6,3 Faston termination Flachsteckeranschluss 12,7 2,8 1,5 10 6,2 5,5 18,5 entsprechend DIN 46244/Teil 2 accoding to DIN46244/part 2 2,54 ( 0,92 ) 7,62 4 x 2.54 = 10,16 Leiterplatten Oberkante 12 Schichtaufbau im metallisierten Loch siehe Zeichnung 114124 diameter of drilled hole see drawing 114124 8,2 1) o 1,0 + 0,09 - 0,06 Durchmesser o 1,0 + 0,09 - 0,06 Diameter des metallisierten Loches of finished plated-through hole o 1,15 0,025 Bohrungsdurchmesser des Loches o 1,15 0,025 Diameter of drilled hole Leiterplattenbohrbild PCB drillhole pattern 0,7 4 x 2.54 = 0,7 10,16 1,4 2,54 134989 Dieser Bereich mu gleiches M3 Potential auf LP-Oberflache haben 7,62 ohne Mutter without nut 134990 This area must have same electrical potential on surface of PCB M4 6-32UNC 8-32UNC 1) o0.05 ( alle Locher/ Information: all) holes Tolerances Ident-Nr. Gewinde Part No. thread 5:1 Scale Consider protection memo from DIN 34 All Dimensions in mm All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. d Index 13.02.2006 Date Subject to modification without prior notice. Drawing will not be updated. Designation SVA 10-polig-Flachstecker Power bug 10-pin-Faston Elektroapparate GmbH D-73099 ADELBERG V:00055843.SZA 134988 EPSVA I