SMD Precision Thin Film Network Type MRS Series Type MRS Series Characteristics Electrical The MRS series is an entirely new chip network utilising nickel Resistance Range: 10R ~ 91R 100R ~ 33K Resistance Tolerance: 0.5%, 1% 0.1%, 0.5%, 1% 36K ~ 330K 0.5%, 1% Temperature Coefficient of Resistance: 50ppm/C 25ppm/C 100ppm/C Rated Power (Suitable Heatsink): 63mW / element 63mW / element 63mW / element Selection Series: E24 E24 E24 Maximum Operating Voltage: 75V 75V 75V Power Derating Curve chrome sputtering on high purity alumina. This 100 network has been designed for high 80 Rated Power (%) volume applications and is offered with 4 isolated resistors on a single substrate (12.06 sizes) at 0.1% with convex terminals. A wide value range and alternative T.C.R's make this a 60 40 20 most versatile resistor solution. 0 Key Features Suitable for Tight Spaces High Precision Thin Film Wide Value Range Lower Placement Costs Range of Stabilities Low Cost in Volume High Reliability Design 0 20 40 60 70 80 100 120 125 Ambient Temperature (C) Dimensions Schematic Layout 8 5 1 4 How to Order MRS 100K B Common Part Resistance Value Tolerance 100 ohms (100 ohms) 100R B 0.1% MRS - Precision Thin Film Chip Network 1K ohm (1000 Ohms) 1K0 D 0.5% F 1% 100K ohm (100000 ohms) 100K Literature No. 1773252 Issued: 05-06 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. www.tycoelectronics.com passives.tycoelectronics.com