OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08
Page 1 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Features:
• 0.125” (3.175 mm) wide slot
• Choice of electrical output parameters
• Choice of aperture
• Choice of opaque or IR transmissive shell material
• Side mount configuration
• Choice of lead spacing (L Series)
• 24” (609.600 mm) 26 AWG wire leads (W Series)
Description:
OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard
product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers
24” (610mm) 26AWG wire leads.
Building from a standard housin g that utilizes a .375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for
the L Series) or 24” (610 mm) UL approved 26 AWG wire leads (W Series).
Housings are made from an opaq ue grade of injection-molded plastic that minimizes the assembly’s sensitivity to
visible and near-infrared ambient radiation. Discrete shells (exposed on the pa rallel faces inside the device throat)
are made of either IR transmissive plastic (for ap plications where aperture contamination may occur) or of opaque
plastic with aperture openings (for maximum protection against a mbient light).
Switching of the phototransistor occurs wheneve r an opaque object passes through the slot and interrupts th e
beam.
Custom electrical, wire an d cabling and connectors a re available. Contact your local rep re sentative or OPTEK for
Product Photo Here
L Package
W Package
RoHS
Applications:
• Non-contact interruptive object sensing
• Assembly line automation
• Machine automation
• Equipment security
• Machine safety
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 09/08
Page 2 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
DIMENSIONS ARE IN: INCHES
[ MILLIMETERS]
Pin # / Color Description
1 / Black Cathode
2 / Red Anode
3 / White Collector
4 / Green Emitter
1
2
3
4
OPB830L Series
OPB830W Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08
Page 3 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Part Number Guide — OPB8XX
OPB 8 X X L X X
Optek Assembly Sensor Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Phototransistor Output Family Emitter Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Discrete Shell Material: Mounting configurations:
3 — Side mount IR transmissive L — Solder lead termination
Plastic discrete shell
4 — Side mount opaque
Plastic discrete shell
Electrical Specification Variations:
0 = Electrical Parameter A - (0.320” lead spacing)
1 = Electrical Parameter B - (0.320” lead spacing)
2 = Electrical Parameter C - (0.320” lead spacing)
5 = Electrical Parameter A - (0.220” lead spacing)
6 = Electrical Parameter B - (0.220” lead spacing)
7 = Electrical Parameter C - (0.220” lead spacing)
Notes:
• Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
Part Number Guide — OPB8XX
OPB 8 X X W X X Z
Optek Assembly Sensor Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Phototransistor Output Family Emitter Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Discrete Shell Material: Mounting configurations:
3 — Side mount IR transmissive W — Wire termination
Plastic discrete shell • Parts ending with “Z” meet
4 — Side mount opaque RoHS requirements
Plastic discrete shell • Wires = 26 AWG—24” Long
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Notes:
• Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 09/08
Page 4 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Diode LED (See OP240 for additional information—for reference only)
VF Forward Voltage - - 1.7 V IF = 20 mA
IR Reverse Current - - 100 µA VR = 2 V
Output Transistor (See OP550 for additional information—for reference only)
V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 1 mA
V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA
ICEO Collector-Emitter Dark Current - - 100 nA VCE = 10 V
Notes:
(1) Derate linearly 1.67 mW/° C above 25° C for L Series.
(2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
ketones.
(4) The W Series includes wire terminations of 24” (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal. Each device
incorporates a wire strain relief at the housing surface. The insulation functions and colors are: anode (red), cathode (black),
phototransistor collector (white) and phototransistor emitter (green).
(5) All parameters tested using pulse technique.
Absolute Maximum Ratings (TA=25°C unless otherwi se noted)
Storage and Operati ng Temperature
L Series(1)
W Series(1)
-40° C to +85°C
-40° C to +80°C
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2) 260°C
Input Diode
Forward DC Current 50 mA
Reverse DC Voltage 2 V
Power Dissipation(1) 100 mW
Output Phototransistor
Collector-Emitter Voltage 30 V
Emitter-Collector Voltage 5 V
Power Dissipation(1) 100 mW
Peak Forward Current (1 µs pulse width, 300 pps) 3 A
Collector DC Current 30 mA
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08
Page 5 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Electrical Characteristics (TA = 25°C unless othe rwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Combined
VCE(SAT)
Collector-Emitter Saturation Voltage
Parameter A (OPB830L,OPB840L)
(OPB835L, OPB845L)
(OPB830W,OPB840W)
(OPB835W, OPB845W)
-
-
0.4
V
IC = 400 µA, IF = 20 mA
Parameter B (OPB831L,OPB841L)
(OPB836L,OPB846L)
(OPB831W,OPB841W)
(OPB836W,OPB846W)
- - 0.4 V IC = 800 µA, IF = 10 mA
Parameter C (OPB832L,OPB842L)
(OPB837L,OPB847L)
(OPB832L,OPB842L)
(OPB837L,OPB847L)
- - 0.6 V IC = 1800 µA, IF = 20 mA
On-State Collector Current
Parameter A (OPB830L,OPB840L)
(OPB835L, OPB845L)
(OPB830W,OPB840W)
(OPB835W, OPB845W)
0.625 - -
mA
VCE = 10 V, IF = 20 mA
Parameter B (OPB831L,OPB841L)
(OPB836L,OPB846L)
(OPB831W,OPB841W)
(OPB836W,OPB846W)
1.250 - - mA VCE = 5 V, IF = 10 mA
Parameter C (OPB832L,OPB842L)
(OPB837L,OPB847L)
(OPB832L,OPB842L)
(OPB837L,OPB847L)
2.250 - - mA
VCE = .6 V, IF = 20 mA
IC(ON)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 09/08
Page 6 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPB370T11 - Flag in Middle of Slot
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Diisplacement Distance (inches)
Typical I
C(ON)
Response (mA)
Left to Righ
t
Right to Left
To
p
to Bottom
OPB370T11 - Flag Next to Emitter
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displacement Distance (inches)
Typical I
C(ON)
Response (mA)
Left to Righ
t
Right to Left
To
p
to Bottom
OPB370T11 - Flag Next to Sensor
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displacement Distance (inches)
Typical I
C(ON)
Response (mA)
Left to Ri
g
h
t
Right to Left
To
p
to Bottom
Emitter
Sensor
Left to Right Right to Left
0Width
Top to Bottom
0
OPB8_ _ L11 - Flag Next to Emitter OPB8_ _ L11 - Flag Next to Sensor
OPB8_ _ L11 - Flag in Middle of Slot
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 09/08
Page 7 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPB370N51 - Flag in Middle of Slot
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displac em e nt Distance (inch es)
Typical I
C(ON)
Response (mA)
Left to Righ
t
Right to Left
To
p
to Bottom
OPB370N51 - Flag Next to Sensor
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displace m e nt Distance (inch es)
Typical I
C(ON)
Response (mA)
Left to Ri
g
h
t
Right to Left
To
p
to Bottom
OPB370N51 - Flag in Middle of Slot
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displac em e nt Distance (inch es)
Typical I
C(ON)
Response (mA)
Left to Righ
t
Right to Left
To
p
to Bottom
Emitter
Sensor
Left to Right Right to Left
0Width
Top to Bottom
0
OPB8_ _ L51 - Flag Next to Emitter OPB8_ _ L51 - Flag Next to Sensor
OPB8_ _ L51 - Flag in Middle of Slot
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 09/08
Page 8 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPB380T55 - Flag Next to Emitter
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displacement Distance (inches)
Typical IC(ON) Response (mA)
Left to Righ
t
Right to Left
To
p
to Bottom
OPB380T55 - Flag Next to Sensor
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displacement Distance (inches)
Typical IC(ON) Response (mA)
Left to Righ
t
Right to Left
To
p
to Bottom
OPB380T55 - Flag in Middle of Slot
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00 0.05 0.10 0.15 0.20 0.25
Displacement Distance (inches)
Typical I
C(ON)
Response (mA)
Left to Righ
t
Right to Left
To
p
to Bottom
Emitter
Sensor
Left to Right Right to Left
0Width
Top to Bottom
0
OPB8_ _ L55 - Flag Next to Emitter OPB8_ _ L55 - Flag Next to Sensor
OPB8_ _ L55 - Flag in Middle of Slot
