PM3 Series PM3 Series * Available in a wide range of voltages * Press fit mounting lowers labor and assembly cost * 6" 24AWG wire leads at no additional cost * Wide variety of connectors available Mounting Information: Press-fit mounting in 0.157 [4.00 mm] hole Panel Thickness: 0.047 [1.2mm] to 0.093 [2.4mm] Material Specifications: Housing: UL Rated 94V-0, Black, 6 Nylon per ASTM D4066 PA111 Oxygen Index: +28% Optional Wire Leads: 24AWG U.L. 1061 Cathode-Black, Anode-Red Application Notes: Wire leads from 2.5" to 48" are available subject to special quotation please consult Bivar at 1-800-SPACERS for additional information. "-CC" options can be used with the PM3 Series by keystone slotting the mounting hole to allow passage of the connector. Ordering Information: PM3 G D 5V W6 -CC Series Color Lens Special Leads Options Many connectors are available as well as customer specified connectors. Subject to quotation. Color: Please see Chart Color Options and Suffixes: Suffix Color G H Y SR O A BW BC Peak (nm) Typ. Vf Green High Efficiency Red Yellow Super Red Orange Amber Blue Red/Green Bi-Color 565nm 635nm 585nm 660nm 635nm 610nm 430nm 635/565 2.0 2.0 2.0 2.0 2.0 2.0 3.5 2.0 Lens Choices: D Color Diffused C Water Clear T Tinted Non-diffused Special: L 2ma Low Current 5V 5 Volt integrated resistor 12V 12 Volt integrated resistor Leads: "Blank" Terminal Leads Wx 24AWG Wire Leads Replace the "X" with the length in inches 36 Options: -CC Standard 0.100" [2.54mm] pitch header connector -CC2 Miniature 0.075" [2.54mm] pitch header connector Printed Circuit Board Packaging Hardware Cage Code (FSCM) 32599 (c) Copyright 2001 Bivar Inc.