Data sheet
Creation date November 26, 2020 11:23:24 AM CET
Catalogue status 20.11.2020 / We reserve the right to make technical changes. 1
TS 35X7.5/LL 2M/ST/ZN Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Product image
Building installation wiring
For building installations, we offer a complete system
that revolves around the 10×3 copper rail and comprises
perfectly coordinated components: from installation
terminal blocks, neutral conductor terminal blocks and
distribution terminal blocks to comprehensive accessories
such as busbars and busbar holders.
General ordering data
Version Rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanic
zinc plated and passivated
Order No. 0514500000
Type TS 35X7.5/LL 2M/ST/ZN
GTIN (EAN) 4008190046019
Qty. 2 m
Data sheet
TS 35X7.5/LL 2M/ST/ZN Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Creation date November 26, 2020 11:23:24 AM CET
Catalogue status 20.11.2020 / We reserve the right to make technical changes. 2
Dimensions and weights
Depth 7.5 mm Depth (inches) 0.295 inch
Height 35 mm Height (inches) 1.378 inch
Net weight 312.5 g Width 35 mm
Width (inches) 1.378 inch
Material data
Material
Steel
Surface finish galvanic zinc plated and
passivated
Colour silver
System specifications
Version with slot Rail TS 35, TS 35 x 7.5
Additional technical data
Installation advice Direct mounting Type of mounting when screwed in
General
Installation advice Direct mounting Rail TS 35, TS 35 x 7.5
Standards
DIN EN 60715
Surface finish galvanic zinc plated and
passivated
Mounting rail
Drill-hole diameter 5.2 mm
Installation advice Direct mounting
Length of the terminal rail nominal 2,000 mm
min. 0 mm
max. 2,000 mm
Material Steel
Pre-punched mounting rail Yes
Short circuit strength corresponds to E-
Cu wire
16 mm²
Short-time withstand current according
to IEC 60947-7-2
1.92 kA/1s
Slit gap 11 mm
Slit gap
Slit length 25 mm
Slit length
Slit width 5.2 mm
Slit width
Slotted drill holes Yes
Solder eyelet hole diameter (D) 5.2 mm
Spacing of holes, centre-to-centre 36 mm
Standards DIN EN 60715
Surface finish galvanic zinc plated and passivated
Thickness 1 mm
Rating data
Standards DIN EN 60715
Data sheet
TS 35X7.5/LL 2M/ST/ZN Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Creation date November 26, 2020 11:23:24 AM CET
Catalogue status 20.11.2020 / We reserve the right to make technical changes. 3
Classifications
ETIM 6.0 EC001285 ETIM 7.0 EC001285
eClass 9.0 27-40-06-02 eClass 9.1 27-40-06-02
eClass 10.0 27-40-06-02 eClass 11.0 27400602
Approvals
ROHS Conform
Downloads
Brochure/Catalogue CAT 1 TERM 16/17 EN
Engineering Data STEP
Engineering Data EPLAN, WSCAD, Zuken E3.S
User Documentation StorageConditionsTerminalBlocks