66
02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
02 03 04 05 06 07 08
09 10 11 12
02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
02 03 04 05 06 07 08
09 10 11 12
A
Standard pole sizes
Available on demand. Minimum order quantity 5000
pieces per item.
Type 003
centerline 10 mm / 0.394 inches
P/N 310032
Type 003
centerline 5 mm / 0.197 inches
P/N 310031
Part numbers (P/N) (information: page 56)
Complete the part number by
adding the pole size.
L = (pole size - 1) x centerline + 5 mm / 0.197 inches
Type 003
Screw type terminal block, solderable, centerline 5 mm /
0.197 inches, horizontal wire entry, wire protector
Standard pole sizes
Available on demand. Minimum order quantity 5000
pieces per item.
Type 271
centerline 10 mm / 0.394 inches
P/N 312712
Type 271
centerline 5 mm / 0.197 inches
P/N 312711
Part numbers (P/N) (information: page 56)
Complete the part number by
adding the pole size.
L = (pole size - 1) x centerline + 5 mm / 0.197 inches
Type 271
Screw type terminal block, solderable, centerline 5 mm /
0.197 inches, horizontal wire entry, wire protector
Color black
2 - 24
Pole size
Solder pin length 4 mm
Recommended pc board hole
dia. Ø 1.3 mm
Solder pin dimension 1 mm
Min. insul. strip length 8 mm
Tightening torque UL 4.4 lb-in max.
IP20
Protection category according
to IEC 529
Insulating material class CTI 600
min. 3.9 mm
Clearance and creepage distances
Insulation co-ordination according to EN 60664-1
0.33 - 2.5 mm² 250 V / 4 kV / 16 A
V / A / AWG 300 / 20 / 22 - 12
Technical Data
Color black
2 - 24
Pole size
Solder pin length 4 mm
Recommended pc board hole
dia. Ø 1.3 mm
Solder pin dimension 1 mm
Min. insul. strip length 8 mm
Tightening torque UL 4.4 lb-in max.
IP20
Protection category according
to IEC 529
Insulating material class CTI 600
min. 3.3 mm
Clearance and creepage distances
Insulation co-ordination according to EN 60664-1
0.12 - 2.5 mm² 250 V / 4 kV / 15 A
V / A / AWG 300 / 15 / 26 - 14
Technical Data
Overvoltage category III III II
Pollution degree 3 2 2
Rated voltage 250 630 630
Rated test voltage 2.5 6 4
Overvoltage category III III II
Pollution degree 3 2 2
Rated voltage 250 630 630
Rated test voltage 2.5 6 4
Dimensions in mm 1 mm = 0.0394 in. Dimensions in mm 1 mm = 0.0394 in.
Note for wire range
Additional wire sizes and/or
combinations of same size
wires as follows:
Type 03
#(1) Wire range extended
to No. 30 AWG for
factory-wiring
+ Two same size wires
No. 22 - 16 AWG Cu
Sol/Str for field-wiring;
30 - 16 AWG Cu
Sol/Str factory-wiring
