Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 19 N SERIES MINI MODULE HypertacO mini-modular connectors employ a do-it-yourself system based on the building block principle. They offer a variety of combinations available in a single connector frame. Therefore, the user is capable of selecting the connector that fulfills the exact requirements with off-the-shelf components. One of the many advantages of the HypertacO contact is its low insertion and extraction forces. In this application the user is able to assemble a significantly large number of contacts into a connector which is still able to mate and unmate smoothly and easily The N series can be built up for the following: Rack and panel applications -- Standard -- With keying system -- With locking systems -- With floating mounting Cable applications -- Hooded with rounded or flat cable security clamps -- With jack screws Programming applications The system is composed of two basic elements: the modules and the frames. 1. The modules are the connector elements of the system. Two types of contacts are available: signal and power. These contacts are housed in small plastic blocks. All contacts are removable for easy assembly and repair. The width of each module block is designated in units. Please see pages N5--N7. The modules have 10 contacts @ 4 2. Amps The frames hold the5 modules (Type P & K), contacts in @ position. 9 Amps They range from a basic frame consisting 2 (Type T), 4 coax @ 509s (Type V), andof45 side rails and 2 end caps to more complex contacts @ 1 Amp (Type H). versions with jackscrews, hoods, cable 2. The frames modules in position. clamps, etc. hold All the frames are available in They range from a basic frame consisting of 2 various lengths to conform to almost any side rails and of 2 end caps to more complex combination modules. Although any versions with jackscrews, hoods, length is possible, we suggest orderingcable one clamps, etc. All frames are available in of the standard lengths for optimum delivery various lengths to conform to almost any and price. This can be accomplished by filling combination of modules. Although in any empty spaces with blank modules.any length is possible, we suggest ordering one With the N series, of the standard lengths specially for optimumdesigned delivery connectors can be purchased quickly and and price. This can be accomplished by filling inexpensively, eliminating the extra cost and in any empty spaces with blank modules. delay of custom tooling. With the N series, specially designed connectors can be purchased quickly and inexpensively, eliminating the extra cost and delay of custom tooling. Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 19 Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 20 N SERIES MINI MODULE Module H Width is 2 units 45 Crimp Contacts .016 (.40mm) contacts GENERAL SPECIFICATIONS .177 (4.49) .431 (10.95) 1.180 (29.98) Replacement Contacts: Male .065 (1.65) Typ. Crimp: 26-28AWG Male Pin: YPN004--010H Female Socket: YSK004--020AH Wire Strip Length: 26-28 AWG CAGE 50541 .909 (23.10) .199 .065 (5.06) (1.65) Typ. .184 (4.68) 1) 2) 3) 4) 5) Accessories Crimp tool: AFM8 or M22520/2--01 Positioner: Socket =T1974 Pin = T1973 Insertion tool: T1970 Female <8 milliohms .3 -- 1.6 oz. Contact Life Cycles Breakdown voltage Dielectric Withstanding Voltage Insulation Resistance 100,000 >750V RMS Temperature Rating Insulator Contact Material: (pin) (socket) --55 C to + 125 C Nylon, 25% Glass Plating Reference .177 (4.49) Notes: 1 amp Current Rating Contact Resistance Extraction Force >500V RMS >103 megohms @ 500 VDC PhBz BeCu wires + brass body T = 10 in gold (min) over Ni TH = 50 in gold (min) over Ni TAH = 50 in gold (min) over Ni on mating surface, gold flash over Ni on termination ORDERING INFORMATION N H F R TAH For empty block, order ZNH045--001 Male contacts are shrouded in the insulator, female mounts in the plug frame are suggested. Crimp contacts will be shipped unassembled. For ordering information regarding modules assembled in frames, see pg. 4/30. Dimensions in inches (mm). Module K Width is 1 unit 10 Hypertac removable signal contacts .071 (1.80) .573 (14.55) .035 (.900) Hole .736 (16.70) .100 (2.54) A .857 (16.70) .055 (1.40) Female .697 (17.70) Notes: 1) For empty block, order ZNK010--001. 2) Contacts will be shipped unassembled 3) For ordering information regarding modules assembled in frames, see pg. 4/30. 4) Dimensions in inches (mm). 5) Crimping instructions Doc# S50063 4 / 20 .024" (.60mm) contacts Ref. H2 GENERAL SPECIFICATIONS Double crimp 22 AWG wire stripped back .146 (3.70) YPN006--019 (pin) YSK006--009 (socket) Ref. R B 1.180 (29.975) Termination Style: R Contact Gender: M = Male, F = Female TERMINAL STYLE File no. LR83002--4 Male Plating: T, TH, TAH Crimp 22 AWG wire stripped back .173 (4.40) YPN006--021 (pin) YSK006--011 (socket) .035 (.90) Dimension A Dimension B .051 (1.30) Ref. RR .039 (1.00) Hole Crimp 18--20 AWG wire YPN006--158 (pin) YSK006--089 (socket) .055 (1.39) Dimension A Dimension B .071 (1.80) stripped back .173 (4.40) Ref. S Solder cup 22 AWG YPN006--020 (pin) YSK006--010 (socket) Accessories Crimp tool: AFM8 Positioner: K547 Extraction tool: S/DEM1.0060 Current Rating Contact Resistance Extraction Force Contact Life Cycles Breakdown voltage Dielectric Withstanding Voltage: Insulation Resistance Temperature Rating Insulator Contact Material: (pin) (socket) Plating Reference 4 amps < 5 milliohms .5 -- 2 oz. 100,000 >1400V RMS >1050V RMS >105 megohms @ 500 VDC --55 C to + 105 C Glass filled Nylon Brass BeCu wires + brass body T = 10 in gold (min) over Ni TH = 50 in gold (min) over Ni TAH = 50 in gold (min) over Ni on mating surface, gold flash over Ni on termination ORDERING INFORMATION N K F S T Plating: T, TH, TAH Terminal Style: H2, R, RR & S Contact Gender: M = Male, F = Female Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 21 N SERIES MINI MODULE Width is 1 unit Module P 10 Hypertac Ref. D File no. E102195 File no. LR83002--4 Straight solder dip YPN006--047H (pin) YSK006--032AH (socket) .024 (.60) .181 (4.60) .035 (.90) Female Ref. R .100 (2.54) Crimp 22, 24 & 26 AWG stripped back .173 (44) YPN006--025H (pin) YSK006--015AH (socket) .181 (4.60) .039 (1.00) .057 (1.45) Ref. S .433 (11.00) .201 (5.10) .024 (.60) square Solder cup up to 22 AWG YPN006--026H (pin) YSK006--016AH (socket) stripped back Wire wrap YPN006--046H (pin) YSK006--031AH (socket) .992 (25.20) Notes: Module T File no. LR83002--4 .108 (2.75 .256 (6.5) .285 (7.25) .200 (5.08) 1.181 (30.00) .075 (1.90) .191 (4.84) 5 Hypertac .200 (5.08) .075 (1.90) Ref. R Crimp 14, 16, 18 & 20 AWG wire stripped back .285 (7.20) YPN015--016H (pin) YSK015--025AH (socket) Crimp tool: AF8 Positioner: TP687 Extraction tool:S/DEM5.0150 .108 (2.75 .185 (4.70) .047 (1.20) square .551 (14.00) .433(11.00) 4 amps Contact Resistance Extraction Force < 5 milliohms .5 -- 2 oz. 100,000 Contact Life Cycles Breakdown voltage >1400V RMS Dielectric Withstanding 1050 VRMS Voltage: Insulation Resistance >103 Megohms @ 500 VDC Temperature Rating Insulator Contact Material: (pin) (socket) 1.362 (34.60) Solder cup up to 13 AWG YPN015--017H (pin) YSK015--026AH (socket) Ref. V Wire wrap YPN015--018H (pin) YSK015--027AH (socket) For empty block, order ZNT005--001. Crimp contacts will be shipped unassembled. For ordering information regarding modules assembled in frames, see pg. 4/30. Dimensions in inches (mm). --55 C to + 105 C Glass filled Nylon Brass BeCu wires + brass body T = 10 in gold (min) over Ni TH = 50 in gold (min) over Ni TAH = 50 in gold (min) over Ni on mating surface, gold flash over Ni on termination Plating Reference ORDERING INFORMATION N P F S T Plating: T, TH, TAH Terminal Style: D, R, S & Y Contact Gender: M = Male, F = Female removable contacts Ref. S Female Notes: Accessories TERMINAL STYLE .059 (1.5) Current Rating Crimp tool: AFM8 Positioner: K623 Extraction tool:S/DEM1.0060 Width is 2 units File no. E102195 Male .024" (.60mm) contacts GENERAL SPECIFICATIONS Ref. Y 1) For empty block, order ZNP010--001 2) Crimp contacts will be shipped unassembled 3) For ordering information regarding modules assembled in frames, see pg. 4/30. 4) Dimensions in inches (mm) 5) Crimping instructions Doc# S50063 1) 2) 3) 4) Front removable D YPN006--493H (pin) YSK006--264AH (socket) .051 (1.30) .141 (3.57) .100 (2.54) Ref. FD .185 (4.70) .024 (.60) Male 1.181 (30.00) removable signal contacts TERMINAL STYLE .059 (1.50) contacts GENERAL SPECIFICATIONS Current Rating 9 amps Contact Resistance Extraction Force < 2.5 milliohms .7 -- 5 oz. Contact Life Cycles 100,000 Breakdown voltage >2000V RMS Dielectric Withstanding Voltage: 1500 Insulation Resistance Temperature Rating Insulator Contact Material: Plating Reference >105 megohms @ 500 VDC --55 C to + 105 C Glass filled Nylon (pin) (socket) Brass BeCu wires + brass body T = 10 in gold (min) over Ni TH = 50 in gold (min) over Ni TAH = 50 in gold (min) over Ni on mating surface, gold flash over Ni on termination ORDERING INFORMATION N T F S T Plating: T, TH, TAH Terminal Style: R, S & V Contact Gender: M = Male, F = Female Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 21 Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 22 N SERIES MINI MODULE ORDERING INFORMATION Module V Width: 2.5 1.5 Units Coax Termination Part Number Replacement Contacts Crimp Coaxial for RG316 NVFRTAH* YCX0315--002AH Crimp Coaxial for RG316DB NVFR1TAH* YCX0315--019AH Solder Coaxial for RG405 or T--Flex 405 NVFSTAH* YCX0315--001AH Crimp Coaxial for RG316 NVMRTH* YCX0315--004H Crimp Coaxial for RG316DB NVMR1TAH* YCX0315--018H Male Solder Coaxial for RG405 or T--Flex 405 NVMSTH* YCX0315--003H Female Straight Dip Coax NVFDTAH* Fixed Contacts cannot be removed Gender .441 (11.20) Female .200 (5.10) .290 (7.38) Female .290 (7.38) Male .512 (13.00) MALE CRIMP .129 .129 (3.27) (3.27) Contacts: 4 Hypertac(R) Contacts (on both signal & ground) Ref. R & R1 (Crimp) .290 .290 (7.38) (7.38) .020 (.51) .100 (2.54) .250 (6.35) .100 (2.54) 1.181 (30.00) .250 (6.35) .024 ( .061) .181 (4.60) .512 .433 (13.00) (11.00) .024 (.060) *Plating Reference H = 50 in gold (min) over Ni gold (min) Female Sockets: AH = 50 in Extraction over NiForce on mating surface, gold flash over Ni on termination Male Pins: File No.: UL E102195 Notes: 1) For ordering information regarding modules assembled in frames, see pg. 4/30 2) Dimensions in inches (mm) 4 / 22 Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 23 N SERIES MINI MODULE General Specifications TM COAXTAC ACCESSORIES For Inner Conductor Crimping Crimp tool: AFM8 Positioner: T1957 For Outer Conductor Crimping Crimp tool: HX3 Die Set: T1958 for RG316 T2019 for RG316DB Contact Removal Tool: T1982 Cabling Instructions Crimp (R) & (R1) Cable RG316 & RG316DB Solder (S) RG405 T--Flex 405 Socket S50302 S50301 S50307 Pin S50304 S50303 S50308 Please request specs from our Customer Service Department File No.: UL E102195 Nominal Impedance Frequency Range Temperature Rating Materials 50 ohms DC 3 GHz with RG316 DC 18GHz with RG405 --55 C to 125 C Brass, Beryllium, Copper PTFE Fluorocarbon Finishes Center Contacts and Gold over nickel Housings over copper Wire Gold over nickel Electrical (Based on RG--405 Semi Rigid Cable) Voltage Standing Wave Ratio (DC to 3GHz) 1.20:1 max. (3GHz to 18GHz) 1.50:1 max. RF Transmission Loss 0.50 dB @ 18 GHz Insulation Resistance 5,000 megohms min. Dielectric Withstanding Voltage 500 VRMS Contact Resistance Inner Contact 8 miliohms max. Outer Contact 2 milliohms max. Mechanical Extraction force 1.5 -- 6.0 oz max., 3 oz. average Connector Durability Greater than 25,000 cycles GENERAL SPECIFICATIONS Current Rating (Bundled) 25 amps (Free Air) 17 Amps Contact Resistance (milliohms) <1.5 milliohms Extraction Force 3.0 -- 17.0 oz. Contact Life Cycles >100,000 Breakdown voltage >1600 VRMS Dielectric Withstanding Voltage 1200 VRMS Insulation Resistance >104 megohms @ 500VDC Temperature Rating --55 deg. C to + 105 deg. C Insulator Nylon Contact material: BeCu wires + brass Approx. Weight: M: .32 oz. (9.15g), F: .34 oz. (9.50g) Notes: 1) For ordering information regarding modules assembled in frames, see pg. 4/30. 2) Dimensions in inches (mm) Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 23 Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 24 N SERIES MINI MODULE ORDERING INFORMATION Width: 2.5 Units Can be mounted by itself or in a frame Contacts: 4 Hypertac(R) Contacts Module V 25 Amp Power Gender Termination Female Crimp 25 Amp (Free Air) (17 Amps Bundled) 12--14 AWG Part Number NVFP1TAH * Replacement Contacts YSK025--031AH* .512 (13.00) .750 (19.05) .250 (6.35) Female Empty Block NVFH LVFH Male Empty Block NVMH NVFH .1.181 (30.00) .250 (6.25) .750 (19.05) .250 (6.35) .250 (6.25) 1.181 (30.00) .512 (13.00) .294 (7.48) .512 (13.00) Male .124 (3.15) Crimp 25 Amp (FreeAir) (17 Amps Bundled) 12--14 AWG NVMP1TH** 024H YPN025--24H GENERAL SPECIFICATIONS *Plating Plating Male Pins: Reference Reference Female Sockets: H= 50 in gold (min) over Ni Current Rating (Bundled) 25 amps (Free Air) 17 Amps (Bundled) Current Rating AH= 50 in gold (min) over Ni on mating Contact surface, Resistance gold flash over Ni on Extraction terminationForce Contact Resistance (milliohms) <1.5 milliohms Extraction Force 3.0 -- 17.0 oz. Contact Life Cycles >100,000 Breakdown voltage >1600 VRMS Dielectric Withstanding Voltage 1200 VRMS Insulation Resistance >104 megohms @ 500VDC ACCESSORIES Crimp tool: Extraction Tool: Positioner: M309 T1982 T1981 File No.: UL E102195 Notes: Temperature Rating --55 deg. C to + 105 deg. C Insulator Nylon Contact material: BeCu wires + brass Approx. Weight: M: .32 oz. (9.15g), F: .34 oz. (9.50g) 1) For ordering information regarding modules assembled in frames, see pg. 4/30 2) Dimensions in inches (mm) 3) Contact shipped unassembled 4 / 24 Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 25 N SERIES MINI MODULE FRAME B up to 775 contacts .709 (18.00) File no. LR83002--4 Single row, rack and panel with keying Built-in pin protection 36 possible keying arrangements Standard sizes: 7, 11, 15, 19, 23, 27, 31 & 35 unit lengths Up to 350 contacts on .100 (2.54) X .100 (2.54) centers Plug .369 (9.38) Plus X 1.402 .709 (35.60) (18.00) 1.181 (30.00) LR83002--4 SEQUENCE OF MODULES Plug SEQUENCE OF MODULES Receptacle .369 (9.38) Plus X .800 (20.32) Receptacle X .800 (20.32) 1.402 (35.60) 1.181 (30.00) .433 (11.00) X ORDERING INFORMATION 1.181 (30.00) N EB 7 .433 (11.00) SEQUENCE OF MODULES Frame Size: 7, 11, 15, 19, 23, 27, 31 & 35 units P = Plug, E = Receptacle FRAME BVup to 720 contacts Jackscrew extractor 36 possible keying options Accepts 22--28 AWG wires Single row, rack & panel with keys Standard sizes: 7, 11, 15, 19, 23, 27, 31 & 35 unit lengths. .787 (20.00) File no. LR83002--4 Up to 320 contacts on .100 (2.54) x .100 (2.54) centers Built-in pin protection Allow 3 units for jackscrew Plug 3 3.043 (77.30) .217 (5.50) .375 (9.50) 4 .709 (18.00) SEQUENCE OF MODULES AE .787 3002--4 0 s 3 3.043 (77.30) .217 (5.50) .375 (9.50) 4 .800 (20.32) 1.181 (30.00) Receptacle (20.00) .709 (18.00) Plug 1.402 1.181 (35.60) (30.00) .800 (20.32) .369 (9.38) Plus X X M 4.00.800 (20.32) 1.402 1.181 .300 (7.62) .185(35.60) .185(30.00) (4.70) (4.70) X .433 .181(4.60) 3 SEQUENCE OF MODULES (11.00) .800 .217 (5.50) M 4.00 4 (20.32) .375 (9.50) Receptacle .369 dimensions, pg. N15 (9.38) Plus X formation , pg. N16 for 1.402 1.181 X ectors (35.60) (30.00) h for p.c. boards 0.394 nches (mm) 1.402 (10.00) .185 .300 (7.62) .185 (35.60) (4.70) (4.70) X .433 .181(4.60) 3 (11.00) .217 (5.50) SEQUENCE OF MODULES .800 Notes: 4 .375 (9.50) .217 (5.5 (20 32 Notes: Notes: 1) See mounting dimensions, .375 (9.5pg. N15 1) See mounting dimensions, see pg 4/29 2) See ordering information , pg. N16 for 1) See mounting dimensions, pg. N15 2) See ordering information, see pg 4/30 complete connectors Frame Size: 7, 11, 15, 19, complete connectors 2) See ordering information , pg. N16 for 3) Standard 3) length for p.c.length boards 23, 27, 31 & 35 units Standard for p.c. boards complete connectors 4) For thicker specify longer 0.394 4)chassis, Dimensions inches studs (mm)with modification 470 3) Standard length for p.c.inboards (10.00) 5) Dimensions in inches (mm) 4) Dimensions in inches (mm) P = Plug, E = Receptacle ORDERING INFORMATION N E BV 7 Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 25 Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 26 N SERIES MINI MODULE FRAME up to to 400 900contacts contacts FRAME BY BY up 1/2 turn quick disconnect HHH 180 quick turn jack provides >15,000 mating cycles Single row, rack and panel HH Great for test equipment, burn-in stands, security Built-in pin protection H HH HH H HH HH HH HH HH H H systems, medical7, equipment, etc.27, 31, 35 unit lengths Standard sizes: 11, 15, 19, 23, <1 second mating/unmating operation Up to 400 contacts on .100 (2.54) x .100 (2.54) centers Crimp, solder solder,>15,000 and wire wrapcycles R 180 quick turncup, jack dip provides mating a terminations Crimp, solder cup, dip solder, and wire wrap terminations Wiping actionpin pinand andsockets sockets Wiping action Provides contacts inoperation a single mating <1 second20--400 mating/unmating 4Provides or 9 ampere contact mixed yourmating needs 20--400 contacts in a to single Built-in pin protection 5 or 9 ampere contacts mixed to your needs Standard sizes: 11, 15, 19, 23, 27, 31, 35 & 45 Built-in pinFrame protection Great for test equipment, burn-in stands, security systems, unit lengths medical equipment, etc. Allow 5 units for jack screw 4.33 (11.00) .217 (5.5)1 .375 (9.5)2 .500 3.875 (12.70) (98.42) .709 .728 (18.00) (18.50) NPBY 3 .823 (20.90) .800 (20.32) .369 (9.38) plus dim. X X 1.402 (35.60) 1.181 (30.00) ORDERING INFORMATION N E BY 7 Frame Size: 7, 11, 15, 19, 23, 27, 31, 35 units P = Plug, E = Receptacle SEQUENCE OF MODULES .185 (4.70) .500(12.7) X .185 (4.70) Notes: 1) See mounting dimensions, pg. N15 2) See ordering information, pg. N16 for complete connectors 3) Dimensions in inches (mm) NEBY Notes 1) St d d l Units X Y Z 11 1.400 (35.56) 1.993 (50.64) .884 (22.47) 15 1.800 (45.72) 2.393 (60.80) 1.084 (27.55) 19 2.200 (55.88) 2.794 (70.96) 1.284 (32.63) 23 2.600 (66.04) 3.194 (81.12) 1.484 (37.71) .181 (4.60) .827 (21.00) .433 (11.00) th f b .217 (5.5)1 .375 (9.5)2 d 27 31 35 45 3.000 3.400 3.800 4.800 (76.20) (86.36) (96.52) (121.92) 3.594 4.000 4.393 5.400 (91.28) (101.44) (111.60) (137.16) 1.684 1.884) 2.084 2.500 (42.79) (47.87) (52.95) (63.50) P = Plug (mates with receptacle type NEBY) Notes: 1) See mounting dimensions, pg pg.4/29. N15 2) See ordering information, pg. N16 for complete connectors pg 4/30 3) Dimensions in inches (mm) 4 / 26 Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 27 N SERIES MINI MODULE FRAME FRAMEJY JYup up to to 900 400 contacts contacts O File no. LR83002--4 H 180 quick turn jack provides >15,000 mating cycles H Great for test equipment, burn-in stands, security TYPE JY FRAME systems, medical equipment, etc. Cable OD 17.5mm to 25.4mm H <1 second mating/unmating operation H Crimp, solder cup, dip solder, and wire wrapR terminations Wiping action pin and sockets Provides 20--400 contacts in a single mating 4 or 9 ampere contact mixed to your needs Built-in pin protection Standard Frame sizes: 11, 15, 19, 23, 27, 31, 35 & 45 unit lengths H Adjustable Cable Clamp: .452 to 1.260 in (11.5 to 32.0 mm) H H H H H 2.398 (60.90) .709 3.052 (18.00) (77.52) 2.657 (67.50) 3.875 (98.42) NPJY 3 Y .551 (14.00) Z Units X Y Z 11 1.400 (35.56) 1.993 (50.64) .884 (22.47) 15 1.800 (45.72) 2.393 (60.80) 1.084 (27.55) 19 2.200 (55.88) 2.794 (70.96) 1.284 (32.63) 23 2.600 (66.04) 3.194 (81.12) 1.484 (37.71) 27 31 35 45 3.000 3.400 3.800 4.800 (76.20) (86.36) (96.52) (121.92) 3.594 4.000 4.393 5.400 (91.28) (101.44) (111.60) (137.16) 1.684 1.884) 2.084 2.500 (42.79) (47.87) (52.95) (63.50) P = Plug (mates with receptacle type NEBY) 1.181 (30.00) .500(12.7) Notes: SEQUENCE OF MODULES 1) See ordering information, pg. N16 for complete connectors 2) Dimensions in inches (mm) Notes: SEQUENCE OF MODULES 1) See ordering information, pg. 4/30 N16 for complete connectors 2) Dimensions in inches (mm) Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 27 Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 28 N SERIES MINI MODULE FRAME H 775 contacts FRAME H up to 350 H H H H H H H .154 (3.90) .413 (10.50) Float mounting with heavy duty guides Max. radial play .049 (1.25) 4 Single row, rack and panel with keying Plug Built-in pin protection 36 possible keying combinations .728 (18.50) Standard sizes: 7, 11, 15, 19, 23, 27, 31 & 35 unit lengths .791 Up to 350 contacts on .100 (2.54) x .100 (2.54) centers (20.10) File no. E102195 O O M2.5 1.185 .476 (30.10) (12.10) AE .157 (4.00) .315 (8.00) X File no. LR83002--4 1.402 1.244 (35.60) (31.50) .602 (15.30) AE .165 (4.20) Receptacle ORDERING INFORMATION SEQUENCE OF MODULES 1.402 1.244 (35.60) (31.50) N E H 7 X .181 (4.60) Frame Size: 7, 11, 15, 19, 23, 27, 31 & 35 units P = Plug, E = Receptacle Notes: Notes: 1) See mounting dimensions, pg pg.4/29. N15 1) 2) 2) 3) 3) See ordering mounting dimensions, N15 for information, pg. N16 forcomplete completeconnectors connectors pgpg. 4/30 See orderingininformation, pg. N16 for complete connectors Dimensions inches (mm). Dimensions in inches (mm). H H Hooded with cable clamp Jackscrew extractor Jackscrew uses 3 units Single row, rack and panel with keying Built-in pin protection 36 possible keying combinations Standard sizes: 11, 15, 19, 23, 27, 31 & 35 unit lengths Adjustable cable clamp will hold 80 to 320 conductors of 22 to 28 AWG. Adjusts .452 to 1.260 in (11.5 to 32.0 min) NPJV mates with receptacle type NEBV or NEPJV Up to 320 contacts on .100 (2.54) x .100 (2.54) centers 11 15 19 23 27 31 35 Y 1.993 2.393 2.794 3.194 3.594 4.000 4.393 (50.64) (60.80) (70.96) (81.12) (91.28) (101.44) (111.60) Z .884 1.084 1.284 1.484 1.684 1.884) 2.084 (22.47) (27.55) (32.63) (37.71) (42.79) (47.87) (52.95) O File no. LR83002--4 AE .787 (20.00) 3.433 (87.20) Plug Units .563 (14.3) M2.5 FRAME JVplug plugwith withup uptoto775 320contacts contacts FRAME JV H H H H H H H H .685 (17.40) .154 (3.90) .315 (8.00) .697 (17.70) 3.988 (101.30) 2.398 (60.90) .709 (18.00) 2.657 (67.50) M 4.00 Y .551 (14.00) SEQUENCE OF MODULES Z P = Plug (mates with receptacle type NEBV or NEPJV ) ORDERING INFORMATION N P JV 11 4 / 28 Frame Size: 11, 15, 19, 23, 27, 31 & 35 units (Allow 3 units for jackscrew) P = Plug (mates with receptacle type NEBV or NEPJV) 1.181 (30.00) Notes: Notes: 1) See ordering information, (see pg 4/30) 1) See ordering information , pg. N16 for complete connectors 2) Dimensions in inches (mm) Dimensions inches (mm)(size) 3) 2) mating face cover:inYHD0369-XX 3) Mating face cover: YHD0364--XX (size) Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 29 N SERIES MINI MODULE MOUNTING DIMENSIONS For Single Row Frame FRAMES: B, BV, BY, JV & JY AE.106 (2.70) 4 Holes .020 (0.5) Max. Radius Typ. 4 Places .094 (2.40) .094 (2.40) .800 (20.32) X 1.240 (31.50) .191 (4.85) 1.181 (30.00) .094 (2.40) Typ. MOUNTING DIMENSIONS .220 (5.59) X Frame Units FRAME H Float Mounting Plug .642 (16.30) .319 (8.10) Y .094 (2.40) .094 (2.40) .118 (3.0) Max. Radius Typ. 4 Places AE.165 (4.20) Typ. 1.28 (32.50) Receptacle .319 (8.10) 1.28 (32.50) R.177 (4.50) Typ. Y .146 (3.70) .154 (3.90) Typ. Typ. X Y 7 1.000 (25.40) 2.000 (50.80) 11 1.400 (35.56) 2.400 (60.96) 15 1.800 (45.72) 2.800 (71.12) 19 2.200 (55.88) 3.200 (81.28) 23 2.600 (66.04) 3.600 (91.44) 27 3.000 (76.20) 4.000 (101.60) 31 3.400 (86.36) 4.400 (111.76) 35 3.800 (96.52) 4.800 (121.92) 45 4.800 (121.92) 5.800 (147.32) .415 .240 (10.53) (6.10) Max. radial play = .049 (1.25) .642 (16.30) AE.165 (4.20) Typ. .118 (3.0) Max. Radius Typ. 4 Places .079 (2.00) .799 (20.30) Notes: 1) 59 oz.Din. (4.2 kgDcm) torque for mounting 2) Refer to individual frame type for standard length 3) Dimensions in inches (mm) Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 29 Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 30 N SERIES MINI MODULE The N series connectors are engineered for quick and easy use. Standard housings will be shipped completely assembled with the modules you select mounted. ORDERING INFORMATION The length of the frame is computed by multiplying the module units by the module quantity and totaling the results. N P BV 19 / 1 TMS / 1 PH / 10PMS / 1PH / 1TMS / T P = Plug E = Receptacle Frame type: B, BV, BY, G, H, JV, JY, & PJV = = = Plating: T = 10min gold (min) over Ni TH = 50min gold (min) over Ni TAH = 50min gold (min) over N on mating surface, gold flash over Ni on termination. Length of Frame in units. Add 3 units when ordering frames with jackscrews (BV & JV) Add 5 units when ordering frames with 1/2 turn (BY, JY)4 Number of Modules Module Modulecombination combinationby byquantity quantity(Refer (Refertoto catalog page N4 -- N6 for type of module module sectionstyle using theusing above outline as an and terminals etc. above outline example. The The beginning "N" and trailing "T" from as sample. beginning "N" and trailing the are dropped they are in "T" modules from the modules are because dropped because theinassembly number instead). they are the assembly number instead). Modules will be positioned in the frame according to sequenced listed. Notes: 1) 2) 3) 4) 4 / 30 When part number exceeds 24 characters, please consult factory for special (abbreviated) part number. The plug frame has a built in pin shroud (sockets may be used in plug frames, but not recommended). See receptacle for sequence of modules. Consult factory when ordering straight dip solder tails with jacking versions. Special cut out and modification --872 is required. Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com