EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk
EURO
QUARTZ
5 x 3.2mm SMD Dual Frequency Selectable Oscillator
HC53 oscillators provide a selectable dual frequency output. With pad
1 (FSEL) presented with logic '0' the first frequency is output on pad 3.
With pad 1 presented with logic '1' the second frequency is output.
Pad 1 (FSEL) has an internal pull-up resistor connected.
Dual frequency, digitally selectable
Miniature 5.0 x 3.2mm package
Frequency Range 1.0MHz to 200MHz
Low supply current
Supply voltage range, 1.8, 2.5V or 3.3 Volts
FEATURES
OUTLINE & DIMENSIONS
Power Supply Voltage: +1.8V, +2.5V or +3.3 VDC±5%
Frequency
Vdd = +1.8V: Option 1/2 = 1MHz to 133MHz
Vdd = +2.5V: Option 1/2 = 1MHz to 166MHz
Vdd = +3.3V: Option 1/2 = 1MHz to 200MHz
Package: 5.0 x 3.2mm Ceramic Leadless SMD
Frequency Stability over Temperature*
-10° to +70°C: ±15ppm, ±25ppm, or ±50ppm
-40° to +85°C: ±25ppm, ±50ppm, ±100ppm
Output Load: 15pF max (CMOS)
Current Consumption: From 4mA to 50mA
Duty Cycle: 50%±5%.
Measured at 50%Vdd, CL = 15pF
High Level Output Voltage (VOH)
(Vdd = +3.3V): 2.90V min., condition IOH = -4mA
Low Level Output Voltage (VOL)
(Vdd = +3.3V): 0.40V max., condition IOL = +4mA
Rise Time (tr): 2.5ns max., 0.1Vdd to 0.9Vdd
15pF load, 3.3 V supply
Fall Time (tf): 2.5ns max., 0.9Vdd to 0.1Vdd
15pF load, 3.3 V supply
Pad 1 Frequency Selection (FSEL)
FSEL = 0: Output frequency is Option 1
FSEL = 1: Output frequency is Option 2
Start-Up Time: 10ms maximum
Ageing: ±5ppm max. first year
<±2ppm per year thereafter
Tape & Reel 16mm tape, 180mm reel
1000 pieces per reel
SPECIFICATION
ENVIRONMENTAL SPECIFICATION
HC53 Oscillators
DESCRIPTION
RoHS Status: RoHS Compliant and pB free
Moisture Sensitivity Level: Level 1 (Infinite) according to
IPC/JEDEC J-STD-020D.1
Operating Temperature Range: -10° to +70°C or -40° to +85°C
Storage Temperature Range: -55° to +125°C
Humidity: 85% RH, 85°C, 48 hours
Fine Leak: MIL-STD-883, method 1014
Condition A
Gross Leak: MIL-STD-883, method 1014
Condition C
Solderability: MIL-STD-202F method 208E
Reflow: 260°C for 10 seconds
Vibration: MIL-STD-202F method 204
35g , 50 to 2000Hz.
Shock: MIL-STD-202F method 213B
test cond. E, 1000g ½ sinewave
Resistance to Solvents: MIL-STD-202, method 215
Temperature Cycling: MIL-STD-883, method 1010
ESD Rating: 2kV max. Human body model
Pad Surface Finish: Gold (Au 0.3%µm min.) over
nickel (N 1.27µm to 8.89µm)
Total Weight: 65mg per unit typical
Page 1 of 2
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk
EURO
QUARTZ
SOLDER TEMPERATURE PROFILE
PART NUMBER FORMAT
3 HC53 D - 32.0 / 120.0
Page 2 of 2
Example: 3HC53D-32.0/120.0
Supply Voltage
3 = 3.3 Volts
25 = 2.5 Volts
18 = 1.8 Volts
Package HC53
Stability over temperature range
15C = ±15ppm over -10° to -70°C
A = ±25ppm over -10° to +70°C
B = ±50ppm over -10° to +70°C
D = ±25ppm over -40° to +85°C
E = ±50ppm over -40° to +85°C
D = ±100ppm over -40° to +85°C
Frequency Output 1 (MHz)
Freqeuency Output 2 (MHz)
5 x 3.2mm SMD Dual Frequency Selectable Oscillator
HC53 Oscillators
