CPC1200DC-1 - C&D Technologies, Inc.

cPCI200-DC REV A 7/2003

180/225 Watt, 3U x 4HP CompactPCI

cPCI200DCcPCI200DC

cPCI200DC

Corporate: www.cdtechno.com

Product: www.cdpoweronline.com

z3U X 4HP

z36-72 VDC Input Range

z180/225 Watt Continuous Output

Power

zComplies with PICMG 2.11 R1.0 with

47 Pin I/O Connector

zHot-Swap Capable

zOutputs Individually Protected

Against Overloads; Automatic

Recovery

zPCI VoltageArchitecture

(5V, 3.3V,+12V,-12V)

zIPMI Capability (Available on Part

Numbers cPCI200D-3 and 4)

The cPCI200DC is a family of high-

reliability, 200 watt power supplies for

3U Compact PCI™ systems. Developed

to support hot-swap, redundant

operation, the cPCI200DC Series is

designed for compliance with PICMG™

2.11 R1.0 Power Interface Specif ication

with 47-pin I/O connector. A vailable with

IPMI functionality (part numbers

cPCI200D-3 and cPCI200D-4) , this unit

was developed with high-availability

OUTPUT

SPECIFICATIONS, ALL MODELS

INPUT

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

Input Operating Voltage Vin 36 72 VDC

Input Voltage Withstand 34 75 VDC

Inrush Current Ii36VDC input < 20 APK

72VDC input < 40 APK

Efficiency η48VDC input, full load 70 %

(HA) telecommunications applications in

mind. Current sharing and internal ORing

diodes are included to support these and

other applications requiring reliable, hot-

swap performance and N+1 redundant

configuration. The 4HP package and

complement of agency approvals provide

for an advanced, high-density, high-

efficiency power solution for your

CompactPCI™ system requirements.

IOUT

VOUT RATED OUTPUT CURRENTOUTPUT

OUTPUT NUMBER RATED OUTPUT VOLTAGE Min A* B** REGULATION

V1 +5.0VDC 0A 18.0 A1 27.0 A +4 / -2%

V2 +3.3VDC 0A 27.0 A 27.0 A1+4 / -2%

V3 +12.0VDC 0A 4.0 A1 4.0 A1+/-10%

V4 -12.0VDC 0A 4.0 A1 4.0 A1+/-10%

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

Temperature Coefficient TC0.02 %/°C

PARD 20MHz bandwidth 50 mVP-P

all outputs or 1.5% P-P

whichever is greater

Output Power 50°C max temp., 300lfm airflow 180/225 W

Minimum Load V1 (config A, 180W) 500 mA

V2 (config B, 225W) 500 mA

NOTES: Outputs share common return.

* Total output power not to exceed 180W.

** Total output power not to exceed 225W.

1 Maximum combined power not to exceed 90 Watts.

cPCI200-DC REV A 7/2003

Product: www.cdpoweronline.com

Transient Response

For a step load change of 50%-100%-50%, the peak output

excursion will not exceed 10% of nominal voltage, and will

recover to within 1% of nominal voltage within 500 microseconds.

Current Share

Activ e current sharing on Outputs V1and V2. Accuracy better than

10% of maximum rated load. Primary referenced.

Remote Sense

Outputs V1and V2 are capable of compensating >50mV of line

drop. Unit automatically reverts to local sensing in the event that

the sense leads are opened for any reason. Unit is protected against

reversed or shorted sense leads.

Output Power

180W (Output configuration A) / 225W (Output configuration

B) continuous maximum, with 300lfm airflow at a maximum

ambient of 50°C. Derate to 90W/110W at 70°C.

Overload Protection

Outputs are individually protected against overloads and

indefinite short circuit with automatic recovery upon removal of

the fault condition.

Over Voltage Protection

Outputs V1 and V2 have Over Voltage Protection a t 125% typical

(135% max.) of nominal.

Over Temperature Protection

Outputs are protected against over temperature. Outputs will

automatically restore upon recovery to acceptable temperatures.

Output Fault Isolation

Output isolation diodes are present in all outputs to isolate faults

within a failed power supply.

Remote Inhibit (INH#)

Secondary referenced, active low, TTL compatible signal inhibits

all outputs upon activation.

IPMI Option

Available on Models cPCI200D-3 and cPCI200D-4

An I2C board is available as a factory-installed option to provide

SPECIFICATIONS, ALL MODELS

an IPMI interface to the SM bus. Status functions include output

voltage and current levels as well as the DEG warning. Output

inhibit control can be toggled under software command. For a

complete specification of the firmware solution refer to

Application Note ACAN-02 on our website.

Power Fail Warning (FAL#)

Open collector signal indicates output failure. Active low.

Enable (EN#)

Short pin on connector will enable power supply output when

the mating pin is grounded. Supply will not power up until this

pin is engaged to its mate in the backplane. Unit output will be

inhibited as pin is disengaged from the mating connector.

Temperature Warning (DEG#)

Open collector indicates internal temperatures are approaching

the thermal shutdown limit (+/-10°C, typ). Active low.

Fault Indicator LED

A red LED will be ON if output voltages are not within

specification.

Power Present LED

A green LED will be ON when input voltage is present and above

the minimum requirement.

Cooling

300lfm of airflow required to maintain full output power at 0-

50°C ambient.

Temperature

Full output power achievable over the range of 0-50°C. Storage

temperature limits are –20 to +85°C.

Altitude

Operating: -200 to +10,000 feet with ambient temperature

derating above 5,000 feet in accordance with the adiabatic lapse

rate (approximately 2C per 1000 feet).

Inhibit Indicator LED (Yellow)

A yellow LED will be ON when the outputs are inhibited.

zComplies with IPMI V1.5 Rev 1.1 and IPMB V1.0

zComplies to PICMG 2.9 (CompactPCI Systems Manage-

ment Specification)

z8 analog inputs configured for monitoring voltages and currents

on power supply outputs V1 - V4

zMonitors the state of the thermal sensor

zOutput inhibit can be controlled by IPMI commands

zSelf Test with LED indicator (can be read and overridden

by IPMI commands)

z6 programmable thresholds on each analog sensor

zEach threshold on each sensor can be enabled to generate

event messages if that threshold is crossed

zThermal sensor can be enabled to generate event messages

zResponds to all mandatory IPMI commands and numerous

optional commands as indicated in the functional specifi-

cation

zFirmware can be upgraded via the IPMB bus

zIncludes Device SDR’s (Sensor Data Records) - These

specify the type of sensor for each input (voltage, current,

temperature, etc.) as well as the conversion formulas from

raw ADC data to voltages, currents, etc.

zIncludes FRU data such as model number, serial number

and firmware creation date

IPMI/IPMB POWER SUPPLY SATELLITE CONTROLLER FEATURES

AVAILABLE ON PART NUMBERS cPCI200D-3 AND cPCI200D-4

cPCI200-DC REV A 7/2003

Product: www.cdpoweronline.com

NOTES: All measurements are in inches.

Weight: 1.4 lbs. (636g) net

MECHANICAL

PIN ASSIGNMENT: Pin assignment consistent with PICMG™ 2.11R1.0 specification. The table below details the PICMG™ assignment.

NOTES: (1) Pin numbers correspond to the female backplane connector.

(2) L = Long Length Pin (First Make, Last Break); M = Medium

Length Pins; S = Short Length Pins (Last Make, First Break)

Pin # 1 Staging 2 Signal Name Description

1-4 M V1 V1 Output

5-12 M RTN V1 and V2 Return

13-18 M V2 V2 Output

19 M RTN V3 Return

20 M V3 V3 Output

21 M V4 V4 Output

22 M RTN Signal Return

23 M RESERVED Reserved

24 M RTN V4 Return

25 M GA0 Geographic Address Bit 0

26 M RESERVED Reserved

27 S EN# Enable

28 M GA1 Geographic Address Bit 1

29 M V1ADJ V1 Adjust

30 M V1 SENSE V1 Remote Sense

31 M GA2 Geographic Address Bit 2

32 M V2ADJ V2 Adjust

33 M V2 SENSE V2 Remote Sense

34 M S RTN Sense Return

35 M V1 SHARE V1 Current Share

36 M V3 SENSE V3 Remote Sense

37 M IPMB SCL IPMB Serial Clock Line

38 M DEG# Degrade Signal

39 M INH# Inhibit

40 M IPMB SDA IPMB Serial Data Line

41 M V2 SHARE V2 Current Share

42 M FAL# Fail Signal

43 M IPMB PWR IPMB Power Input

44 M V3 SHARE V3 Current Share

45 L CGND Chassis Grnd (Safety Grnd)

46 M ACN/+DC IN AC Input Neutral/+DC Input

47 M ACL/-DC IN AC Input Line/-DC Input

MECHANICAL

Shock: MIL-STD-810d, Method 516.3, Procedure 1.

Vibration: MIL-STD-810d, Method 514.3, Procedure 1.

Dimensions: 3U x 4HP x 160mm (see Mechanical above)

EMC & SAFETY

EMI: NEBS Compliant to GR1089 conducted emissions limit

ETSI Compliant to ETS 300-386 conducted emissions

limit

Safety Agency Ratings 180 Watt 225 Watt

Input Voltage: 36-72 VDC 36-72 VDC

Input Current: 7A 9A

Input Power: 260W 320W

Agency Approvals Pending

UL1950/CSA950, EN60950, CE Mark.

(Low Voltage Directive)

cPCI200-DC REV A 7/2003

Product: www.cdpoweronline.com

Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to

be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or

completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby

disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising

from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose

and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace

applications.

Power Electronics Division, Americas

3400 E Britannia Drive, Tucson, Arizona 85706

Tel: 800.547.2537 Fax: 520.295.4197

C&D Technologies, EMEA/Asia Pacific

Milton Keynes MK14 5BU UK

Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545

ORDERING INFORMATION

PART NUMBER POWER +5V +3.3V +12V -12V IPMI

cPCI200D-4 225 W 27A 27A 4A 4A YES

cPCI200D-3 180 W 18A 27A 4A 4A YES

cPCI200D-2 225 W 27A 27A 4A 4A NO

cPCI200D-1 180 W 18A 27A 4A 4A NO