NVMFS5833N Power MOSFET 40 V, 7.5 mW, 86 A, Single N-Channel, SO-8FL Features * * * * * * Low RDS(on) Low Capacitance Optimized Gate Charge AEC-Q101 Qualified and PPAP Capable NVMFS5833NWF - Wettable Franks Option for Enhanced Optical Inspection These Devices are Pb-Free and are RoHS Compliant http://onsemi.com V(BR)DSS RDS(ON) MAX ID MAX 40 V 7.5 mW @ 10 V 86 A D (5) MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Value Unit Drain-to-Source Voltage VDSS 40 V Gate-to-Source Voltage VGS "20 V ID 86 A Parameter Continuous Drain Current RYJ-mb (Notes 1, 2, 3 & 4) Power Dissipation RYJ-mb (Notes 1, 2, 3) Continuous Drain Current RqJA (Notes 1, 3 & 4) Power Dissipation RqJA (Notes 1 & 3) Pulsed Drain Current Tmb = 25C Steady State Tmb = 100C Tmb = 25C Steady State N-CHANNEL MOSFET PD ID Operating Junction and Storage Temperature Source Current (Body Diode) Single Pulse Drain-to-Source Avalanche Energy (TJ = 25C, IL(pk) = 36 A, L = 0.1 mH) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) MARKING DIAGRAM D A 16 1 11 PD TA = 100C TA = 25C, tp = 10 ms W 112 56 TA = 100C TA = 25C S (1,2,3) 61 Tmb = 100C TA = 25C G (4) W 3.7 1.8 IDM 324 A TJ, Tstg -55 to 175 C IS 86 A EAS 65 mJ TL 260 C SO-8 FLAT LEAD CASE 488AA STYLE 1 5833 xx A Y W ZZ Junction-to-Ambient - Steady State (Note 3) Symbol Value Unit RYJ-mb 1.3 C/W RqJA 41 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Psi (Y) is used as required per JESD51-12 for packages in which substantially less than 100% of the heat flows to single case surface. 3. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 4. Continuous DC current rating. Maximum current for pulses as long as 1 second are higher but are dependent on pulse duration and duty cycle/ (c) Semiconductor Components Industries, LLC, 2014 September, 2014 - Rev. 1 D D = Specific Device Code = N (NVMFS5833N) or = WF (NVMFS5833NWF) = Assembly Location = Year = Work Week = Lot Traceability Package Shipping NVMFS5833NT1G SO-8FL (Pb-Free) 1500 / Tape & Reel NVMFS5833NT3G SO-8FL (Pb-Free) 5000 / Tape & Reel NVMFS5833NWFT1G SO-8FL (Pb-Free) 1500 / Tape & Reel NVMFS5833NWFT3G SO-8FL (Pb-Free) 5000 / Tape & Reel Device THERMAL RESISTANCE MAXIMUM RATINGS Junction-to-Mounting Board (top) - Steady State (Notes 2, 3) D 5833xx AYWZZ ORDERING INFORMATION Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Parameter S S S G 1 For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NVMFS5833N/D NVMFS5833N ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 40 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS 32.6 VGS = 0 V, VDS = 40 V mV/C TJ = 25C 1.0 TJ = 125C 100 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA Gate-to-Source Leakage Current V 100 mA nA ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Threshold Temperature Coefficient Drain-to-Source On Resistance VGS(TH)/TJ 2.0 3.5 -7.6 V mV/C RDS(on) VGS = 10 V, ID = 40 A 6.2 gFS VDS = 5 V, ID = 5 A 38 S 1714 pF Forward Transconductance 7.5 mW CHARGES AND CAPACITANCES Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss 144 Total Gate Charge QG(TOT) 32.5 Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS Gate-to-Drain Charge QGD 9 td(on) 10.23 VGS = 0 V, f = 1.0 MHz, VDS = 25 V VGS = 10 V, VDS = 32 V, ID = 40 A 210 nC 2.77 7.37 SWITCHING CHARACTERISTICS (Note 6) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time tr td(off) VGS = 10 V, VDS = 20 V, ID = 40 A, RG = 2.5 W tf ns 19.5 23.60 3.00 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD Reverse Recovery Time tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 40 A TJ = 25C TJ = 125C 0.85 QRR V 0.7 23.5 VGS = 0 V, dIS/dt = 100 A/ms, IS = 40 A 1.2 ns 13.5 10 14 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 5. Pulse Test: pulse width = 300 ms, duty cycle v 2%. 6. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NVMFS5833N TYPICAL CHARACTERISTICS 110 110 TJ = 25C 5.5 V 80 VGS = 6 V 70 60 4.5 V 50 40 30 4.0 V 20 10 0 0 0.5 1.0 1.5 2.0 2.5 VDS, DRAIN-TO-SOURCE VOLTAGE (V) VDS = 3 V 100 5.0 V 90 ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 8V 10 V 100 90 80 70 60 50 30 20 10 0 3.0 TJ = 25C 40 TJ = 125C 1 23 21 ID = 40 A TJ = 25C 19 17 15 13 11 9 7 5 4 5 7 6 9 8 5 6 2 3 4 VGS, GATE-TO-SOURCE VOLTAGE (V) 7 Figure 2. Transfer Characteristics RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) Figure 1. On-Region Characteristics TJ = -55C 10 VGS, GATE-TO-SOURCE VOLTAGE (V) 6.4 TJ = 25C 6.3 6.2 6.1 VGS = 10 V 6.0 5.9 10 20 30 40 50 ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage ID = 40 A 1.8 VGS = 10 V VGS = 0 V 10000 IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) 100000 2.0 1.6 1.4 1.2 1.0 TJ = 150C TJ = 125C 1000 TJ = 85C 100 0.8 0.6 -50 10 -25 0 25 50 75 100 125 150 175 5 10 15 20 25 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage http://onsemi.com 3 30 NVMFS5833N 2200 C, CAPACITANCE (pF) VGS = 0 V Ciss 2000 VGS, GATE-TO-SOURCE VOLTAGE (V) TYPICAL CHARACTERISTICS TJ = 25C 1800 1600 1400 1200 1000 800 Coss 600 400 200 0 Crss 15 25 5 10 20 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 0 10 QT 8 6 Qgs 4 VGS = 10 V VDD = 32 V ID = 40 A TJ = 25C 2 0 0 30 4 Figure 7. Capacitance Variation 8 12 16 20 24 Qg, TOTAL GATE CHARGE (nC) 28 32 Figure 8. Gate-to-Source Voltage vs. Total Charge 1000 20 VDD = 20 V ID = 40 A VGS = 10 V 18 IS, SOURCE CURRENT (A) t, TIME (ns) Qgd 100 td(off) tr 10 td(on) tf VGS = 0 V 16 14 12 10 8 6 TJ = 125C 4 2 TJ = 25C 0 1 1 10 RG, GATE RESISTANCE (W) 0.4 100 Figure 9. Resistive Switching Time Variation vs. Gate Resistance 0.6 0.7 0.8 0.5 VSD, SOURCE-TO-DRAIN VOLTAGE (V) 0.9 Figure 10. Diode Forward Voltage vs. Current 100 100 10 TJ (initial) = 25C 100 ms IPEAK (A) ID, DRAIN CURRENT (A) 10 ms VGS = 10 V TC = 25C 2 oz. 650 mm2 Cu Pad 1 ms 1 10 ms 0.1 RDS(on) Limit Thermal Limit Package Limit 0.01 0.1 dc TJ (initial) = 85C 10 1 1 10 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 100 1E-06 Figure 11. Maximum Rated Forward Biased Safe Operating Area 1E-04 1E-05 TIME IN AVALANCHE (s) Figure 12. Avalanche Characteristics http://onsemi.com 4 1E-03 NVMFS5833N TYPICAL CHARACTERISTICS RqJA(t) (C/W) EFFECTIVE TRANSIENT THERMAL RESISTANCE 100 Duty Cycle = 0.5 10 0.2 0.1 0.05 1 0.02 0.01 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 PULSE TIME (sec) Figure 13. Thermal Response http://onsemi.com 5 1 10 100 1000 NVMFS5833N PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 488AA ISSUE K 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.20 C D A 2 B D1 2X 0.20 C 4X E1 q E 2 c 1 2 3 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q A1 4 TOP VIEW 0.10 C 3X C e SEATING PLANE DETAIL A A 0.10 C SIDE VIEW 8X b 0.10 C A B 0.05 c 3X 4X 1.270 0.750 4X 1.000 e/2 L 1 4 0.965 K 1.330 2X 0.905 2X E2 PIN 5 (EXPOSED PAD) G STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN SOLDERING FOOTPRINT* DETAIL A MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 --- 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.00 5.15 5.30 4.70 4.90 5.10 3.80 4.00 4.20 6.00 6.15 6.30 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.61 0.71 1.20 1.35 1.50 0.51 0.61 0.71 0.125 REF 3.00 3.40 3.80 0_ --- 12 _ L1 M 0.495 4.530 3.200 0.475 D2 2X 1.530 BOTTOM VIEW 4.560 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NVMFS5833N/D