PRODUCT DATA SHEET
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2009 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
The Connor-Winfield HV5x-
xxxG series is a 5.0V HCMOS,
14 Pin DIP hermetically sealed,
Voltage Controlled Crystal
Oscillator (VCXO). Based on a
fundamental crystal design the
is designed for
phased lock loop applications
requiring low jitter and tight
frequency stability.
HV5x-xxxG
12
5.0V OPERATION
FREQUENCY RANGE:
30 to 100 MHz
FREQUENCY STABILITY
HV51-xxxG SERIES ±25PPM
HERMETICALLY SEALED PACKAGE
RoHS COMPLIANT / LEAD FREE
HV52-xxxG SERIES ±50PPM
HV53-xxxG SERIES ±100PPM
HV54-xxxG SERIES ±20PPM
HV55-xxxG SERIES ±10PPM
TEMPERATURE RANGE: 0 to 70
LOW JITTER <1ps RMS
°C
14 PIN 5.0V HCMOS VCXO
HIGH FREQUENCY
Vx554 03 02/11/09
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
ORDERING INFORMATION
FEATURES
DESCRIPTION
CW 0611
HV54-150G
77.76M
HV51-xxxG Series
HV55-xxxG Series
HV54-xxxG Series
HV53-xxxG Series
HV52-xxxG Series
VCXO
SERIES
CENTER
FREQUENCY
HV54-150G - 077.76M
PACKAGE CHARACTERISTICS TABLE 7.0
Package Hermetically sealed, metal package.
ABSOLUTE MAXIMUM RATINGS TABLE 1.0
PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE
Storage Temperature -55 - 125 °C
Supply Voltage (Vcc) -0.5 - 7 Vdc
Control Voltage (Vc) -0.5 - 7 Vdc
MODEL SPECIFICATIONS
MODEL NUMBER TABLE 2.0
HV51-xxxG Frequency Stability: -25 - 25 ppm 1
HV52-xxxG Frequency Stability: -50 - 50 ppm 1
HV53-xxxG Frequency Stability: -100 - 100 ppm 1
HV54-xxxG Frequency Stability: -20 - 20 ppm 1
HV55-xxxG Frequency Stability: -10 - 10 ppm 1
Pullability Codes (xxx - Add code to the end of the Model Number) TABLE 3.0
050 Frequency Pullability: ±25 - - ppm 2
100 Frequency Pullability: ±50 - - ppm 2
150 Frequency Pullability: ±75 - - ppm 2
160 Frequency Pullability: ±80 - - ppm 2
200 Frequency Pullability: ±100 - - ppm 2, 3
240 Frequency Pullability: ±120 - - ppm 2, 3
300 Frequency Pullability: ±150 - - ppm 2, 4
OPERATING SPECIFICATIONS TABLE 4.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Frequency Range (Fo) 30 - 100 MHz
Operating Temperature Range 0 - 70 °C
Supply Voltage (Vcc) 4.75 5.0 5.25 Vdc
Supply Current < 50 MHz (Icc) - - 35 mA
Supply Current > 50 MHz (Icc) - - 60 mA
Jitter (BW=10Hz to 20MHz) - - 5 ps rms
Jitter (BW=12kHz to 20MHz) - - 1 ps rms
SSB Phase Noise at 100Hz offset - -90 - dBc/Hz
SSB Phase Noise at 1KHz offset - -100 - dBc/Hz
SSB Phase Noise at 10KHz offset - -125 - dBc/Hz
SSB Phase Noise at 100KHz offset - -135 - dBc/Hz
INPUT CHARACTERISTICS TABLE 5.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Control Voltage Range (Vc) 0.5 2.5 4.5 Vdc
Center Frequency 2.0 2.5 3.0 Vdc
Monotonic Linearity -15 - 15 %
Input Impedance - 50K - Ohm
Modulation Bandwidth (3dB) 15 --KHz
HCMOS OUTPUT CHARACTERISTICS TABLE 6.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
LOAD - - 15 pF
Voltage (High) (Voh) 4.5 - - Vdc
(Low) (Vol) - - 0.5 Vdc
Current (30 to 52 MHz) (High) (Ioh) -8 --mA
(30 to 52 MHz) (Low) (Ioh) - - 8 mA
Current (52.1 to 100 MHz) (High) (Ioh) -16 --mA
(52.1 to 100 MHz) (Low) (Ioh) - - 16 mA
Duty Cycle at 50% of Vcc 40 50 60 %
Rise / Fall Time 10% to 90% - - 3 nS
Optional Duty Cycle: measured at 50% Vcc 45 50 55 % 5
PRODUCT DATA SHEET
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2009 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
22
Vx554 03 02/11/09
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
HV54 150G 77.76 MHz
--
75
G=RoHS COMPLIANT
120°C
150°C
180°C
260°C
0
220°C
360 Sec. Max.
120 S
Max.
10 S
60 S
Max.
Time
Temperature
260°C
Solder ProfilePackage Outline and Pin Connections
Test Circuit
Example Part Number
15pF
.260 Max
(6.60mm)
Note:
1) Frequency stability vs. change in temperature, referenced to frequency measured at
25°C with control voltage @ 2.50Vdc.
2) Referenced to Fo @ 25°C. Positive Slope.
3) +/-100ppm and +/-120ppm frequency deviation is not available for frequencies above 75
MHz.
4) +/-150ppm frequency deviation is not available for frequencies above 50 MHz.
5) Add “S” to the part number before the G, Example: HV54-150SG-077.76M.
