... 45.000
24.000 ... 52.000
38.400
44.100
LR W5SM, LA W5SM, LY W5SM
2006-11-13 3
Grenzwerte
Maximum Ratings
(TA=25°C)
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
Betriebstemperatur
Operating temperature range
Top – 40 … + 110 °C
Lagertemperatur
Storage temperature range
Tstg – 40 … + 110 °C
Sperrschichttemperatur
Junction temperature
Tj>150 for short term
applications
°C
Sperrschichttemperatur
Junction temperature
Tj+ 125 °C
Durchlassstrom
Forward current
(TA=25°C)
IF500 mA
Stoßstrom
Surge current
t10 µs, D = 0.1; TA=25°C
IFM 2000 mA
Sperrspannung
Reverse voltage
(TA=25°C)
VRnot designed for
reverse operation
V
Leistungsaufnahme
Power consumption
(TA=25°C)
Ptot 1.4 W
Wärmewiderstand
Thermal resistance
Sperrschicht/Lötpad4)
Seite 16
Junction/soldering point4)
page 16
Rth JS 15
K/W
2006-11-13 4
LR W5SM, LA W5SM, LY W5SM
Kennwerte
Characteristics
(TA = 25 °C)
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
red amber yellow
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
IF = 400 mA
λpeak 632 624 597 nm
Dominantwellenlänge5)
Seite 16
(min.)
Dominant wavelength5)
page 16
(typ.)
IF = 400 mA (max.)
λdom
λdom
λdom
620
625
632
612
617*
624
583
590*
595
nm
nm
nm
Spektrale Bandbreite bei 50 % Φrel max (typ.)
Spectral bandwidth at 50 % Φrel max
IF = 400 mA
∆λ 18 18 18 nm
Abstrahlwinkel bei 50 % ΦV (Vollwinkel) (typ.)
Viewing angle at 50 % ΦV
2ϕ120 120 120 Grad
deg.
Durchlassspannung6)
Seite 16
(min.)
Forward voltage6)
page 16
(typ.)
IF = 400 mA (max.)
VF
VF
VF
2.0
2.2
2.6
2.0
2.2
2.6
2.0
2.2
2.6
V
V
V
Sperrstrom
Reverse current (max.)
IR
IR
not designed for
reverse operation
Temperaturkoeffizient von λpeak (typ.)
Temperature coefficient of λpeak
IF = 400 mA; –10°C T 100°C
TCλpeak 0.14 0.14 0.12 nm/K
Temperaturkoeffizient von λdom (typ.)
Temperature coefficient of λdom
IF = 400 mA; –10°C T 100°C
TCλdom 0.08 0.08 0.10 nm/K
Temperaturkoeffizient von VF(typ.)
Temperature coefficient of VF
IF = 400 mA; –10°C T 100°C
TCV– 2.5 – 2.5 – 2.5 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 400 mA
ηopt 41 48 34 lm/W
max. Optischer Wirkungsgrad
max. Optical efficiency (typ.)
IF = 100 mA
ηopt max.
60 74 44
lm/W
* Einzelgruppen siehe Seite 5
Individual groups on page 5
LR W5SM, LA W5SM, LY W5SM
2006-11-13 5
Wellenlängengruppen (Dominantwellenlänge)5)
Seite 16
Wavelength Groups (Dominant Wavelength)5)
page 16
)
Gruppe
Group
amber
amber
gelb
yellow
Einheit
Unit
min. max. min. max.
2612 616 nm
3616 620 583 586 nm
4620 624 586 589 nm
5589 592 nm
6592 595 nm
Helligkeits-Gruppierungsschema
Brightness Groups
Helligkeitsgruppe
Brightness Group
Lichtstrom1)
Seite 16
Luminous Flux1)
page 16
ΦV (mlm)
Lichtstärke2)
Seite 16
Luminous Intensity2)
page 16
IV (mcd)
GY
GZ
HX
HY
HZ
JX
JY
JZ
21000 … 24000
24000 … 28000
28000 … 33000
33000 … 39000
39000 … 45000
45000 … 52000
52000 … 61000
61000 … 71000
7500 (typ.)
8500 (typ.)
10000 (typ.)
12000 (typ.)
14000 (typ.)
16200 (typ.)
18800 (typ.)
22000 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus
4 bzw. 5 Helligkeitsgruppen.
Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note: The standard shipping format for serial types includes a family group of 4 or 5 individual brightness groups.
Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: HX-3
Example: HX-3
Helligkeitsgruppe
Brightness Group
Wellenlänge
Wavelength
HX 3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen für jede Selektion enthalten.
Note: No packing unit / tape ever contains more than one group for each selection.
2006-11-13 6
LR W5SM, LA W5SM, LY W5SM
Relative spektrale Emission2)
Seite 16
Relative Spectral Emission2)
page 16
V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve
Φrel = f (λ); TA = 25 °C; IF = 400 mA
Abstrahlcharakteristik2)
Seite 16
Radiation Characteristic2)
page 16
Φrel = f (ϕ); TA=25°C
40
0
400
20
60
80
100
%
nm
λ
OHL11701
V
λ
450 500 550 600 650 700
amber
red
yellow
Φ
V
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
10˚20˚40˚ 30˚
OHL01660
50˚
60˚
70˚
80˚
90˚
100˚
20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LR W5SM, LA W5SM, LY W5SM
2006-11-13 7
Durchlassstrom2)
Seite 16
Forward Current2)
page 16
IF = f (VF); TA = 25 °C
Relative Spannung2)
Seite 16
Relative Voltage2)
page 16
VF = VF - VF(25 °C) = f (Tj); IF = 400 mA
Relativer Lichtfluss2)7)
Seite 16
Relative Luminous Flux2) 7)
page 16
ΦV/ΦV(400 mA) = f (IF); TA = 25 °C
Relativer Lichtstrom2)
Seite 16
Relative Luminous Flux2)
page 16
ΦV/ΦV(25 °C)= f (Tj); IF = 400 mA
OHL02072
1.5
I
F
V
F
V
mA
10
1
3
10
5
5
10
2
1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.3
-60
-0.10 -40 -20 0 20 ˚C6040
T
j
100
OHL02984
V
F
V
-0.05
0
0.05
0.10
0.15
0.20
0.30
10101mA
210
I
F
3
OHL10788
V (400 mA)
V
5
V
Φ
V
Φ
101
10-1
5
100
OHL12880
0-40 ˚C
T
0.5
1.0
1.5
2.0
2.5
-20 0 20 40 60 100
j
-60
yellow
ΦV (25 ˚C)
V
Φ
amber
red
LR W5SM, LA W5SM, LY W5SM
2006-11-13 8
Dominante Wellenlänge2)
Seite 16
Dominant Wavelength2)
page 16
LR, λdom = f (Tj); IF = 400 mA
Dominante Wellenlänge2)
Seite 16
Dominant Wavelength2)
page 16
LA, λdom = f (Tj); IF = 400 mA
Dominante Wellenlänge2)
Seite 16
Dominant Wavelength2)
page 16
LY, λdom = f (Tj); IF = 400 mA
OHL02680
618
dom
λ
-60
˚C
nm
-40 -20 0 20 40 60 100
620
622
624
626
628
630
j
T
OHL02679
610
dom
λ
-60
˚C
nm
-40 -20 0 20 40 60 100
612
614
616
618
620
622
j
T
OHL02879
584
-60
˚C
nm
-40 -20 0 20 40 60 100
586
588
590
592
594
596
598
λ
dom
j
T
LR W5SM, LA W5SM, LY W5SM
2006-11-13 9
Maximal zulässiger Durchlassstrom
Max. Permissible Forward Current
IF = f (TS)
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle
D = parameter, TS = 25 °C
*The emitter die exhibits excellent performance
but slight package discoloration occurs at highest
temperatures. The median lifetime depends on the
application
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle
D = parameter, TS = 85 °C
0C
T
I
F
mA
OHL02699
100
200
300
400
500
600
S
20 40 60 80 120
1010
0
-2-3-4-5
1010 10
F
I
A
P
t
=
DT
210-1
10
t
p
10 s 10
OHL02697
T
t
P
I
F
0.5
1.0
1.5
2.0
2.5
1
0.1
0.5
0.2
0.033
0.05
0.005
0.01
0.02
D
=
Exemplarische durchschnittliche Lebens-
dauerfür mittlere Helligkeitsgruppe2)
Seite 17
Exemplary median Lifetime2)
page 17
for median Brightness Group
Bedingungen
Conditions
mittlere
Lebensdauer
median
Lifetime
Einheit
Unit
IF = 250 mA
TS = 25°C
50.000 Betriebsstunden
operating hours
IF = 400 mA
TS = 85°C
7.000 Betriebsstunden
operating hours
IF = 500 mA
TS = 125°C
TJ = 150°C
7.000*Betriebsstunden
operating hours
IF = 500 mA
TS = 150°C
TJ = 175°C
500*Betriebsstunden
operating hours
1010
0
-2-3-4-5
1010 10
F
I
A
P
t
=
DT
210-1
10
t
p
10 s 10
OHL02698
T
t
P
I
F
0.5
1.0
1.5
2.0
2.5
1
0.1
0.5
0.2
0.033
0.05
0.005
0.01
0.02
D
=
2006-11-13 10
LR W5SM, LA W5SM, LY W5SM
Maßzeichnung8)
Seite 16
Package Outlines8)
page 16
Kathodenkennung: Markierung
Cathode mark: mark
Gewicht / Approx. weight: 0.2 g
Gurtung / Polarität und Lage8)
Seite 16
Verpackungseinheit 800/Rolle, ø180 mm
Method of Taping / Polarity and Orientation8)
page 16
Packing unit 800/reel, ø180 mm
GPLY6147
6.2 (0.244)
5.8 (0.228)
1.9 (0.075)
1.7 (0.067)
Cathode
(R0.85 (0.033))
11.2 (0.441)
10.8 (0.425)
1.2 (0.047)
0.8 (0.031)
0...0.1 (0.004)
0.29 (0.011)
0.24 (0.009)
6.8 (0.268)
7.2 (0.283)
1.1 (0.043)
0.9 (0.035)
1.6 (0.063)
2.0 (0.079)
(ø4.2 (0.165))
ø0.81 (0.031)
4.25 (0.167)
5.35 (0.210)
5.25 (0.206)
ø0.73 (0.028)
4.15 (0.163)
Heat sink
C
A
Protection
Diode
0.65 (0.026)
0.45 (0.018)
OHAY0508
1.55 (0.061) 2 (0.079)
4 (0.157)
6.35 (0.250)
8 (0.315)
1.75 (0.069)
11.5 (0.453)
12.4 (0.488)
24 (0.945)
0.3 (0.012)
0.3 (0.012)
1.9 (0.075)
7.35 (0.289)
Cathode/Collector Side
LR W5SM, LA W5SM, LY W5SM
2006-11-13 11
Empfohlenes Lötpaddesign8)
Seite 16
IR-Reflow Löten
Recommended Solder Pad8)
page 16
IR Reflow Soldering
Thermal enhanced PCB
Thermisch optimiertes PCB3 Lötstellen
3 solder points
1.6 (0.063)
11.6 (0.457)
2.3 (0.091)
ø4.0 (0.157)
Heatsink attach
11.6 (0.457)
12.0 (0.472)
0.3 (0.012)
ø4.0 (0.157)
ø2.5 (0.098)
Kupfer
Copper
10 (0.394)
2.3 (0.091)
1.6 (0.063)
OHPY2844
Solder paste stencil
Lötpasten Schablone
Lötstopplack
Solder resist
Bare Copper
Freies Kupfer
Footprint
Empfohlene
Padgeometrie
Recommended
Solder Pad
Design
Achtung:
Anode und
Heatsink sind
elektrisch
verbunden
Attention:
Anode and
Heatsink are
electrically
connected
2006-11-13 12
LR W5SM, LA W5SM, LY W5SM
Lötbedingungen Vorbehandlung nach JEDEC Level 4
Soldering Conditions Preconditioning acc. to JEDEC Level 4
IR-Reflow Lötprofil für bleifreies Löten (nach J-STD-020B)
IR Reflow Soldering Profile for lead free soldering (acc. to J-STD-020B)
Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet
Note: Package not suitalbe for ultra sonic cleaning
OHLA0687
0
0
T
t
˚C
s
120 s max
50
100
150
200
250
300
Ramp Up
100 s max
50 100 150 200 250 300
Ramp Down
6 K/s (max)
3 K/s (max)
25 ˚C
30 s max
260 ˚C +0 ˚C
-5 ˚C
245 ˚C ±5 ˚C
240 ˚C
255 ˚C
217 ˚C
Maximum Solder Profile
Recommended Solder Profile
235 ˚C -0 ˚C
+5 ˚C
Minimum Solder Profile
10 s min
LR W5SM, LA W5SM, LY W5SM
2006-11-13 13
Barcode-Produkt-Etikett (BPL)
Barcode-Product-Label (BPL)
Gurtverpackung
Tape and Reel
Tape dimensions in mm (inch)
W P0P1P2D0E F
4 ± 0.1
(0.157 ± 0.004)
8 ± 0.1
(0.315 ± 0.004)
2 ± 0.1
(0.079 ± 0.004)
1.5 + 0.1
(0.059 + 0.004)
1.75 ± 0.1
(0.069 ± 0.004)
11.5 ± 0.1
(0.453 ± 0.004)
Reel dimensions in mm (inch)
A W Nmin W1W2 max
180 (7) 24 (0.945) 60 (2.362) 24.4 + 2 (0.961 + 0.079) 30.4 (1.197)
Sample
OHA12043
X - X - X(G) GROUP:
Lot Number(1T) LOT NO: (9D) D/C: Date Code
(X) PROD NO: Product Code
(6P) BATCH NO: Batch Number
Lx xxxx
Product Name
RoHS Compliant
Bin1: Bin Information Color 1
Bin2:
Bin3:
ML
2
Temp ST
260 C RT
Additional TEXT
R077 DEMY
PACKVAR: Packing Type
Product Quantity per Reel(Q)QTY:
Semiconductors
OSRAM Opto
Wavelength Group
Forward Voltage Group
Brightness Group
Bar Code
Bar Code
Bar Code
D
0
2
P
P
0
1
P
W
FE
Direction of unreeling
N
W
1
2
W
A
OHAY0324
Label
Gurtvorlauf:
Leader:
Trailer:
Gurtende:
13.0
Direction of unreeling
±0.25
160 mm
160 mm
400 mm
400 mm
24 + 0.3
0.1
2006-11-13 14
LR W5SM, LA W5SM, LY W5SM
Trockenverpackung und Materialien
Dry Packing Process and Materials
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und
einer Feuchteindikatorkarte
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im
Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter
anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien
Transportation Packing and Materials
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately after
bag opening.
Discard if circles overrun.
Avoid metal contact.
WET
Do not eat.
Comparator
check dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%
bake units
bake units
If wet,
change desiccant
If wet,
Humidity Indicator
MIL-I-8835
If wet,
Moisture Level 3Floor time 168 HoursMoisture Level 6Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
OHA02044
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
0245
(Q)QTY:
2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
0245
(Q)QTY:
2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
OSRAM
Barcode label
Packing
Sealing label
Barcode label
Moisture Level 3Floor time 168 HoursMoisture Level 6Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
LR W5SM, LA W5SM, LY W5SM
2006-11-13 15
Anm.: Gemäß IEC 60825-1 (EN 60825-1) gilt:
Note: According IEC 60825-1 (EN 60825-1):
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components9)
page 16
may only be used in life-support devices or systems10)
page 16
with the express written approval of
OSRAM OS.
Revision History: 2006-11-13
Previous Version: 2006-11-10
Page Subjects (changes since last revision) Date of change
4, 7 Temperature coefficient of VF2005-10-13
1, 4 max. Optical efficiency 2005-11-02
4Forward voltage 2005-11-25
3, 9 completely rework 2005-12-21
11 solder pad reworked 2006-01-24
1, 11, 12 acc. to OS-PCN-2006-020-A 2006-06-20
9Lifetime table 2006-11-10
3Junction temperature 2006-11-13
OHW12884
LED STRAHLUNG
NICHT DIREKT MIT OPTISCHEN
INSTRUMENTEN BETRACHTEN
LED KLASSE 1M
OHW02884
LED RADIATION
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT
LR W5SM, LA W5SM, LY W5SM
2006-11-13 16
Fußnoten:
1) Helligkeitswerte werden mit einer
Stromeinprägedauer von 25 ms und einer
Genauigkeit von ± 11% ermittelt.
2) Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische technische oder
abgeleitete Parameter nur aufgrund statistischer
Werte wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
oder abgeleiteten Werten unterscheiden können. Falls
erforderlich, z.B. aufgrund technischer
Verbesserungen, werden diese typischen Werte ohne
weitere Ankündigung geändert.
3) -
4) Für weitere Informationen siehe Applikationsschrift im
Internet (www.osram-os.com).
5) Wellenlängen werden mit einer Stromeinprägedauer
von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
6) Spannungswerte werden mit einer
Stromeinprägedauer von 1 ms und einer Genauigkeit
von ±0,05 V ermittelt.
7) Im gestrichelten Bereich der Kennlinien muss mit
erhöhten Helligkeitsunterschieden zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden.
Dimmverhältnis im Gleichstrom-Betrieb max. 5:1.
8) Maße werden wie folgt angegeben: mm (inch)
9) Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden Apparaten oder Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer Fehlfunktion dieses lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
10) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden,
dass die Gesundheit und das Leben des Patienten in
Gefahr ist.
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
Remarks:
1.) Brightness groups are tested at a current pulse
duration of 25 ms and a tolerance of ± 11%.
2) Due to the special conditions of the manufacturing
processes of LED, the typical or calculated data of
technical parameters can only reflect statistical
figures. These do not necessarily correspond to the
actual parameters of each single product, which could
differ from the typical or calculated data of the typical
characeristic line. If requested, e.g. because of
technical improvements, these typ. data will be
changed without any further notice.
3) -
4) For further information please find the application note
on our web site (www.osram-os.com).
5) Wavelengths are tested at a current pulse duration of
25 ms and a tolerance of ±1 nm.
6) Forward voltages are tested at a current pulse
duration of 1 ms and a tolerance of ±0.05 V.
7) In the range where the line of the graph is broken, you
must expect higher brightness differences between
single LEDs within one packing unit.
Dimming range for direct current mode max. 5:1
8) Dimensions are specified as follows: mm (inch)
9) A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
10) Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health
and the life of the user may be endangered.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Osram Opto Semiconductor:
LR W5SM-GZHZ-1-Z LY W5SM-HXJX-35-Z LY W5SM-HYJY-46-Z LY W5SM-HZJZ-35-Z LY W5SM-HZJZ-46-Z LR
W5SM-HYJY-1-Z LA W5SM-HZJZ-24-Z LY W5SM-GZJX-46-Z LA W5SM-HXJX-24-Z LY W5SM-GYHZ-35-Z LY
W5SM-HZJZ-46-1 LY W5SM-HZJZ-36-1 LY W5SM-HZJZ-35-1