TSM4
www.vishay.com Vishay Sfernice
Revision: 12-Jan-17 1Document Number: 51009
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 mm Square Surface Mount Miniature Trimmers Multi-Turn
Cermet Sealed
DESIGN SUPPORT TOOLS
The TSM4 trimming potentiometer has been designed for
surface mount applications and offers volumetric efficiency
5 mm x 5 mm x 3.7 mm with high performance and stability.
The TSM4 design is suitable for both manual or automatic
operation, and can withstand vapor phase and reflow
soldering techniques.
FEATURES
• 0.25 W at 70 °C
• Professional and industrial grade
• Wide ohmic range (10 to 1 M)
• Low contact resistance variation (2 % or 3 )
• Small size for optimum packaging density
• Tests according to CECC 41000 or IEC 60393-1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
click logo to get started
Available
Models
DIMENSIONS in millimeters (± 0.5 mm)
TSM4 YL TSM4 YJ TSM4 ZL TSM4 ZJ
RECOMMENDED SOLDERING AREAS
4.8
5.3
1
0.2
1.25
1.25
12 3
3 leads
0.6 x 0.15
5.13.5
1.3 Ø 1.5
Slot 0.5 x 0.4
5.1
4.8
5.3
1
0.2
1.25
1.25
12 3
3 leads
0.6 x 0.15
3.8
3.5
0.7
Ø 1.5
Slot 0.5 x 0.4
5.1
0.7
0.7
6.2
0.2
1.25
1
1.25
1
2
3
3 leads
0.6 x 0.15
3.5
4.8
2.3 min.
2.7
Ø 1.5
Slot 0.5 x 0.4
4.6
3.7
0.2
1.25
1
1.25
1
2
3
3 leads
0.6 x 0.15
0.8
3.5
4.8
1.2
min.
2.7
Ø 1.5
Slot 0.5 x 0.4
4.6
3.7
5.1
max.
1.8
1.3
3.8
2.54
2
2
1.8
1.3
2.9
2.54
1.6
1.6
1.8
1.3
5.3
2.3
1.6
2.3
1.8
1.3
4
2.3
2
2
TSM4
www.vishay.com Vishay Sfernice
Revision: 12-Jan-17 2Document Number: 51009
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL SPECIFICATIONS
Resistive element Cermet
Electrical travel 11 turns ± 2
Resistance range 10 to 1 M
Standard series 1 - 2 - 5
Tolerance standard ± 10 %
Power rating
Linear 0.25 W at 70 °C
Circuit diagram
Temperature coefficient See Standard Resistance Element table
Limiting element voltage (linear law) 200 V
Contact resistance variation (typical) 2 % or 3
End resistance (typical) 1
Dielectric strength (RMS) 600 V
Insulation resistance (500 VDC)10
6 M
MECHANICAL SPECIFICATIONS
Mechanical travel 13 turns ± 2
Operating torque (max. Ncm) 1
End stop torque (Ncm) Clutch action (2 turns max.)
Unit weight (max. g) 0.15
Wiper (actual travel) Positioned at approx. 50 %
ENVIRONMENTAL SPECIFICATIONS
Temperature range -55 °C to +125 °C
Climatic category 55/125/56
Sealing Sealed container IP67
MSL level 1
SOLDERING RECOMMENDATIONS
Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029
0.25
0.125
0
0155
AMBIENT TEMPERATURE IN °C
RATED POWER IN W
50 70 100
a
(1)
b
(2)
c
(3)
cw
TSM4
www.vishay.com Vishay Sfernice
Revision: 12-Jan-17 3Document Number: 51009
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability
PERFORMANCES
TESTS CONDITIONS TYPICAL VALUES AND DRIFTS
RT/RTR1-2/R1-2 OTHER
Electrical endurance 1000 h at rated power
90'/30' - ambient temp. 70 °C ± 2 % ± 3 % Contact res. variation: < 1 % Rn
Climatic sequence
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold -55 °C
Phase D damp heat 5 cycles
± 2 % ± 3 % Dielectric strength: 600 VRMS
Insulation resistance: > 104 M
Damp heat, steady state Temperature 40 °C - RH 93 %
56 days ± 2 % ± 3 % Dielectric strength: 600 VRMS
Insulation resistance: > 104 M
Change of temperature -55 °C to +125 °C
5 cycles ± 1 % V1-2/V1-3 ± 2 %
Mechanical endurance 100 cycles - rated power ± (3 % + 3 )
Shock 50 g - 11 ms
3 successive shocks in 3 directions ± 1 % V1-2/V1-3 ± 1 %
Vibration 10 Hz to 55 Hz
0.75 mm or 10 g - 6 h ± 1 % V1-2/V1-3 ± 1 %
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
LINEAR LAW TYPICAL
TCR
-55 °C
+125 °C
MAX. POWER
AT 70 °C
MAX. WORKING
VOLTAGE
MAX. CURRENT
THROUGH ELEMENT
W V mA ppm/°C
10 0.25 1.58 158
± 100
20 0.25 2.23 112
50 0.25 3.53 77
100 0.25 5.00 50
200 0.25 7.07 35
500 0.25 11.2 22
1K 0.25 15.8 15.8
2K 0.25 22.3 11.2
5K 0.25 35.3 7.1
10K 0.25 50.0 5.0
20K 0.25 70.7 3.5
50K 0.25 112 2.2
100K 0.25 158 1.6
200K 0.25 200 1.0
500K 0.08 200 0.4
1M 0.04 200 0.2
MARKING
Vishay trademark, ohmic value, manufacturing date
The ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier.
Example: 100 = 10 
101 = 100 
102 = 1000 
503 = 50 000
TSM4
www.vishay.com Vishay Sfernice
Revision: 12-Jan-17 4Document Number: 51009
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGING in millimeters
On tape and reel, by 500 pieces for Z version: Code TR500, or 250 pieces for Y version: Code TR250.
In bulk on request (plastic box of 50 pieces): Code BO50.
Version Y
Version Z
ORDERING INFORMATION (part number)
MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL
NUMBER
TSM4 YJ
YL
ZJ
ZL
From
10 to 1 M
504 = 500 k
K = 10 % R10 =
reel 500 pieces
for ZJ and ZL
R05 =
reel 250 pieces
for YJ and YL
On request
B25 =
box of 50 pieces
(If applicable)
Given by
Vishay
for custom
design
DESCRIPTION (for information only)
TSM4 YL 500K 10 % TR e3
MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD (Pb)-FREE
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029
Ø 178
Ø 23
Ø 12.7
Ø 70
13
2
12
4
2
Ø 1.5
12
7.25
1.75
6.46 5.5
0.3
0550 K4RLM4YST
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED