SIMATIC Ident RFID systems RF300 MDS D425 Compact Operating Instructions Characteristics MDS D425 Characteristics Field of application Compact and rugged ISO transponder; suitable for screw mounting Use in assembly and production lines in the powertrain sector; ideal for mounting on motors, gearboxes, and workpiece holders Memory FRAM 2048 bytes gross Read/write range See Chapter Field data (Page 2). Mounting on metal Yes High resistance Rugged packaging of the MDS D425; can therefore also be used under extreme environmental conditions without problem Standard Oriented according to ISO-15693 2000 bytes net Ordering data Table 1 Ordering data of MDS D425 Order number MDS D425 6GT2600-4AG00 Safety instructions for the device/system NOTICE This device/system may only be used for the application instances that have been described in the catalog and the technical documentation "SIMATIC RF300 System Manual (http://support.automation.siemens.com/WW/view/en/21738946)" and only in combination with third-party devices and components recommended and/or approved by Siemens. (c) Siemens 2010 J31069-D0238-U001-A1-7618, 10/2010 1 Application example of MDS D425 0'6' 0RWRUEORFN 6/* &R 0DLQILHOG Figure 1 QY H\ R UG LUH F WL RQ Application example Field data Table 2 Field data MDS D425 - RF300 reader RF310R Operating distance (Sa) RF340R RF350R / ANT 12 RF350R / ANT 18 RF350R / ANT 30 RF350R / ANT 1 RF380R 2 ... 14 2 ... 20 0...5 0 ... 10 0 ... 15 2 ... 25 2 ... 35 18 30 7 14 20 35 50 Transmission window (Lx/Ly) 30 / 30 45 / 45 8 17 25 40 / 40 80 / 50 Minimum distance from MDS to MDS > 100 > 150 > 30 > 50 > 60 > 150 > 300 Limit distance (Sg) All values are in mm 2 MDS D425 J31069-D0238-U001-A1-7618, 10/2010 Technical specifications Table 3 Technical data of MDS D425 Memory size 2048 bytes Memory configuration Serial number Configuration memory Application memory 8 bytes (fixed code) 40 bytes 2000 bytes Storage technology FRAM Memory organization 2048 bytes gross 2000 bytes net Ambient temperature During operation Transport and storage -25 C to +85 C -40 C to +125 C Weight, approx. 35 g 1) 2) 3) 2 hours, 2 m, +20 C steam jet: 150 mm; 10 to 15 l/min; 100 bar; 75 C The values for shock and vibration are maximum values and must not be applied continuously. Note It is recommended that a test is performed in critical applications. When using the OPT area, subtracted in 8 byte blocks Protocol ISO 15693 Data retention (at +40 C) 10 years MTBF 2 106 h Data transmission rate approx. 2 ms / byte Dimension drawing 16 bytes of it must be *7$* 0'6' $6$ for read and write Read cycles Unlimited Write cycles at +40 C, typical > 1010 Read/write distance (Sg) See Chapter Field data (Page 2) Distance from metal Can be mounted on metal Power supply Inductive power transmission (without battery) Degree of protection to EN 60529 Shock, tested in accordance with IEC 68-227 IP68 1) IPx9K 2) 50 g 3) Vibration, tested in 20 g 3) accordance with IEC 68-2-6 Torsion and bending load Enclosure Color Material Dimensions (D x H) in mm MDS fixing Yes Not permissible Black Plastic PA 6.6 GF; thread: Stainless steel 18(1) x 10(1) (without thread), thread M6 Screws, tightening torque (at room temperature) 6 Nm 5 Bulk detection/multitag capability 0 Dimensions in mm Figure 2 Dimension drawing of MDS D425 Service & support Technical support Phone: + 49 (0) 911 895 7222 Fax: +49 (0) 911 895 7223 E-mail (mailto:support.automation@siemens.com) Internet: Online support request form: (www.siemens.com/automation/support-request) Service & support at IA/DT Support homepage (www.siemens.com/automation/service&support) RFID homepage For general information about our identification systems, visit RFID homepage (http://www.siemens.com/simaticsensors). MDS D425 J31069-D0238-U001-A1-7618, 10/2010 3