SEK IEC 60 603-13 6--64 & Tape aging ack eel p Number of contacts R SMC low-profile male header, angled solder pins No. of contacts Identification SMC male header with angled solder pins 2.9 mm Beige Carton SEK Length: Colour: Packaging: Colour: Beige Packaging:Tape & Reel Vacuum plate for pick & place process Colour: Black Packaging:Tape & Reel Vacuum plate for pick & place process Part number No. of contacts 6 09 19 506 323 6 10 09 19 510 323 10 14 09 19 514 323 14 16 09 19 516 323 16 20 09 19 520 323 20 26 09 19 526 323 26 30 09 19 530 323 30 34 09 19 534 323 34 40 09 19 540 323 40 50 09 19 550 323 50 60 09 19 560 323 60 64 09 19 564 323 64 6 10 14 16 20 26 30 34 40 09 19 506 09 19 510 09 19 514 09 19 516 09 19 520 09 19 526 09 19 530 09 19 534 09 19 540 323 740 323 740 323 740 323 740 323 740 323 740 323 740 323 740 323 740 6 10 14 16 20 26 30 34 40 09 19 506 09 19 510 09 19 514 09 19 516 09 19 520 09 19 526 09 19 530 09 19 534 09 19 540 323 741 323 741 323 741 323 741 323 741 323 741 323 741 323 741 323 741 For performance level 3 please specify digit For performance level 2 please specify digit S4 = 0.76 m (30 inch) Au or PdNi eqivalent Identification Dimensions in mm A B 15.2 20.3 25.4 27.9 33.0 40.6 45.72 50.8 58.4 71.3 84.0 89.1 12.78 17.86 22.94 25.48 30.56 38.18 43.26 48.34 55.96 68.66 81.36 86.44 E 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 x 2= x 4= x 6= x 7= x 9= x 12 = x 14 = x 16 = x 19 = x 24 = x 29 = x 31 = 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 Part number Marking No. 1 contact No. 2 contact No. 1 contact No. 2 contact No. 1 contact Drawing Dimensions in mm Strain relief clamp in conjunction with low-profile male header 09 18 000 99054) Female connector Low-profile male header * Not normally kept in stock 1) 2) Solder pins for 1 0.1 mm dia. hole 7 6 5 * Locking lever for female connector with strain relief 08 46 Drawing o polarization slot for 6, 10 or 14 way male header N No polarization slot for 6 way male header 3) 4) When the security of latching is required and space is a premium, these locking levers can be fitted onto the strain relief of the HARTING female connector. itch tolerance: 0.1 P Order 2 per female connector