Pluggable Module - Optocoupler 1/1
Front-entry , DC 5 V Data sheet
WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.com
Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web: http://www.wago.com
Subject to design changes
12.06.2007 / d475200e.doc
1
+
R
2
-
3
A1
+
A2
-
A2
-
L
Description Item-No. Pack.-unit
pcs
Optocoupler, input DC 5 V, output DC 24 V, positive switching
286-752/002-000 1
• Installation on terminal block for pluggable module.
Technical Data
Input nominal voltage UN DC 5 V
Input voltage range DC 2-6.25 V
Input current range 3.3-18.5 mA
Current at UN 14 mA
Output nominal voltage DC 24 V
Output voltage range DC 20-30 V
Max. permissible
continuous current 500 mA
Reverse voltage
Transistor/triac DC 80 V
Switch on/switch off time <5 µs / <10 µs
Max. frequency 25 kHz
Leakage current at UN 2.5 µA
Collector/emitter
voltage drop UCE sat ≤1.2 V
Max.output (reverse current) 12 mA
Test voltage input/output 2.5 kVrms
Nominal voltage
acc. to VDE 0110 / 1.89 250 V / 4 kV / 3
Ambient operating temperature -25 °C...+40 °C
Storage temperature -40 °C...+70 °C
Module dimensions (W x H) (15 x 82,5*) mm / (0.591 x 3.25*) in
* from upper edge of DIN 35 rail
Standards / prescriptions IEC 664/ IEC 664A/ DIN VDE 0110
Pollution degree 2
Overvoltage category III
Accessories
Terminal block 280-609
Dimensions (W x D) (17 x 73) mm / (0.669 x 2.874) in
