PQ-28 Analog Diode Phase Shifters Features * Octave bands up to 18GHz * Fast Phase responce as low as 10nS * RF power operation 10mW peak/CW, RF power survival 100mW peak/CW * Bias connection using pin or connector options * Custom configurations available Specifications: Parameter Specification Frequency Range (min) Units 0.5 - 1.0 GHz 360 Degrees 5 dB Amplitude Ripple (Max) 1.25 dB VSWR (Max) 2.0:1 Ratio Phase Shift Insertion Loss (Max) Outline A' B' C' D' E' F' G' 4 7.75 2.50 N/A 2.30 7.25 0.25 4PLCS Screening: Additional Electrical Specifications: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65 C to +100 C, 10 cycles DC Supply: Control: Logic Levels: Attenuation Accuracy: Attenuation Stability over Temperature: Hermetically-sealed switches are fine and gross leak checked per MIL-STD-883, Method 1014. Optional High-Rel screening available upon request. Contact the factory to discuss your screening requirements. Environmental Specifications: +5V 0.5V @ +275mA -5V 0.5V @ -50mA 8 Bits command 1 Strobe line Positive edge latched TTL/HMOS +/-0.15 dB or +/-1.5% whichever is greater +/-0.025 dB/C Designed to meet: MIL-E-5400, MIL-STD-202, MIL-E-16400 Mechanical Specifications: Operating Temp: -55C to +125C Case Style: PQ Outline Storage Temp: -65C to +150C Connectors: SMA Female per MIL-C-39012 Humidity: MIL-STD-202F, M103, Cond B Connector Control: Micro-D 21 Pin Shock: MIL-STD-202F, M213, Cond B Bias & Control Pins: o0.02" x 0.15" long Altitude: MIL-STD-202F, M105, Cond B Mounting: Vibration: MIL-STD-202F, M204, Cond B o0.10" through holes (4) places Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D 40 Industrial Way East, Eatontown , NJ 07724 [USA] Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/acc, email: acc-sales@aeroflex.com Revision Date: 2/23/2011 Outline Drawing: A' E' H' SURFACE .25 .40 BIAS PIN BIAS GND GROUND D' RF B' RF F' .10 .125 DIA THRU G' MTG HOLES .38 2 PLS C' OUTLINE CASE STYLE PQ Notes: Custom Options - Contact the Factory 1. Monotonicity is Guaranteed. 2. The Phase shift varies with frequency at any voltage setting. This variation, referenced to 0 at logic 0 for each frequency, is approximately 15% for octave models, 10% for models with 25% bandwidth, and 7.5% for models with 10% bandwidth. Phase flatness of the QQ-65 & QQ-74 is 25%. 3. A Connector, (SMA Female) is available in place of the bias pin at no extra charge. This will be placed at the center of the surface marked "H" on the drawing. This is the .38 x "A" surface. If a SMA Female is desired, add the suffix "C" to the model number (e.g., PQ-45C) 4. Linearization models available, call for outline and details. * * * * * * * * * Gray epoxy paint per MIL-C-22750 Video transient suppression GPO connectors ECL logic input Phase and amplitude tracking Other frequency ranges available from 1MHz to 26GHz Reversed logic Available without SMA connectors for drop-in applications High rel screening ISO 9001:2008 certified Aeroflex Control Components Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 Sales Phone: (732) 460-0212 ACC-sales@aeroflex.com www.aeroflex.com/Microwave www.aeroflex.com/ACC Aeroflex Control Componen. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex Control Components. All rights reserved. Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.