LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES * High collector-emitter voltage ( VCEO = 70V ) * High input-output isolation voltage ( Viso = 5,000Vrms ) * Response time ( tr : TYP. 5s at VCC = 10V, IC=2mA, RL = 100 ) * Current transfer ratio ( CTR : MIN. 40% at IF = 10mA, VCE = 5V ) * Dual-in-line package : CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V * Wide lead spacing package : CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V * Surface mounting package : CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V * Tape and reel packaging : (TYPE I) CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V * UL approved ( No. E113898 ) * FIMKO approved ( No. 209049 ) * NEMKO approved ( No. P99102464 ) * DEMKO approved ( No. 99-04182 ) * SEMKO approved ( No. 9943380 / 01-20 ) * VDE approved ( No. 094722 ) * CSA approved (No. 91533-1) Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 1 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES The relevant models are the models Approved by VDE according to DIN VDE 0884:1992-06 Approved Model No.: CNY17-1 / CNY17-2 / CNY17-3 / CNY17-4 ; CNY17-1M / CNY17-2M / CNY17-3M / CNY17-4M ; CNY17-1S / CNY17-2S / CNY17-3S / CNY17-4S VDE approved No.: 094722 (According to the specification DIN VDE 0884:1992-06) * Operating isolation voltage VIORM : 850V (Peak) * Transient voltage VTR : 6000V (Peak) * Pollution : 2 (According to VDE 0110-1 : 1997-04) * Clearances distance (Between input and output) : 7.0mm (MIN.) * Creepage distance (Between input and output) : 7.0mm (MIN.) * Isolation thickness between input and output : 0.4mm (MIN.) * Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled. * Indication of VDE 0884 approval prints " Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 " on sleeve package. Page : 2 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only OUTLINE DIMENSIONS Dual-in-line package : Wide lead spacing package: *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 3 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only OUTLINE DIMENSIONS Surface mounting package : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 4 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TAPING DIMENSIONS Tape and reel package ( TYPE I ): Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 0.3 ( .63 ) 4 0.1 ( .15 ) 7.5 0.1 ( .295 ) 2 0.1 ( .079 ) 12 0.1 ( .472 ) Page : 5 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING ( Ta = 25C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation P 100 mW Collector - Emitter Voltage VCEO 70 V Emitter - Collector Voltage VECO 7 V Collector - Base Voltage VCBO 70 V Collector Current IC 150 mA Collector Power Dissipation PC 150 mW Ptot 250 mW Viso 5,000 Vrms Operating Temperature Topr -55 ~ +100 C Storage Temperature Tstg -55 ~ +150 C Tsol 260 C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 6 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25C ) PARAMETER INPUT OUTPUT SYMBOL MIN. TYP. MAX. UNIT Forward Voltage VF -- 1.45 1.65 V IF=60mA Reverse Current IR -- -- 10 A VR=6V Terminal Capacitance Ct -- -- 100 pF V=0, f=1MHz Collector Dark Current ICEO -- -- 50 nA VCE=10V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 70 -- -- V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 7 -- -- V IE=10A IF=0 Collector-Base Breakdown Voltage BVCBO 70 -- -- V IC=0.1mA IF=0 40 -- 80 63 -- 125 % IF=10mA VCE=5V IF=10mA IC=2.5mA CNY17-1 Current * Transfer Ratio TRANSFER CHARACTERISTICS * CTR = CONDITIONS CNY17-2 CTR CNY17-3 100 -- 200 CNY17-4 160 -- 320 Collector-Emitter Saturation Voltage VCE(sat) -- -- 0.3 V Isolation Resistance Riso 100 -- -- G DC500V 40 ~ 60% R.H. Floating Capacitance Cf -- -- 2 pF V=0, f=1MHz Response Time (Rise) tr -- 5 10 s Response Time (Fall) tf -- 5 10 s VCC=10V, IC=2mA RL=100 IC x 100% IF Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 7 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ISOLATION SPECIFICATION ACCORDING TO VDE 0884 Parameter Symbol Conditions Rating Unit 55/100/21 - 2 - 850 VPEAK tp=60s, qc<5pC 1275 VPEAK tp=1s, qc<5pC 1594 VPEAK tINI = 10s 6000 VPEAK Class of environmental test - DIN IEC68 Pollution - DIN VDE0110 Maximum Operating Isolation Voltage Partial Discharge Test Diagram 1 Voltage (Between Input and Output) Diagram 2 Maximum Over-voltage VIORM - Vpr VINITIAL Remark Refer to the Diagram 1, 2 Safety Maximum Ratings o 1) Case Temperature Tsi IF = 0, Pc = 0 175 2) Input Current Isi Pc=0 400 mA 3) Electric Power (Output or Total Power Issipation) Psi - 700 mW Isolation Resistance (Test Voltage Between Input and Output : DC500V) RISO Ta=Tsi MIN.109 Ta=Topr(MAX.) MIN.1011 Ta=25 oC MIN.1012 C Refer to the Figure 1, 3 Precautions in performing isolation test * Partial discharge test methods shall be the ones according to the specifications of VDE 0884:1992-06 * Please don't carry out isolation test (Viso) over VINITIAL ,This product deteriorates isolation characteristics by partial discharge due to applying high voltage (ex. VINITIAL ). And there is possibility that this product occurs partial discharge in operating isolation voltage (VIORM) Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 8 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PARTIAL DISCHARGE TEST METHOD Method (A) for type testing and random testing. V VINTIAL Vpr VIORM tp tb t3 t1 tini t2 t4 t1, t2 = 1 to 10s t3, t4 = 1s tp (Partial Discharge Measuring Time)= 60s tb = 62s tini = 10s t Method (B) for routine testing. V Vpr VIORM t3 tp tb t4 t3, t4 = 0.1s tp (Partial Discharge Measuring Time)= 1s tb = 1.2s t The partial discharge level shall not exceed 5 pC during the partial discharge measuring time interval tp under the test conditions shown above. Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 9 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) Forward current IF(mA) 80 60 40 20 0 -55 -25 0 25 50 75 100 125 200 150 100 50 0 -55 -25 75 100 125 500 6 Ic= 0.5mA 1mA 2mA 3mA 5mA 5 4 o Ta= 25 C o Ta= 75 C o 50 C 200 Forward current IF (mA) Collector-emitter saturation voltage V (sat) (V) 50 Fig.4 Forward Current vs. Forward Voltage 3 2 1 25oC o 0C o -25 C 100 50 20 10 5 2 0 1 0 2.5 5.0 7.5 10.0 0 12.5 Forward current IF (mA) 1.5 2.0 45 VCE= 5V Ta= 25 C 40 o 140 Collector current Ic (mA) 160 1.0 R = 120 100 80 100k 60 2.5 3.0 Fig.6 Collector Current vs. Collector-emitter Voltage 200 180 0.5 Forward voltage VF (V) Fig.5 Current Transfer Ratio vs. Forward Current Current transfer ratio CTR (%) 25 Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current 500k 40 20 0 35 o Ta= 25 C IF = 30mA 20mA 30 Pc(MAX.) 25 20 10mA 15 10 5mA 5 2mA 0 0 2 5 10 20 50 Forward current I F(mA) Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 0 o o Ambient temperature Ta ( C) 0 2 4 6 8 10 Collector-emitter voltage VCE(V) Page : 10 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CHARACTERISTICS CURVES Relative current transfer ratio (%) 150 I F= 10mA VCE= 5V 100 50 0 -55 -25 0 25 50 Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature Collector-emitter saturation voltage V (sat) (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 -55 100 75 I F= 10mA I C= 2.5mA Ambient temperature Ta ( C) -6 50 10 10 10 -8 10 -9 75 100 I F= 10mA VCC= 5V Ta= 25 C VCE= 10V -7 o Response time ( s) Collector dark current ICEO(A) 25 Fig.10 Response Time vs. Load Resistance -10 10 -11 10 5 tr tf 2 1 -12 10 -13 10 0 -30 20 40 60 80 0.5 0.02 100 o 0.05 Fig.11 Frequency Response 0.2 Vcc IF = 10mA Vcc= 5V o Ta= 25 C Input RD RL Input Output Output 10% 90% -2 ts td tr -4 R = 200 150 tf 75 Test Circuit for Frequency Response -6 Vcc -8 -10 0.5 1 0.5 Test Circuit for Response Time 2 0 0.1 Load resistance RL (k ) Ambient temperature Ta ( C) Voltage gain Av (dB) 0 Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Ambient Temperature 10 -25 o o RD 2 5 10 20 RL Output 50 100 200 500 Frequency f (kHz) Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 11 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : CNY17-1-V thru CNY17-4-V SERIES BNS-OD-C131/A4 Page : 12 of 12