Loose R.41 Taped Fig.1 Y2 / X1 CLASS (IEC 60384-14) MKP Series Fig.2 METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES Typical applications: Interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRODUCT CODE: R41 Note: R.41 series has replaced the R73 series (available only upon request). For new design we suggest the use of the R.41 series. O d 0.05 p = 10 p = 15 15<p27.5 p = 37.5 0.6 0.6 or 0.8* 0.8 1 * See size table. All dimensions are in mm. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 TEST METHOD AND PERFORMANCE GENERAL TECHNICAL DATA Damp heat, steady state: Dielectric: polypropylene film. Test conditions Plates: metal layer deposited by evaporation under vacuum. Temperature: +402C Winding: non-inductive type. Relative humidity (RH): 93 2% Leads: tinned wire. Test duration: 56 days Protection: plastic case, thermosetting resin filled. Box Performance material is solvent resistant and flame retardant according to Dielectric strength: no dielectric breakdown or UL94 V0. flashover at 1500Vac/1 min Marking: Manufacturer's logo, series, capacitance, tolerance, Capacitance change |C/C|: 5% rated voltage, capacitor class, dielectric code, climatic Insulation resistance: 50% of initial limit. category, passive flammability category, manufacturing date Endurance: code, approvals, manufacturing plant. Test conditions Climatic category: 40/110/56 IEC 60068-1 Temperature: 110C2C Test duration: 1000 h Operating temperature range: -40 to+110C Voltage applied: 1.7 x VR + 1000Vac 0.1 s/h Related documents: IEC 60384-14, EN 60384-14. Performance ELECTRICAL CHARACTERISTICS 300Vac / 1000Vdc; 50/60Hz Rated voltage (VR): Capacitance range: 1000pF to 1.0F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Dissipation factor (DF): 20 (15)* at 1kHz tg x 10-4 at +25C 5C: * Typical value Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: +25C5C 1 min 100 Vdc Performance 1 x 105 M (5 x 105 M )* 30000 s (150000 s)* for C 0.33F for C >0.33F Dielectric strength: no dielectric breakdown or flashover at 1500Vac/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 2% APPROVALS (*) * Typical value Test voltage between terminations (on all pieces): 2500Vac for 1 s + 5000Vdc for 1 s at +25C5C ENEC IEC 60384-14 Class Y2 / X1 File No. V4160 CSA C22.2 N1 (250Vac) Across-the-line File No. LR83890 UL 1414 ,( 85C; 250Vac) Across-the-line File No. E 97797 GB IT 14472 Class Y2 / X1 File CQC3001006820 CQC3001006821 Approved according to IEC 60384-14 (ex-former EN 132400) According to IEC 60065. (*) ENEC mark has replaced all the following European National marks: 209 10/2006 R.41 Y2 / X1 CLASS (IEC 60384-14) MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES Typical applications: Interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRODUCT CODE: R41 Rated Cap. 300 Vac/1000Vdc Od Std dimensions L p Max dv/dt at 420Vdc (V/ s) Part Number Table 1 Standard packaging style B H 1000 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1100 - - 00 - 1500 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1150 - - 00 - 2200 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1220 - - 00 - 3300 pF 5.0 11.0 13.0 10.0 0.6 800 R413F 1330 - - 00 - 4700 pF 5.0 11.0 13.0 10.0 0.6 800 R413F 1470 - - M1 - 4700 pF 6.0 12.0 13.0 10.0 0.6 800 R413F 1470 - - 00 - 6800 pF 6.0 12.0 13.0 10.0 0.6 800 R413F 1680 - - 00 - 3300 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1330 - - 00 - 4700 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1470 - - 00 - 6800 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1680 - - 00 - 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R413I 2100 - - 00 - 0.015 F 6.0 12.0 18.0 15.0 0.6 600 R413I 2150 - - 00 - 0.022 F 7.5 13.5 18.0 15.0 0.6 600 R413I 2220 - - 00 - 0.033 F 8.5 14.5 18.0 15.0 0.6 600 R413I 2330 - - 00 - 0.047 F 10.0 16.0 18.0 15.0 0.8 600 R413I 2470 - - 00 - 0.047 F 6.0 15.0 26.5 22.5 0.8 500 R413N 2470 - - 00 - 0.068 F 7.0 16.0 26.5 22.5 0.8 500 R413N 2680 - - 00 - 0.10 F 10.0 18.5 26.5 22.5 0.8 500 R413N 3100 - - 00 - 0.15 F 11.0 20.0 26.5 22.5 0.8 500 R413N 3150 - - 00 - 0.22 F 13.0 22.0 26.5 22.5 0.8 500 R413N 3220 - - 00M 0.22 F 13.0 22.0 32.0 27.5 0.8 400 R413R 3220 - - 00 - 0.33 F 14.0 28.0 32.0 27.5 0.8 400 R413R 3330 - - 00 - 0.47 F 18.0 33.0 32.0 27.5 0.8 400 R413R 3470 - - 00 - 0.68 F 18.0 33.0 32.0 27.5 0.8 400 R413R 3680 - - 00 - 0.47 F 13.0 24.0 41.5 37.5 0.8 300 R413W3470 - - 00 - 0.68 F 16.0 28.5 41.5 37.5 0.8 300 R413W3680 - - 00 - 1.0 F 20.0 40.0 41.5 37.5 0.8 300 R413W4100 - - 00 - Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O 500mm REEL O 500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) Loose, short leads Loose, long leads (p=10mm) Loose, long leads (p15mm) 44 +2 25 1 25 +2/-1 30 +5 00 JY 50 40 Note: Ammo-pack is the preferred packaging for taped version Mechanical version and packaging (Table1) Tolerance: K (10%); M (20%) E12 Series available upon request All dimensions are in mm. 10/2006 Lead length 210