PAGE . 1REV.0.2-MAR.15.2010
1N5400~1N5408
FEATURES
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound.
• High current cap ability
• Low leakage
• Exceeds environmental standards of MIL-S-19500/228
• In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DATA
• Case: DO-201AD Molded plastic
• Lead: Axial leads, solderable per MIL-STD-750,Method 2026
guaranteed
• Polarity: Color band denotes cathode end
• Mounting Position: Any
• Weight: 0.0395 ounces, 1.122 gram
HIGH CURRENT PLASTIC SILICON RECTIFIER
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance from Junction to Ambient and from junction to lead at 0.375”(9.5mm)lead length P.C.B.mounted.
DO-201AD
Unit: inch(mm)
.052(1.3)
.210(5.3)
1.0(25.4)MIN. 1.0(25.4)MIN.
.375(9.5)
.285(7.2)
.048(1.2)
.188(4.8)
VOLTAGE 50 to 1000 Volts CURRENT 3.0 Ampere
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load,derate current by 20%.
PARAMETER SYMBOL
1N5400 1N5401 1N5402 1N5403 1N5404 1N5405 1N5406 1N5407 1N5408
UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 200 300 400 500 600 800 1000 V
Maximum RMS Voltage V
RMS
35 70 140 210 280 350 420 560 700 V
Maximum DC Blocking Voltage V
DC
50 100 200 300 400 500 600 800 1000 V
Maximum Average Forward Current .375"(9.5mm)
lead length I
F(AV)
3.0 A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load(JEDEC method) I
FSM
200 A
Maximum Forward Voltage at 3.0A V
F
1.2 V
Maximum DC Reverse Current at T
J
=25
O
C
Rated DC Blocking Voltage T
J
=100
O
CI
R
5.0
1000 μA
Typical Junction capacitance (Note 1) C
J
30 pF
Typical Thermal Resistance(Note 2) R
θJA
R
θJC
35
15
O
C /
W
Operating Junction and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C