SIMATIC NET 6GK1905-0AA00 Stand / Dated / 10.2018 Montageanleitung fur/ Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System Nachfolgend finden Sie Informationen in deutscher Sprache. This document contains information in English. A5E03375783A-03 (c) SIEMENS AG 2018 Anderungen vorbehalten Subject to change Seite 3 Page 10 Wir haben den Inhalt der Druckschrift auf Ubereinstimmung mit dem beschriebenen Produkt gepruft. Dennoch konnen Abweichungen nicht ausgeschlossen werden, so dass wir fur die vollstandige Ubereinstimmung keine Gewahr ubernehmen. Die Angaben in der Druckschrift werden jedoch regelmaig uberpruft. Notwendige Korrekturen sind in den nachfolgenden Auflagen enthalten. Fur Verbesserungsvorschlage sind wir dankbar. Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrucklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere fur den Fall der Patenterteilung oder GMEintragung. Technische Anderungen vorbehalten. Copyright (c) Siemens AG 2018 All Rights Reserved Wichtiger Hinweis Wir weisen darauf hin, dass der Inhalt dieser Montageanleitung nicht Teil einer fruheren oder bestehenden Vereinbarung, Zusage oder eines Rechtsverhaltnisses ist oder diese abandern soll. Samtliche Verpflichtungen von Siemens ergeben sich aus dem jeweiligen Kaufvertrag, der auch die vollstandige und allein gultige Gewahrleistungsregel enthalt. Diese vertraglichen Gewahrleistungsbestimmungen werden durch die Ausfuhrungen dieser Montageanleitung weder erweitert noch beschrankt. Wir weisen auerdem darauf hin, dass aus Grunden der Ubersichtlichkeit in dieser Montageanleitung nicht jede nur erdenkliche Problemstellung im Zusammenhang mit dem Einsatz dieses Produkts beschrieben werden kann. Sollten Sie weitere Informationen benotigen oder sollten besondere Probleme auftreten, die in der Montageanleitung nicht ausfuhrlich genug behandelt werden, konnen Sie die erforderliche Auskunft uber die ortliche Siemens-Niederlassung anfordern. Anforderung an die Qualifikation des Personals Qualifiziertes Personal im Sinne dieser Montageanleitung bzw. der Warnhinweise sind Personen, die mit Aufstellung, Montage, Inbetriebsetzung und Betrieb dieses Produktes vertraut sind und uber die ihrer Tatigkeit entsprechenden Qualifikation verfugen und in erster Hilfe geschult sind. _________________________________________________________________________________ We have checked the contents of this manual for agreement with this outlet described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are welcome. Technical data subject to change. The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility or design, are reserved. Copyright (c) Siemens AG 2018 All Rights Reserved Note We would point out that the contents of this assembly instrucions shall not become a part of or modify any prior or existing agreement, commitment or legal relationship. The Purchase Agreement contains the complete and exclusive obligations of Siemens. Any statements contained in this documentation do not create new warranties or restrict the existing warranty. We would further point out that, for reasons of clarity, these assembly instrucions cannot deal with every possible problem arising from the use of this device. Should you require further information or if any special problems arise which are not sufficiently dealt with in the operating instructions, please contact your local Siemens representative. Personnel qualification requirements Qualified personnel as referred to in the assembly instrucions or in the warning notes are defined as persons who are familiar with the installation, assembly, startup and operation of this product and who possess the relevant qualifications for their work and have a First Aid qualification. A5E03375783A-02 Montageanleitung fur SIMATIC NET PROFIBUS SpliTConnect System SpliTConnect System, Abbildung Abbildungsnmmer Bezeichnung Ex 1) 1 Terminator 2 a) SpliTConnect Tap Bestell-Nr 6GK1905-0AD00 6GK1905-0AA00 b) Kontaktierelement c) Kabelanschluss oder Blindstopfen 3 Terminator 6GK1905-0AE00 4 Coupler 6GK1905-0AC00 (zur einfachen Verbindung von 2 SpliTConnect Taps) 5 M12 Outlet 6GK1905-0AB10 (fur losbare Verbindungen mit M12 Jack) 6 1) M12 Jack 6GK1905-0AF00 siehe SpliTConnect Terminator Ex (Seite 8) A5E03375783A-02 3 Montageanleitung fur SIMATIC NET PROFIBUS SpliTConnect System SpliTConnect System, Lieferumfang (6GK1905-0DA00) Anzahl Bezeichnung Abbildungsnummer 1) 1x SpliTConnact Tap 2a 1x Kontaktierelement 2b 3x Mutter M22 - 3x Zugentlastung - 3x Dichtung - 3x Schirmkontaktierelement - 3x Litzenhalter - 3x Dichtscheibe - 1x SpliTConnect Clip - 1) siehe Abbildung (Seite 3) Hinweis Vom Zubehor des SpliTConnect Systems (mit Ausnahme des Terminator Ex) besteht keine Zundgefahr und ist somit nicht Bestandteil der Zundschutzart Eigensicherheit". SpliTConnect System, Zubehor (nicht im Lieferumfang enthalten) Bezeichnung Beschreibung Bestell-Nr Abb. 1) SpliTConnect Coupler Zur Kopplung zweier oder mehrerer SpliTConnect Taps 6GK1905-0AC00 4 SpliTConnect M12 Outlet Abgang mit M12 Buchse. Verwendung anstelle des Abgangs fur Leitungsanschluss. 6GK1905-0AB10 5 SpliTConnect Terminator Zum elektrischen Abschluss eines Bussegments. 6GK1905-0AE00 3 SpliTConnect Terminator Ex Zum elektrischen Abschluss eines Bussegments. 6GK1905-0AD00 1 FastConnect Stripping Tool Werkzeug zum schnellen und einfachen abisolieren des PROFIBUS FC Process Cable 2). 6GK1905-6AA00 - PROFIBUS FC Process Cable fur Ex-Anwendungen (blau) 6XV1830-5EH10 - PROFIBUS FC Process Cable fur Nicht-Ex-Anwendungen (schwarz) 6XV1830-5FH10 - Verwendbare Leitungen 1) siehe Abbildung (Seite 3) 2) siehe Montageschritt 2 (Montage des SpliTConnect Tap) 4 A5E03375783A-02 Montageanleitung fur SIMATIC NET PROFIBUS SpliTConnect System Vorsicht Montage Die Montage von Komponenten des SpliTConnect Tap Systems darf nur an Bussegmenten erfolgen, die nicht in Betrieb sind. Andernfalls kann es zu Unfallen oder zu Funktionsstorungen kommen. Das SpliTConnect Tap System ist nur fur die Verwendung mit den SIMATIC NET PROFIBUS FC Process Cable bestimmt (Bestellnummer 6XV1830-5EH10, 6XV1830-5FH10). Bei anderweitiger Verwendung oder Einsatz anderer Leitungstypen kann es zu Unfallen, oder zur Zerstorung oder zu Funktionsstorungen des SpliTConnect Systems und der Leitung kommen. Biegeradien Beachten Sie unbedingt die zulassigen Biegeradien des PROFIBUS FC Process Cable: 60 mm - einmaliges biegen > 60 mm - mehrmaliges biegen > 120 mm. Installationsanderung Demontieren Sie erst das Kontaktierelement (2), bevor Sie Komponenten eines bereits montierten SpliTConnect Tap Systems demontieren. Ansonsten kann das Kontaktierelement (2) beschadigt werden. Wird das Kontaktierelement (2) gelost, so sind die Leitungsenden neu abzusetzen. Um eine losbare Verbindung herzustellen, ist entweder das SpliTConnect M12 Outlet oder der SpliTConnect M12 Jack zu verwenden. *HZLQGH 1. Schrauben Sie das Kontaktierelement (2) los und ziehen Sie es vom SpliTConnect Tap (1) ab. Hinweis Erdung Bei Bedarf kann das SpliTConnect Tap geerdet werden. Hierzu steht am Kontaktierelement (2) ein M4 Gewinde zur Verfugung. Es wird empfohlen einen Kabelschuh zu verwenden. A5E03375783A-02 5 Montageanleitung fur SIMATIC NET PROFIBUS SpliTConnect System Montage des SpliTConnect Tap FDP FDP P P 1. Schrauben Sie das Kontaktierelement (2) los und ziehen Sie es vom SpliTConnect Tap (1) ab. 2. Isolieren Sie die Leitung mit Hilfe 3. Halten Sie die Abisoliermae des FastConnect Stripping ein. Tool 1) ab. Achtung! Die Adern durfen 1) siehe Montageanleitung des nicht abisoliert werden. FastConnect Stripping Tool 0 . 5. Stecken Sie den Litzenhalter (7) 4. Schieben Sie Mutter (3), auf die nicht abisolierten Adern Zugentlastung (4), Dichtung (5) auf. und Schirmkontaktierelement (6) auf die Leitung. Achtung! Farbkodierung beachten. Achtung! Die Metallscheibe (M) des Schirmkontaktierelements (6) muss in Richtung Litzenhalter (7) zeigen. 6. Fuhren Sie die bestuckte Leitung in den SpliTConnect Tap (1) ein. Achten Sie dabei auf die Kodierung (K). . 1 . 7. Ziehen Sie die Mutter (3) bis zum Anschlag an. 8. Fuhren Sie die Montageschritte 2 bis 7 fur die beiden anderen Leitungsabgange durch. Achten Sie dabei auf die Kodierung (K). 9. Fuhren Sie das Kontaktierelement (2) in den SpliTConnect Tap (1) ein. Die Ausrichtung ist durch die Nut (N) und die Fuhrung im Kontaktierelement (2) vorgegeben. Achtung! Alle 3 Abgange mussen korrekt bestuckt sein. 10. Ziehen Sie das Kontaktierelement (2) bis zum Anschlag an. Zur Unterstutzung konnen Sie einen Schraubendreher durch die dafur vorgesehene Offnung im Kontaktierelement (2) stecken. 6 A5E03375783A-02 Montageanleitung fur SIMATIC NET PROFIBUS SpliTConnect System Montage nicht benutzter Ausgange 1. Schlieen Sie nicht benutzte Ausgange mit Mutter (3), Dichtung (5). Dichtscheibe (8), Schirmkontaktierelement (6) und Litzenhalter (7) ab. Achten Sie dabei auf die Reihenfolge. Montage auf einer Flache oder Hutschiene 1. Zur Montage auf einer ebenen Flache oder auf einer Hutschiene, stecken Sie den fertig montierten SpliTConnect Tap (1) auf den SplitConnect Clip (9) auf. Vorsicht Der SpliTConnect Tap dient nicht als Zugentlastung fur die PROFIBUS-Leitung. Die Leitung muss daher zugentlastet angebracht werden! Montage des SpliTConnect Coupler 1. Schrauben Sie den SpliTConnect Coupler (10) auf einen freien Leitungsabgang eines SpliTConnect Tap (1) auf. Achtung! Das Kontaktierelement (2) muss demontiert sein. 2. Schrauben Sie den SpliTConnect Coupler (10) auf einen freien Leitungsabgang eines zweiten SpliTConnect Tap (1) auf. 3. Schrauben Sie die Kontaktierelemente (2) auf die komplett bestuckten SpliTConnect Tap auf. A5E03375783A-02 7 Montageanleitung fur SIMATIC NET PROFIBUS SpliTConnect System Montage des SpliTConnect M12 Outlet 1. Schrauben Sie das SpliTConnect M12 Outlet (11) auf einen freien Leitungsabgang eines SpliTConnect Tap (1) auf. Achtung! Das Kontaktierelement (2) muss demontiert sein 2. Schrauben Sie das Kontaktierelement (2) auf den komplett bestuckten SpliTConnect Tap (1) auf. 6LJQDO$ 3,1 6FKLUP 3,1 QRW FRQQHFWHG 6LJQDO% 3LQ Montage des SpliTConnect Terminator bzw. Terminator Ex 1. Fuhren Sie den SpliTConnect Terminator Ex (12) in den SpliTConnect Tap (1) ein. Die Ausrichtung ist durch die Nut (N) und die Fuhrung im SpliTConnect Terminator Ex (12) vorgegeben. Achtung! Alle 3 Abgange mussen korrekt bestuckt sein. 1 2. Ziehen Sie den SpliTConnect Terminator Ex (12) bis auf Anschlag an. Zur Unterstutzung konnen Sie einen Schraubendreher durch die dafur vorgesehene Offnung im SpliTConnect Terminator Ex (12) stecken. SpliTConnect Terminator Ex (6GK1905-0AD00) ATEX-Kennzeichnung: Ex II 1G Ex ia IIC T6 Ga Kenngroen (Terminator Ex) Zum Anschluss an einen eigensicheren Stromkreis der Zundschutzart Ex ia IIC mit den Hochstwerten: Maximale Ausgangsspannung (Uo) DC 24 V Maximale Ausgangsstromstarke (Io) 380 mA Maximale Ausgangsleistung (Po) 5,32 W Umgebungstemperatur (Ta) -20 C ... +50 C Standards (Terminator Ex) EN 60079-0:2009 Allgemeine Anforderungen EN 60079-11:2007 Eigensicherheit EN 60079-26:2007 Gerategruppe II, Kategorie 1G EN 60079-28:2008 Konzept fur eigensichere Feldbussysteme (FISCO) 8 A5E03375783A-02 Montageanleitung fur SIMATIC NET PROFIBUS SpliTConnect System Technische Daten des SpliTConnect System Elektrische Daten Gema PROFIBUS-Spezifikation IEC 61158-2 Datenrate 31,25 kbit/s Anschlusstechnik Kontaktierhaufigkeit Schneidklemmtechnik 1) Kabeldurchfuhrung Erdanschluss 2) 4 mal M22 M4 Schutzart IP67 3) Gehausewerkstoff PBT mit 10% GF + 10% CF Schockbeanspruchung 30g / 11ms Schwingbeanspruchung 10 ... 58 Hz 0,075 mm Amplitude Umgebungstemperatur -40 C ... +85 C Lagertemperatur -40 C ... +85 C 1) Der Schneid-Klemmkontakte des Kontaktierelements, des Outlets, des Couplers, des Terminators und des Terminators Ex. Wenn erneut kontaktiert wird, muss die Leitung unbedingt neu abgesetzt werden. 2) Es wird empfohlen, einen Kabelschuh zu verwenden. 3) Nur wenn alle Abgange ordnungsgema bestuckt sind. UL-Zulassung 1 UL 1950 - Safety of Information Technology Equipment File Nr. E 198 565 A5E03375783A-02 9 Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System SpliTConnect System, schematic Figure number Name Order no. Ex 1) 1 Terminator 2 a) SpliTConnect Tap 6GK1905-0AD00 6GK1905-0AA00 b) Contacting element c) Cable connector or dummy plug 3 Terminator 6GK1905-0AE00 4 Coupler 6GK1905-0AC00 (for single connection of 2 SpliTConnect taps) 5 M12 Outlet 6GK1905-0AB10 (for pluggable connections with M12 jack) 6 1) M12 Jack 6GK1905-0AF00 refer SpliTConnect Terminator Ex (page 15) 10 A5E03375783A-02 Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System SpliTConnect System, components of the product (6GK1905-0DA00) Number Name Number in schematic 1) 1x SpliTConnect Tap 2a 1x Contacting element 2b 3x Nut M22 - 3x Strain relief - 3x Seal - 3x Shield contact element - 3x Strand holder - 3x Sealing washer - 1x SpliTConnect Clip - 1) refer figure (page 10) Note The accessories of the SpliTConnect system (with the exception of the Terminator Ex) do not represent any ignition risk and are therefore not included in the type of protection "intrinsic safety". SpliTConnect system, accessories (do not ship with the product) Name Description Order no. Fig. 1) SpliTConnect Coupler To couple two or more SpliTConnect taps 6GK1905-0AC00 4 SpliTConnect M12 Outlet Outlet with M12 jack. Used instead of the outlet for cable connector. 6GK1905-0AB10 5 SpliTConnect Terminator For electrical connection of a bus segment. 6GK1905-0AE00 3 SpliTConnect Terminator Ex For electrical connection of a bus segment. 6GK1905-0AD00 1 FastConnect Stripping Tool Tool for fast and simple stripping of the PROFIBUS FC process cable 2). 6GK1905-6AA00 - PROFIBUS FC process cable for Ex applications (blue) 6XV1830-5EH10 - PROFIBUS FC process cable for non-Ex applications (black) 6XV1830-5FH10 - Usable cables 1) refer figure (page 10) 2) refer to assembly step 2 (assembling the SpliTConnect tap) A5E03375783A-02 11 Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System Caution Assembly Components of the SpliTConnect tap system must only be assembled in bus segments that are not operational. Otherwise accidents or functional disruptions are possible. The SpliTConnect tap system is intended only for use with the SIMATIC NET PROFIBUS FC process cable (order number 6XV1830-5EH10, 6XV1830-5FH10). If put to other use or when used with other cable types, this can lead to accidents or destruction or functional disruption of the SpliTConnect system and the cable. Bend radii Make sure that you keep to the permitted bend radii of the PROFIBUS FC process cable: 60 mm - bending once > 60 mm - multiple bending > 120 mm. Changing the installation First dismantle the contacting element (2) before you dismantle components of a previously assembled SpliTConnect tap system. Otherwise the contacting element (2) may be damaged. If you remove the contacting element (2), the ends of the cables must be stripped and prepared again. If you want a pluggable connection, use either the SpliTConnect M12 outlet or the SpliTConnect M12 jack. *HZLQGH 1. Unscrew the contacting element (2) and pull it away from the SpliTConnect tap (1). Note Grounding if necessary, the SpliTConnect tap can be grounded. An M4 threaded hole is available on the contacting element (2) for this. It is advisable to use a cable lug. 12 A5E03375783A-02 Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System Assembling the SpliTConnect tap FDP FDP P P 1. Unscrew the contacting element (2) and pull it away from the SpliTConnect tap (1). 3. Keep to the stripping lengths. Caution! The wires must not be stripped. 2. Strip the cable with the FastConnect stripping tool 1). 1) Refer to the assembly instructions for the FastConnect stripping tool 0 . 4. Push the nut (3), strain relief (4), seal (5) and shield contact element (6) onto the cable. Caution! The metal washer (M) of the shield contact element (6) must point in the direction of the strand holder (7). 5. Place the strand holder (7) onto the insulated wires. Caution! Keep to the color coding. 6. Insert the assembled cable in the SpliTConnect tap (1). Make sure that the coding (K) is correct. . 1 . 7. Tighten the nut (3) as far as it will go. 8. Work through assembly steps 2 to 7 for the other two cable outlets. Make sure that the coding (K) is correct. 9. Insert the contacting element (2) in the SpliTConnect tap (1). The alignment is decided by the groove (N) and the guide on the contacting element (2). Caution! All 3 outlets must be correctly assembled. 10. Tighten the contacting element (2) as far as it will go. It may help to insert a screwdriver through the opening in the contacting element (2). A5E03375783A-02 13 Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System Assembling unused outputs 1. Close unused outputs with nut (3), seal (5), sealing washer (8), shield contact element (6) and strand holder (7). Make sure they are fitted in the correct order. Installation on a surface or DIN rail 1. To install on a flat surface or a DIN rail, fit the assembled SpliTConnect tap (1) to the SplitConnect clip (9). Caution The SpliTConnect tap is not intended as strain relief for the PROFIBUS cable. The cable must therefore be relieved of any strain before it is connected! Assembling the SpliTConnect coupler 1. Screw the SpliTConnect coupler (10) to a free cable outlet of a SpliTConnect tap (1). Caution! The contacting element (2) must first be removed. 2. Screw the SpliTConnect coupler (10) to a free cable outlet of a second SpliTConnect tap (1). 3. Screw the contacting elements (2) onto the completely assembled SpliTConnect tap. 14 A5E03375783A-02 Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System Fitting the SpliTConnect M12 outlet 1. Screw the SpliTConnect M12 Outlet (11) onto a free cable outlet of a SpliTConnect tap (1). Caution! The contacting element (2) must first be removed 2. Screw the contacting element (2) onto the completely assembled SpliTConnect tap (1). 6LJQDO$ 3,1 6FKLUP 3,1 QRW FRQQHFWHG 6LJQDO% 3LQ Fitting the SpliTConnect terminator or terminator Ex 1. Insert the SpliTConnect terminator Ex (12) in the SpliTConnect tap (1). The alignment is decided by the groove (N) and the guide on the SpliTConnect terminator Ex (12). Caution! All 3 outlets must be correctly assembled. 1 2. Tighten the SpliTConnect terminator Ex (12) as far as it will go. It may help to insert a screwdriver through the opening in the SpliTConnect terminator Ex (12). SpliTConnect terminator Ex (6GK1905-0AD00) ATEX identifier : Ex II 1G Ex ia IIC T6 Ga Characteristics (terminator Ex) For connection to an intrinsically safe circuit with degree of protection Ex ia IIC with the following maximum values: Maximum output voltage (Uo) 24 VDC Maximum output current (Io) 380 mA Maximum output power (Po) 5.32 W Ambient temperature (Ta) -20 C to +50 C Standards (terminator Ex) EN 60079-0:2009 General requirements EN 60079-11:2007 Intrinsic safety EN 60079-26:2007 Device group II, category 1G EN 60079-28:2008 Concept for intrinsically safe fieldbus systems (FISCO) A5E03375783A-02 15 Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System Technical specifications of the SpliTConnect system Electrical data Complying with PROFIBUS Specification IEC 61158-2 Data rate 31.25 Kbps Connector technology Contacting cycles 1) 4 times Cable feedthrough Ground connection Insulation piercing technique M22 2) M4 Degree of protection IP67 3) Housing material PBT with 10% GF + 10% CF Shock resistance 30 g / 11 ms Vibration strain 10 to 58 Hz 0.075 mm amplitude Ambient temperature -40 C to +85 C Storage temperature -40 C to +85 C 1) The insulation piercing contacts of the contacting element, the outlet, the coupler, the terminator and the terminator Ex. When recontacted, the cable must be restripped. 2) We recommend that you use a cable lug. 3) Only when all outlets are correctly assembled. UL approval 1 16 UL 1950 - Safety of Information Technology Equipment File No. E 198 565 A5E03375783A-02