Slotted Optical Switch OPB830 and OPB840 Series (L & W) Features: * * * * * * * 0.125" (3.175 mm) wide slot Choice of electrical output parameters Choice of aperture Choice of opaque or IR transmissive shell material Side mount configuration Choice of lead spacing (L Series) 24" (609.600 mm) 26 AWG wire leads (W Series) L Package Product Photo Here W Package Description: OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers 24" (610mm) 26AWG wire leads. Building from a standard housing that utilizes a .375" (9.5 mm) wide slot, a user can specify the electrical output parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for the L Series) or 24" (610 mm) UL approved 26 AWG wire leads (W Series). Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly's sensitivity to visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device throat) are made of either IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plastic with aperture openings (for maximum protection against ambient light). Switching of the phototransistor occurs whenever an opaque object passes through the slot and interrupts the beam. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for Applications: * * * * * Non-contact interruptive object sensing Assembly line automation Machine automation Equipment security Machine safety RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08 Page 1 of 8 Slotted Optical Switch OPB830 and OPB840 Series (L & W) OPB830L Series 1 2 3 4 Pin # / Color Description 1 / Black Cathode 2 / Red Anode 3 / White Collector 4 / Green Emitter OPB830W Series DIMENSIONS ARE IN: [ MILLIMETERS] INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 09/08 Page 2 of 8 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Slotted Optical Switch OPB830 and OPB840 Series (L & W) Part Number Guide -- OPB8XX OPB 8 X X L X X Optek Assembly Sensor Aperture: 1 -- 0.010" (0.25 mm) 5 -- 0.050" (1.27 mm) Phototransistor Output Family Emitter Aperture: 1 -- 0.010" (0.25 mm) 5 -- 0.050" (1.27 mm) Discrete Shell Material: 3 -- Side mount IR transmissive Plastic discrete shell 4 -- Side mount opaque Plastic discrete shell Mounting configurations: L -- Solder lead termination Electrical Specification Variations: 0 = Electrical Parameter A - (0.320" lead spacing) 1 = Electrical Parameter B - (0.320" lead spacing) 2 = Electrical Parameter C - (0.320" lead spacing) 5 = Electrical Parameter A - (0.220" lead spacing) 6 = Electrical Parameter B - (0.220" lead spacing) 7 = Electrical Parameter C - (0.220" lead spacing) Notes: * Assemblies with dual 0.010" apertures are currently available with electrical parameter "A" only. Part Number Guide -- OPB8XX OPB 8 X X W X X Z Optek Assembly Sensor Aperture: 1 -- 0.010" (0.25 mm) 5 -- 0.050" (1.27 mm) Phototransistor Output Family Emitter Aperture: 1 -- 0.010" (0.25 mm) 5 -- 0.050" (1.27 mm) Discrete Shell Material: 3 -- Side mount IR transmissive Plastic discrete shell 4 -- Side mount opaque Plastic discrete shell Mounting configurations: W -- Wire termination * Parts ending with "Z" meet RoHS requirements * Wires = 26 AWG--24" Long Electrical Specification Variations: 0 = Electrical Parameter A 1 = Electrical Parameter B 2 = Electrical Parameter C Notes: * Assemblies with dual 0.010" apertures are currently available with electrical parameter "A" only. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08 Page 3 of 8 Slotted Optical Switch OPB830 and OPB840 Series (L & W) Absolute Maximum Ratings (TA=25C unless otherwise noted) Storage and Operating Temperature L Series(1) W Series(1) -40 C to +85C -40 C to +80C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2) 260C Input Diode Forward DC Current 50 mA Peak Forward Current (1 s pulse width, 300 pps) 3A Reverse DC Voltage 2V Power Dissipation (1) 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5V Collector DC Current Power Dissipation 30 mA (1) 100 mW Electrical Characteristics (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode LED (See OP240 for additional information--for reference only) VF Forward Voltage - - 1.7 V IF = 20 mA IR Reverse Current - - 100 A VR = 2 V Output Transistor (See OP550 for additional information--for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 1 mA V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 A Collector-Emitter Dark Current - - 100 nA VCE = 10 V ICEO Notes: (1) Derate linearly 1.67 mW/ C above 25 C for L Series. (2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones. (4) The W Series includes wire terminations of 24" (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal. Each device incorporates a wire strain relief at the housing surface. The insulation functions and colors are: anode (red), cathode (black), phototransistor collector (white) and phototransistor emitter (green). (5) All parameters tested using pulse technique. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 09/08 Page 4 of 8 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Slotted Optical Switch OPB830 and OPB840 Series (L & W) Electrical Characteristics (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS - - 0.4 V IC = 400 A, IF = 20 mA Parameter B (OPB831L,OPB841L) (OPB836L,OPB846L) (OPB831W,OPB841W) (OPB836W,OPB846W) - - 0.4 V IC = 800 A, IF = 10 mA Parameter C (OPB832L,OPB842L) (OPB837L,OPB847L) (OPB832L,OPB842L) (OPB837L,OPB847L) - - 0.6 V IC = 1800 A, IF = 20 mA - - Combined Collector-Emitter Saturation Voltage Parameter A (OPB830L,OPB840L) (OPB835L, OPB845L) (OPB830W,OPB840W) (OPB835W, OPB845W) VCE(SAT) On-State Collector Current Parameter A (OPB830L,OPB840L) (OPB835L, OPB845L) 0.625 (OPB830W,OPB840W) (OPB835W, OPB845W) IC(ON) Parameter B (OPB831L,OPB841L) (OPB836L,OPB846L) (OPB831W,OPB841W) (OPB836W,OPB846W) 1.250 - - Parameter C (OPB832L,OPB842L) (OPB837L,OPB847L) (OPB832L,OPB842L) (OPB837L,OPB847L) 2.250 - - mA VCE = 10 V, IF = 20 mA mA VCE = 5 V, IF = 10 mA mA VCE = .6 V, IF = 20 mA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08 Page 5 of 8 Slotted Optical Switch OPB830 and OPB840 Series (L & W) OPB370T11 OPB8_ _ L11 -- Flag Flag Next NexttotoEmitter Emitter OPB370T11 Flag Next OPB8_ _ L11 -- Flag Nextto toSensor Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 Typical IC(ON) Response (mA) Typical IC(ON) Response (mA) 1.00 0.80 0.80 Left to Right Right to Left Right to Left Left to Right 0.60 0.60 0.40 0.40 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB370T11 Middle of Slot OPB8_ _ L11- -Flag Flaginin Middle of Slot 1.20 Top to Bottom Typical IC(ON) Response (mA) 1.00 0 Top to Bottom 0.80 Right to Left Left to Right 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0 0.20 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Diisplacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 09/08 Page 6 of 8 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Slotted Optical Switch OPB830 and OPB840 Series (L & W) OPB370N51 Middle of Slot OPB8_ _ L51 -- Flag Flagin Next to Emitter OPB370N51 Flag Next Next to OPB8_ _ L51 -- Flag toSensor Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 Typical IC(ON) Response (mA) Typical IC(ON) Response (mA) 1.00 0.80 Left to Right Right to Left 0.60 0.40 0.20 Left to Right Right to Left 0.60 0.40 0.20 0.00 0.00 0.80 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 Displacement Distance (inches) 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPB370N51 of of Slot OPB8_ _ L51--Flag FlagininMiddle Middle Slot 1.20 Top to Bottom Typical IC(ON) Response (mA) 1.00 0 Top to Bottom 0.80 Left to Right Right to Left 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0 0.20 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08 Page 7 of 8 Slotted Optical Switch OPB830 and OPB840 Series (L & W) OPB380T55 Flag Next OPB8_ _ L55 -- Flag Nextto toEmitter Emitter OPB380T55 Flag Next OPB8_ _ L55 --Flag Nextto toSensor Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 Typical IC(ON) Response (mA) Typical IC(ON) Response (mA) 1.00 0.80 Right to Left Left to Right 0.60 0.40 0.20 0.80 Right to Left Left to Right 0.60 0.40 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 Displacement Distance (inches) 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPB380T55 of of Slot OPB8_ _ L55--Flag FlagininMiddle Middle Slot 1.20 Top to Bottom 1.00 Typical IC(ON) Response (mA) 0 Top to Bottom 0.80 Right to Left Left to Right 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0 0.20 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 09/08 Page 8 of 8 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com