Data sheet| Item number:713-1104/000-047 1-conductor female connector, 2-row; 100% protected against mismating; direct marking; 1.5 mm; Pin spacing 3.5 mm; 8-pole; 1,50 mm; black www.wago.com/713-1104_000-047 i Picture differs from the item. Color: L = [(pole no./2) - 1] x pin spacing + 5.2mm Coding finger (red circle) Item description Universal connection for all conductor types Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 1/8 Data sheet| Item number:713-1104/000-047 www.wago.com/713-1104_000-047 Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross-sections up to 1.5 mm2 High-density, wire-to-board connections in very confined spaces Centered strain relief plate anchors conductors, while acting as convenient connection and disconnection handle. It also provides easy access to operating slots - even when wired. Coding fingers provide 100% protection against mismating Safety information 1: The MCS - MULTI CONNECTION SYSTEM includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Data Electrical data Ratings per IEC/EN 60664-1 Ratings per IEC/EN 60664-1 Nominal voltage (III/3) 80V Rated surge voltage (III/3) 2.5kV Rated voltage (III/2) 160V Rated surge voltage (III/2) 2.5kV Nominal voltage (II/2) 250V Rated surge voltage (II/2) 2.5kV Rated current 10A Legend (ratings) (III / 2) Overvoltage category III / Pollution degree 2 Ratings per UL 1059 Approvals per UL 1059 Rated voltage UL (Use Group B) 300V Rated current UL (Use Group B) 10A Rated voltage UL (Use Group C) 50V Rated current UL (Use Group C) 10A Ratings per CSA Approvals per CSA Rated voltage CSA (Use Group B) 300V Rated current CSA (Use Group B) 10A Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 2/8 Data sheet| Item number:713-1104/000-047 www.wago.com/713-1104_000-047 Connection data Connection technology CAGE CLAMP(R) Actuation type Operating tool Solid conductor 0.08 ... 1.5mm/ 28 ... 16AWG Fine-stranded conductor 0.08 ... 1.5mm/ 28 ... 16AWG Fine-stranded conductor; with insulated ferrule 0.25 ... 1mm Fine-stranded conductor; with uninsulated ferrule 0.25 ... 1mm Strip length 6 ... 7mm/ 0.24 ... 0.28inch Pole No. 8 Total number of connection points 8 Total number of potentials 8 Number of connection types 1 Number of levels 2 Conductor entry direction to mating direction 0 Physical data Pin spacing 3.5mm/ 0.138inch Width 15.5mm/ 0.61inch Height 18.8mm/ 0.74inch Depth 16mm/ 0.63inch Plug-in connection Contact type (pluggable connector) Female connector/socket Connector (connection type) for conductor Mismating protection Yes Material data Color black Material group II Insulation material Glass fiber-reinforced polyamide (PA66 GF) Flammability class per UL94 V0 Clamping spring material Chrome nickel spring steel (CrNi) Contact material Copper alloy Contact plating tin-plated Fire load 0.067MJ Weight 4.3g Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 3/8 Data sheet| Item number:713-1104/000-047 www.wago.com/713-1104_000-047 Weight 4.3g Environmental requirements Limit temperature range -60 ... +100C Commercial data Product Group 3 (Multi Conn. System) Packaging type BOX Country of origin PL GTIN 4050821176435 Customs tariff number 85366990990 Approvals / Certificates Country specific Approvals Logo Approval Additional Approval Text Certificate name CCA DEKRA Certification B.V. EN 61984 2169947.01 CCA DEKRA Certification B.V. IEC 61984 NL-30980 UL-Approvals Logo Approval Additional Approval Text UR Underwriters Laboratories Inc. UL 1059 Certificate name E4517219950922 Counterpart Item no.713-1424 www.wago.com/713THT male header, 2-row; 0.8 x 0.8 mm solder pin; angled; 100% protected against mismating; Pin spacing 3.5 1424 mm; 8-pole; black Item no.713-1404 THT male header, 2-row; 0.8 x 0.8 mm solder pin; straight; 100% protected against mismating; Pin spacing 3.5 mm; 8-pole; black www.wago.com/7131404 Compatible products Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 4/8 Data sheet| Item number:713-1104/000-047 www.wago.com/713-1104_000-047 Compatible products ferrule Item no.: 216-101 Ferrule; Sleeve for 0.5 mm / AWG 22; uninsulated; electro-tin plated; silver-colored www.wago.com/216-101 Item no.: 216-102 Ferrule; Sleeve for 0.75 mm / AWG 20; uninsulated; electro-tin plated; silver-colored www.wago.com/216-102 Item no.: 216-103 Ferrule; Sleeve for 1 mm / AWG 18; uninsulated; electro-tin plated www.wago.com/216-103 Item no.: 216-121 Ferrule; Sleeve for 0.5 mm / AWG 22; uninsulated; electro-tin plated; silver-colored www.wago.com/216-121 Item no.: 216-122 Ferrule; Sleeve for 0.75 mm / AWG 20; uninsulated; electro-tin plated; silver-colored www.wago.com/216-122 Item no.: 216-123 Ferrule; Sleeve for 1 mm / AWG 18; uninsulated; electro-tin plated; silver-colored www.wago.com/216-123 Item no.: 216-131 Ferrule; Sleeve for 0.25 mm / AWG 24; uninsulated; electro-tin plated; silver-colored www.wago.com/216-131 Item no.: 216-132 Ferrule; Sleeve for 0.34 mm / AWG 24; uninsulated; electro-tin plated www.wago.com/216-132 Item no.: 216-141 Ferrule; Sleeve for 0.5 mm / 20 AWG; uninsulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 1/08.92 www.wago.com/216-141 Item no.: 216-142 Ferrule; Sleeve for 0.75 mm / 18 AWG; uninsulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 1/08.92 www.wago.com/216-142 Item no.: 216-143 Ferrule; Sleeve for 1 mm / AWG 18; uninsulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 1/08.92 www.wago.com/216-143 Item no.: 216-151 Ferrule; Sleeve for 0.25 mm / AWG 24; uninsulated; electro-tin plated www.wago.com/216-151 Item no.: 216-152 Ferrule; Sleeve for 0.34 mm / AWG 24; uninsulated; electro-tin plated www.wago.com/216-152 Item no.: 216-201 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated; white www.wago.com/216-201 Item no.: 216-202 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; gray www.wago.com/216-202 Item no.: 216-203 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; red www.wago.com/216-203 Item no.: 216-221 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated; white www.wago.com/216-221 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 5/8 Data sheet| Item number:713-1104/000-047 www.wago.com/713-1104_000-047 Item no.: 216-222 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; gray www.wago.com/216-222 Item no.: 216-223 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; red www.wago.com/216-223 Item no.: 216-241 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; white www.wago.com/216-241 Item no.: 216-242 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; gray www.wago.com/216-242 Item no.: 216-243 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; www.wago.com/216-243 acc. to DIN 46228, Part 4/09.90; red Item no.: 216-262 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; gray www.wago.com/216-262 Item no.: 216-263 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; www.wago.com/216-263 acc. to DIN 46228, Part 4/09.90; red Item no.: 216-301 Ferrule; Sleeve for 0.25 mm / AWG 24; insulated; electro-tin plated; yellow www.wago.com/216-301 Item no.: 216-302 Ferrule; Sleeve for 0.34 mm / 22 AWG; insulated; electro-tin plated; green www.wago.com/216-302 Item no.: 216-321 Ferrule; Sleeve for 0.25 mm / AWG 24; insulated; electro-tin plated; yellow www.wago.com/216-321 Item no.: 216-322 Ferrule; Sleeve for 0.34 mm / 22 AWG; insulated; electro-tin plated; green www.wago.com/216-322 Strain relief plate Item no.: 713-126 Strain relief plate; black www.wago.com/713-126 Item no.: 210-647 Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft; multicoloured www.wago.com/210-647 Item no.: 210-719 Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft www.wago.com/210-719 tools Downloads Documentation Additional Information Technical explanations Apr 3, 2019 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com pdf Download 2.0 MB Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 6/8 Data sheet| Item number:713-1104/000-047 www.wago.com/713-1104_000-047 2.0 MB Installation Notes Conductor termination Inserting a conductor via (2.5 x 0.4) mm screwdriver. Locking lever Lever as a lock - when closed, female connector is locked. Lever as a disconnection aid - when opened, female connector is disconnected. Screw interlock can only be disconnected using a tool. Rotating the lever lifts the female connector out of the male header. Coding Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 7/8 Data sheet| Item number:713-1104/000-047 www.wago.com/713-1104_000-047 Coding a female connector by removing coding finger(s). Installation Centered strain relief plate anchors conductors for easy disconnection. Product family MCS MINI HD Show all products from the family Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.02.2021Page 8/8