0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding FX12 Series Dual Shields (when mated) [Patented Design] =ZVYZg"h^YZh]^ZaY BZiVa[^ii^c\h Fig.1 Features Effective Shielding 1. Dual shields Built-in shield plates and metal fittings in the plugs and receptacles prevent electromagnetic emission and external interference on the entire 360 periphery of mated connectors. (Fig.1, 2) 2. Low-Profile A board-to-board distance of 1.5mm combined with reduced mounting areas allow for use in space-limited applications. (Fig.3) Emitted Noise Level (dBm) Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. GZXZeiVXaZ"h^YZh]^ZaY 3. Self alignment Built-in self-alignment feature in the plug and receptacle allows mating / un-mating in limited spaces. (Fig.4) 4. Consistent mated retention force Without shield plates With shield plates Frequency (GHz) Fig.2 Low-Profile, Space-Saving with Reduced Connector Footprint (Shown 24-Position - fully mated) Indents in the shield plates and contact configuration assure consistent, mated retention forces regardless of the number of contacts. A positive, tactile "click" confirms the fully mated state. 5. Solder wicking prevention Nickel plating barrier on the contacts prevents solder compound intrusion (wicking) into the contact engagement areas. 6. High contact reliability The narrow female contacts have a curved shape that acts like a spring, producing a long wipe length during mating and results in high contact reliability. 7. Pick-and-Place automatic mounting friendly The compact, double shielded structure still provides enough area for vacuum pick-up machines when used in automated mounting methods. Receptacle: 0.8mm Header: 0.8mm Fig.3 Self Alignment of 0.3 mm Receptacle 8. RoHS Compliant All materials and substances used to produce this product comply with RoHS standards. Plug Fig.4 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 2015.8e 1 FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding Product Specifications Current rating 0.3A Voltage rating 30V AC Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. Rating Storage temperature range -10c to +60c (Note 2) Storage humidity range Relative humidity 95% max. (No condensation) Operating temperature range -55c to +85c (Note 1) Item Specification 1.Insulation resistance 50Mo min. 2.Withstanding voltage No flashover or insulation breakdown. 3.Contact resistance 100mo max. No electrical discontinuity of 1s or more. 4.Vibration resistance No damage, cracks or parts dislocation. Conditions 100V DC 100V AC/one minute 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 3 axis, 10 cycles 5.Shock resistance No electrical discontinuity of 1s or more. No damage, cracks or parts dislocation. Acceleration of 490m/s2, 11ms duration, sine half-wave waveform, 3 cycles / each of 3 axis directions 6.Humidity resistance Contact resistance: 120mo max. Insulation resistance: 25Mo min. No damage, cracks or parts dislocation. 96 hours at 40c, 90% to 95% R.H. 7.Temperature cycle Contact resistance: 120mo max. Insulation resistance: 50Mo min. No damage, cracks or parts dislocation. Temperature: -55c +15c to 35c +85c +15c to +35c Time: 30 2 to 3 30 2 to 3 (Minutes) 5 cycles Contact resistance: 120mo max. No damage, cracks or parts dislocation. No deformation of components affecting performance. 8.Mating Cycles 9.Resistance to soldering heat 30 cycles Reflow: At the recommended temperature profile Manual soldering: 360c for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The term "storage" refers to products stored for long periods of time prior to mounting and use. Operating temperature range and humidity range includes non-conducting condition of installed connectors in storage, shipment or during transportation. Materials / Finish Part Material Finish Remarks Insulator Polyamide Color: Black UL94V-0 Header Contacts Ground plates Phosphor bronze Engagement Area: Gold Plated of 0.1m Receptacle Termination Area: Flash Plated Metal fittings ------- Flash plated ------- Tin plated ------- Product Number Structure FX12 q B - 24 P - 0.4 SV (**) w q Series name : FX12 w Configuration B : Without guide post e Number of contacts : 24, 40, 60 e r t y u r Connector type P : Header S : Receptacle t Contact pitch : 0.4 mm y Mounting style SV : SMT u Blank : Embossed tape packing (3,000 pcs/reel) ( 30 ) : Embossed tape packing (100 pcs/reel) 2 FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding Header 4.90.2 A0.12 B0.1 P=0.40.06 (0.15) (0.3) (0.1) 1.340.3 C0.3 BRecommended PCB Layout and Metal Mask Dimensions 0.230.02 (Land pattern ) 0.20.02 (Metal mask) Recommended metal mask thickness: 0.12 mm A0.12 B 0.4 0.40.02 (Land pattern) 0.350.02 (Metal mask) 1 Notes: 1 Positions marked indicate a ground circuit connections. 2 The co-planarity of SMT terminations is 0.1 maximum. 3 No polarity orientation for board mounting. 4 Dimensions in parentheses ( ) are reference dimensions. 5 All dimensions in mm. 1 +0.10(Land pattern) 0.90.02 (Metal mask) 5.2 +0.05 0 0 3.8 -0.05 0 3.4 -0.05 G0.04 0 D -0.1 0 E+0.1 Part No. FX12B-24P-0.4SV(**) FX12B-40P-0.4SV(**) FX12B-60P-0.4SV(**) HRS No. 573-1005-0 ** 573-1001-0 ** 573-1007-6 ** No. of Contacts 24 40 60 A B C D E RoHS 5.4 8.6 12.6 4.4 7.6 11.6 10.6 13.8 17.79 09.1 12.3 16.3 11.0 14.2 18.2 Yes Blank : Embossed tape packing (3,000 pcs/reel) ( 30 ) : Embossed tape packing (100 pcs/reel) Receptacle 4.20.2 A0.12 B0.1 P=0.40.06 (0.3) (0.15) 1.20.3 (0.1) C0.3 BRecommended PCB Layout and Metal Mask Dimensions G 0.230.02 (Land pattern) 0.20.02 (Metal mask) 0.4 0.40.02 (Land pattern) 0.350.02 (Metal mask) 5 0 2 -0.1 4 5.3 MIN. G0.04 Recommended metal mask thickness: 0.12 mm A0.12 B 1 +0.10 (Land pattern) 0.90.02 (Metal mask) 4.6 +0.05 0 0 3.04 -0.05 0 2.76 -0.05 Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. G Notes: 1 Positions marked indicate a ground circuit connections. 2 The co-planarity of SMT terminations is 0.1 maximum. 3 No polarity orientation for board mounting. 4 5 0 D -0.1 E +0.1 0 4 F MIN. Part No. FX12B-24S-0.4SV(**) FX12B-40S-0.4SV(**) FX12B-60S-0.4SV(**) 1 6 7 HRS No. 573-1006-3 ** 573-1002-2 ** 573-1008-9 ** Do NOT place any components within area indicated by the broken line Do NOT place conductive traces in areas indicated by . Dimensions in parentheses ( ) are reference dimensions. All dimensions in mm. No. of Contacts 24 40 60 A B C D E F RoHS 5.4 8.6 12.6 4.4 7.6 11.6 8.14 11.34 15.34 6.6 9.8 13.8 08.5 11.7 15.7 11.1 14.3 18.3 Yes . Blank : Embossed tape packing (3,000 pcs/reel) ( 30 ) : Embossed tape packing (100 pcs/reel) 3 FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding Embossed Carrier Tape and Reel Dimensions Reel dimensions ' %#* 8 %# * & &#, %#( ( #* & %# % & &'%#& )%#& (-% -% 6%#& 7%#( '%#& &#,*%#& Header Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. JcgZZa^c\Y^gZXi^dc Part No. FX12B-24P-0.4SV(**) FX12B-40P-0.4SV(**) FX12B-60P-0.4SV(**) A B C 11.5 24.0 24.4 14.2 32.0 32.4 All dimensions in mm Embossed Carrier Tape and Reel Dimensions Reel dimensions B C 11.5 24.0 24.4 ' %#* JcgZZa^c\Y^gZXi^dc Part No. FX12B-24S-0.4SV(**) FX12B-40S-0.4SV(**) FX12B-60S-0.4SV(**) All dimensions in mm 4 (-% -% 6%#& 7%#( & & &#, %#( * A #* %# &'%#& )%#& ( & %# % '%#& &#,*%#& Receptacle 8 FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding BRecommended solder temperature profile. The temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the PCB mounting surface. MAX 250c < HRS test conditions > 260 Solder method Environment Solder paste Test board 240 220c Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. Temperature (c) 220 200c 200 180 160 140 0 Metal mask Reflow cycles 150c (90~120sec.) (MAX 60sec.) Preheating (150 to 200c) Soldering (220c min) Time (Seconds) :Reflow :Room air :96.5%Sn/3.0%Ag/0.5%Cu :Glass epoxy 40mm30mm1mm thick :0.12mm thick :2cycles Note 1 : The temperature profiles shown are based on the above conditions. Note 2 : In individual applications the actual temperature may very, depending on solder paste type, volume / thickness and board size/ thickness. Note 3 : Cosult your solder paste and equipment manufacture for specific recommendations. BWashing Conditions Organic solvent Washing Solvent type IPA (Isoporopyl alcohol) Room temperature washing Yes Heated washing Yes Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Be careful that parts are not left with moisture remaining on them. Washing Precautions Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. 5 FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding BHandling Precautions when mating mounted connectors. MAX 0.3 FX12*-**S-0.4SV MAX 0.3 Start the engagement of the connectors within the specified selfalignment range of 0.3 mm, while keeping the boards parallel to each other. FX12*-**P-0.4SV Fig.1 Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. Do NOT start mating of the mounted connectors at an angle. Correctly position the connectors over each other and assure that both boards are parallel to each other. Incorrect (0.5mm) Incorrect (0.5mm) When the connectors are correctly aligned (and both boards are parallel to each other) apply even force until full mating is confirmed by the "click" sensation. Caution When the connectors are mounted on the FPC, care should taken to prevent the mated connectors from bending or twisting on the FPC. The device case or cushioning material should be used to keep the connectors fully mated and supported. BHandling Precautions when un-mating Keep the boards (with mounted connectors) parallel to each other. If parallel disconnection is impossible, start un-mating at one end, exercising extreme caution to apply force at the center of the connector itself, away from the solder joint rows (Ref. Fig A and Fig. B) Incorrect Fig. A Fig. B Do NOT start disconnection at the sides as the connector can be damaged, voiding the warranty and making the re-engagement impossible. Incorrect 6 FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding BTechnical Documentation Eye Pattern Output Waveform 60 Sample 1 50 Sample 2 Shielding Effect (dB) Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. Shielding Characteristics (1) (Measurement Results Using a 2-Chamber Shielded Room) 40 Sample 3 30 20 10 0 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2 3 Frequency (GHz) Explanatory Note Measurement values of the unshielded connectors were set as the zero level of the vertical axis of the graph. The graph uses unshielded connectors as the reference and indicates the noise leakage suppression (shielding) effect of the shielded connectors as a relative comparison value. In comparison to the unshielded connectors there was a noise suppression effect of 10 dB to 30 dB over the frequency range of 100 MHz to 3 GHz. Shielding Characteristics (2) (Board-to-Board Shielding Comparison Using a Magnetic Field Probe Method: IEC 61967-6 Compliance) [dBA /m] 125.00 122.50 120.00 117.50 115.00 112.50 110.00 107.50 105.00 102.50 100.00 Without shielding With shielding Explanatory Note A signal of the 266 MHz operating frequency was transmitted through all contacts, over a frequency range of 10 MHz to 3 GHz. The magnetic field leaking to the surroundings from the gap between the boards was measured with a magnetic probe to provide the (mapping data) results. 7 Nov.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved. FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : +1-805-522-7958 Fax : +1-805-522-3217 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 3255 Scott Boulevard, Building 7, Suite 101 Santa Clara, CA 95054 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE 580 Waters Edge Lane, Suite 205 Lombard IL 60148 Phone : +1-630-282-6701 Mail : inquiries@hirose.com http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : +49-711-4560-02-1 Fax : +49-711-4560-02-299 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE Muggenhofer Str. 136 90429 Nuernberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : +33 (0) 1 7082 3170 Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose.com/tw/ KOREA: HIROSE KOREA CO., LTD. 250, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, Korea, 429-849 Phone : +82-31-496-7000,7124 Fax : +82-31-496-7100 http://www.hirose.co.kr/ SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India 079903, Singapore Phone : +91-12-660-8018 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +65-6324-6123 http://www.hirose.com/sg/ http://www.hirose.com/sg/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. 1-10-07, Suntech @ Penang Cybercity (1164),Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/ (R) 8 THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 08/2015. Contents are subject to change without notice for the purpose of improvements.