1,78 Detail contact area 14,75 8,03 7,65 11,66 15,24 4,34 Mittellinie Leiterplatte B A Centerline of daughter card 4 C PIN 1 6 Offset von Fuhrungssteg zu Referenzzapfen 10 0,15 Offset from guiding bar to reference peg Datum Date code (see notes) NOTES: Material: LCP GF 30 schwarz Material: LCP GF 30 black Galvanik: min. 1,27 m Unternickelung uber gesamten PIN - Bereich min. 0,127 m Au im Steckbereich Gold - Flash im Lotbereich XXXX_XX ERNI RC X Plating: min. 1,27 m Ni entire contact min. 0,127 m Au in contact area Gold - Flash plating on contact tails 1.) Fertiglochdurchmesser finished viadiameter (PTH) 25,5 Package: Tray ( 20 pcs. ) M 1:1 daughter card layout Lochbild fur Leiterplatte (Bestuckungsseite) Board hole pattern (component mounting side) 8,15 10 1 0,71 B2 B18 B12 2,5 8,41 5,59 B1 A1 2,35 (2x) A2 1,35 9,15 14,9 6x1=6 2 0 1,49 1,91 0,05 25,5 Layout proposal is in accordance with the PCI Express spezification Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. A12 3,12 A18 4,48 2 15,24 1,57 across pads 1,4 3 12,14 10 2 1.) 0,7 0,08 6 Tolerances Information: Scale 14,7 11,18 2,54 Ma "A" Ma "B" Ma "C" Dim "A" Dim "B" Dim "C" 5:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Abgew. PCI Express STV 36pol. RT. Angle PCI Express 36 pins 100201710001 www.ERNI.com f 04.11.2011 Index Date Class PCIEXP K A2