■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELEC
T
R
O
NIC
S
Part name
1
2
3
4
5
6
7
8
9
!0
Shaft
Base element
Rotor gear
Electrode
Wiper
Resistive element
Terminal pin
Material
Flammability
Housing
Rubber cushion
Adhesive
※Please refer to the LIST OF PART NUMBERS when placing order s.
RuO2cermet
Ceramic
Epoxy
Ag-Pd cermet
Multi metal alloy
Zinc alloy, Nickel-plated
Polyamide
Silicone rubber
PBT(Polybutyleneterephthalate)
INTERNAL STRUCTURE
■
FEATURES
● RoHS compliant
● Fine setting is possible
● Extremely small backlash (In house comparison)
■
PART NUMBER DESIGNATION
T M - 7 E P 5 0 k Ω( 5 0 3 )
Series name Resistance code
Resistance value
Product shape
P
：
Top adjustment S
：
Side adjustment
W
：
Top adjustment X
：
Side adjustment
UL-94V-0
—
UL-94HB
UL-94V-0
—
TM-7
3 TURNS CERMET TRIMMERS
3
5
8
!0
1
2
9
7
6
4
Terminal pin
E：Sn (Lead-free)
Copper, Tin-plated
RoHS compliant
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELEC
T
R
O
NIC
S
TM-7
CERMET TRIMMERS
Test item Test conditions Specifications
Thermal shock
Humidity
Shock
Vibration
Load life
Low temp. operation
High temp. exposure
Immersion seal
Soldering heat
Nominal resistance range
Resistance tolerance
Power ratings
Resistance law
Maximum input voltage
Maximum wiper current
Effective electrical turn
End resistance
C.R.V.
Operating temp. range
Temp. coefficient
Insulation resistance
Dielectric strength
Net weight
Mechanical turn
Operating torque
Mechanical stop
Rotational life
Thrust to shaft
Solderability
Terminal strength
1
2
3
2
13
1
2
3
2
31
Adjustment
position
Pieces in
package
Form of packaging
Plastic bag
Shape of terminal
(Top view)
※The above part numbers are all available as the standard item respectively
with the combination of <Nominal resistance values> (Fig. 1).
※Verify the above part numbers when placing orders.
■
LIST OF PART NUMBERS
Top adjustment
Side adjustment
(
↑
Adjustment
direction)
TM-7EP
TM-7EW
TM-7ES
TM-7EX
50 pcs./pack
<Nominal resistance values>
50 Ω100 Ω200 Ω500 Ω1 kΩ2 kΩ5 kΩ10 kΩ
20 kΩ50 kΩ100 kΩ200 kΩ500 kΩ1 MΩ2 MΩ
Δ
R/R：Change in total resistance
S.S. ：Setting stability
■
ELECTRICAL CHARACTERISTICS
■
MECHANICAL CHARACTERISTICS
50 Ω~ 2 MΩ
±10 %
0.5 W (70 °C) 0 W (120 °C)
Linear law
DC300 V or power rating, whichever is smaller
100 mA or power rating, whichever is smaller
2.5 turns
1 % or 2 Ω, whichever is greater
1 % or 3 Ω, whichever is greater
−55 ~ 120 °C
±100 10-6/°C maximum
1000 MΩminimum (DC500 V)
AC900 V, 60 s
Approx. 0.50 g (TM-7EP, EW)
Approx. 0.69 g (TM-7ES, EX)
3 turns
20 mN·m {204 gf·cm} maximum
Clutch action
200 cycles
Δ
R/R ≦±(2 Ω+3 %)
10 N {1.02 kgf} minimum
245 ±3 °C, 2 ~ 3 s
10 N {1.02 kgf} minimum
（
Tensile strength
）
■
ENVIRONMENTAL CHARACTERISTICS
−65 ~ 125 °C (0.5 h), 5 cycles [
Δ
R/R ≦1 %]
[S.S. ≦1 %]
−10 ~ 65 °C (80 ~ 98 %),
10 cycles, 240 h
[
Δ
R/R ≦2 %]
981 m/s2, 6 ms
6 directions for 3 times each [
Δ
R/R ≦1 %]
[S.S. ≦1 %]
Amplitude 1.52 mm or
Acceleration 196 m/s2,
10 ~ 2000 Hz, 3 directions, 12 times each
70 °C, 0.5 W, 1000 h [
Δ
R/R ≦3 %]
[S.S. ≦1 %]
−55 °C, 2 h [
Δ
R/R ≦2 %]
[S.S. ≦2 %]
120 °C, 250 h [
Δ
R/R ≦3 %]
[S.S. ≦2 %]
85 °C, 60 s
No leaks (No continuous bubbles)
[
Δ
R/R ≦1 %]
Fig. 1
{ }
：
Reference only
Flow soldering
260 ± 3 °C, 5 ~ 6 s, two times maximum
Manual soldering
380 ± 10 °C, 3 ~ 4 s
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELEC
T
R
O
NIC
S
TM-7
CERMET TRIMMERS
Nominal resistance values (Ω)Resistance code Maximum input voltage (V) Maximum wiper current (mA)
■
MAXIMUM INPUT RATINGS
50 500 5.00 100
100 101 7.07 70.7
200 201 10.0 50.0
500 501 15.8 31.6
1 k 102 22.4 22.4
2 k 202 31.6 15.8
5 k 502 50.0 10.0
10 k 103 70.7 7.07
20 k 203 100 5.00
50 k 503 158 3.16
100 k 104 224 2.24
200 k 204 300 1.50
500 k 504 300 0.60
1 M 105 300 0.30
2 M 205 300 0.15
● TM-7EP
Top adjustment
● TM-7EW
Top adjustment
● TM-7ES
Side adjustment
Resistance code & Production date code
Lead-free Identification mark
3 – 0.45
φ
31
2
6.9
2.5, Slot 0.6 W × 0.7 D
φ
1.5
7±2
0.3
7.2+0.4
–0.1
φ
2.5
2.5 2.5
★Pin pitch in W type is
different from P type.
3 – 0.45
φ
3
1
2
6.9 7±2
0.3
7.2+0.4
–0.1
φ
1.8 1.8
1.30.6
Resistance code & Production date code
1.5
2.5, Slot 0.6 W × 0.7 D
φ
Lead-free Identification mark
Resistance code & Production date code
6.2
8.4
6.5±2
3 – 0.45
φ
2.50.8 0.3
2.52.5
3
1
2
8.2 +0.4
–0.1
7.2 +0.4
–0.1
2.5, Slot 0.6 W × 0.7 D
φ
Lead-free Identification mark
CW rotation
1
2
3
■
OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ±0.3 (Unit: mm)
■
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELEC
T
R
O
NIC
S
● TM-7EX
Side adjustment
<Bulk pack specifications>
● Unit of bulk in a plastic bag is 50 pcs. per pack.
● Boxing of bulk in a plastic bag is performed with 200 pcs. per box.
■
PACKAGING SPECIFICATIONS
★Pin position & shaft position of X type are different from S type.
Resistance code & Production date code
3.2
8.4
9±2
3 – 0.45
φ
2.50.8 0.3
2.52.5
1
2
3
8.2+0.4
–0.1
7.2+0.4
–0.1
2.5, Slot 0.6 W × 0.7 D
φ
Lead-free Identification mark
CW rotation
1
2
3
■
OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ±0.3 (Unit: mm)
TM-7
CERMET TRIMMERS
