SPEC NO: DSAD9295 REV NO: V.10A DATE: MAY/13/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000761
30.6mm (1.2 INCH) 5x7 DOT MATRIX DISPLAY
Part Number: TC12-11SURKWA Hyper Red
Features
z1.2 inch matrix height.
zDot size 3mm.
zLow current operation.
zHigh contrast and light output.
zColumn cathode and column anode available.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white dot.
zRoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD9295 REV NO: V.10A DATE: MAY/13/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000761
Selection Guide
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd) [1]
@ 10mA Description
Min. Typ.
TC12-11SURKWA Hyper Red (AlGaInP) White Diffused
52000 130000
*21000 *40000
Column Cathode
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 645 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA
C Capacitance Hyper Red 35 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
IR Reverse Current Hyper Red 10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAD9295 REV NO: V.10A DATE: MAY/13/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000761
Hyper Red TC12-11SURKWA
SPEC NO: DSAD9295 REV NO: V.10A DATE: MAY/13/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000761
PACKING & LABEL SPECIFICATIONS TC12-11SURKWA
SPEC NO: DSAD9295 REV NO: V.10A DATE: MAY/13/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000761
SPEC NO: DSAD9295 REV NO: V.10A DATE: MAY/13/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000761
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes