36
Catalog 82068 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 1-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Shielded AMPLIMITE .050 Series Contact Arrangements, Performance
Specifications, Technical Documents—Slimline Connectors
AMPLIMITE Subminiature D Connectors
Note: All part numbers are RoHS compliant.
AMPLIMITE .050 Series
Connectors, Series III
Contact Arrangements
Performance Specifications
Technical Documents
Position 1
A
BC
Note: Mating face of receptacle is shown, plug is mirror image.
No. of Position No.
Pos. ABC
26 13 14 26
Mating Cycles (Durability): 500 max.
Current Rating (30°C T-Rise): 1A max., 50% loading
Termination Resistance (Mated): 25 milliohms max.
Insulation Resistance: 1000 megohms min.
Dielectric Withstanding Voltage: 500 VAC
Header Processing Temperature: +220°C max. for 3 minutes
Temperature Range: –55°C to +105°C
Product Specifications describe technical performance
characteristics and verification tests. They are intended for
the Design, Component and Quality Engineer.
108-1366 Shielded AMPLIMITE .050 Series,
Slimline Connectors
Application Specifications describe requirements for using
the product in its intended application and/or termination infor-
mation. They are intended for the Packaging and
Design Engineer and the Setup person.
114-40036 Shielded AMPLIMITE .050 Series,
Slimline Connectors
Instruction Sheets provide instructions for assembling or
applying product. They are intended for Manufacturing
Assembler or Operator.
408-9663 Mass Insertion Tooling–Part No. 91291-■■
408-6923 AMP Manual Arbor Frame–Part No. 58024-1
408-9701 Wire Termination Tooling Kit for CHAMPOMATOR 2.5
Machine–Part No. 1-762661-4
408-7777 AMP Manual Arbor Frame w/Slide–Part No. 91085-2
408-9746 Crimper Assembly–Part No. 856684-1
408-9200 Single Wire Insertion Tool–Part No. 58430-1
408-9721 Die Holder Assembly for Pneumatic Crimper–
Part No. 58449-■■
408-9788 Die Assembly–Part No. 90437-1
408-9898 Backshell and Cover Tooling Assemblies–
Part No. 543521-1 and 543522-1
Customer Manuals provide information on Tyco Electronics
termination equipment. They are intended for Manufacturing
Assemblers or Operators.
409-5786 CHAMPOMATOR 2.5 Machine
409-5791 CHAMPOMATOR 2.5 Control Module–
Part No. 852423-■■
409-5822 Pneumatic Crimper–Part No. 312522-3
409-5843 Pneumatic Power Unit