A0.50 H 2.540.10 G 2.500.10 B0.20 1.00 Specifications 2.5 5.00 2.54 (Non-Accum) F 0.64mm SQ PIN (Typ.) Material Insulator : Polymer , LCP 30% glass filled, Natural, UL94V-0 Contact : Copper Alloy Recommended PCB Layout General Tolerance: 0.05 E PLASTIC PICK AND PLACE CAP C Plating Underplating : 30"-50" Nickel all over Contact Area : See ordering grid Solder Area D0.20 C Electrical Current Rating : 3A per pin Contact Resistance : 20 m max. Insulating Resistance : 1000 M min. Dielectric Withstand Voltage : 500V AC 0.15 1.50 2.500.10 2.500.10 1.25 Mechanical & Environmental & Operating Temperature : -40C to +105C Soldering Process : IR Reflow : 260C for 10 secs Manual Solder : 350C for 3-5 secs Mates with : BG300 - Horizontal mating - Choose 5.4mm header pin length BG300 - - 5.4mm BG306 - Perpendicular mating - Choose 4.0mm header pin length Higher MOQ may apply BG306 - - 5.4mm - MOQ Ordering Grid C CONTACTS B 1.50 2 Way 6 Way D BG301 DIMENSIONS A B C 02 5.08 2.54 5.50 03 7.62 5.08 7.50 04 10.16 7.62 7.50 05 12.70 10.16 7.50 06 15.24 12.70 7.50 XX X XXXX No. of Contacts 02 to 06 L B Request Samples and Quotation Packing Options B = Tape and Reel with Cap (MOQ 1,000 pcs on 5.4mm post length) (check with GCT for MOQ on 4.0mm post length) Contact Plating A = Gold Flash All Over Dimension D - Post Length 0400 = 4.00mm (Standard when mating with BG306) 0540 = 5.40mm (Standard when mating with BG300) or Specify Custom Post Length eg 0250 = 2.50mm Part Number Product Description BG301 2.54mm Pitch Pin Header, Single Row, Surface Mount, Horizontal, without Locating Peg, Natural LCP Drawing Date A 7th December 2011 By Detail 1 2 NOTES: Standard black version BG301 is BG080 BG301BG080 Insulator Material L = LCP (Natural) (Other plating options available on request) 3 4 Revision Date 5 CC BG301 C PCN C2 30/11/16 Tolerances (Except as Noted) Length Angle X.X 0.30 X.XX 0.20 Units: Metric (mm) C 3rd Angle Projection 6 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE GC Global Connector Technology www.gct.co Not to Scale Drawn By CM 8 Sheet No. 1/2 FOR 5.40mm PIN LENGTH ONLY H Peel off direction 1.75 16.4 +2.0 -0.0 Pull out direction 1. 50 2.00 4.00 0.30 16.00 O3812.0 2 PIN G O 13 16.00 .00 0.30 16.00 6.08 8.07 4.00 6 2.00 7.50 O 50 1. 6 1.75 3.90 O13.00 PEELING RESISTANCE: 0.2~0.8N(20.4gf~81.6gf). PEELING SPEED: 300mm/minutes. 6 6 16.00 7.50 3.54 5.53 O Empty cover tape 400 mm. 3 PIN F Peeling angle: 165~180 O1 .50 1.75 3.90 2.00 4.00 20.00 0.30 5.00 E 4 PIN 2.90 1.75 3.80 11.16 6 24.00 13.15 0.30 6 4.00 16.00 11.50 2.00 D Empty carrier tape 100 mm. Product 1000 pcs 10.30 24.00 11.43 Empty carrier & cover tape 160 mm. 5 PIN See table for number of reels per carton 1.75 3.90 2.00 4.00 0.30 16.00 TRANSPARENT GLUE TAPE 6 PIN H=400 OUTSIDE 13.71 15.70 6 6 24.00 11.50 C REEL L= 39 0 3.90 B 0 39 W= VACUUM BAG A PINS UNITS/REEL REELS PER CARTON CARTON TOTAL CARRIER TAPE LENGTH 2&3 4 5&6 1000 PCS 1000 PCS 1000 PCS 16 10 10 16,000 10,000 10,000 16.5 m 20.7 m 16.5 m Part Number Product Description BG301 2.54mm Pitch Pin Header, Single Row, Surface Mount, Horizontal, without Locating Peg, Natural LCP Drawing Date 7th December 2011 By Detail Revision Date 1 2 3 4 5 CC BG301 C PCN C2 30/11/16 Tolerances (Except as Noted) Length Angle Units: Metric (mm) C 3rd Angle Projection 6 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE GC Global Connector Technology www.gct.co Not to Scale Drawn By CM 8 Sheet No. 2/2