10/2006
209
R.41
Y2 / X1 CLASS (IEC 60384-14) MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: Interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor could lead to danger of electric shock.
PRODUCT CODE: R41
Note: R.41 series has replaced the R73 series (available
only upon request). For new design we suggest the
use of the R.41 series.
GENERAL TECHNICAL DATA
Dielectric: polypropylene fi lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin fi lled. Box
material is solvent resistant and fl ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic
category, passive fl ammability category, manufacturing date
code, approvals, manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to+110°C
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 300Vac / 1000Vdc; 50/60Hz
Capacitance range: 1000pF to 1.0µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Dissipation factor (DF):
tgδ x 10-4 at +25°C ±5°C: ≤20 (15)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
≥1 x 105 MΩ (5 x 105 MΩ )* for C ≤0.33µF
≥30000 s (150000 s)* for C >0.33µF
* Typical value
Test voltage between terminations (on all pieces):
2500Vac for 1 s + 5000Vdc for 1 s at +25°C±5°C
Ø d ±0.05 p = 10 p = 15 15<p≤27.5 p = 37.5
0.6 0.6 or 0.8* 0.8 1
* See size table.
All dimensions are in mm.
Loose Taped
Fig.1 Fig.2
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40±2°C
Relative humidity (RH): 93 ±2%
Test duration: 56 days
Performance
Dielectric strength: no dielectric breakdown or
fl ashover at 1500Vac/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: 110°C±2°C
Test duration: 1000 h
Voltage applied: 1.7 x VR + 1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
fl ashover at 1500Vac/1 min
Capacitance change |∆C/C|: ≤10%
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤2%
APPROVALS
(*)
ENEC
IEC 60384-14 Class Y2 / X1 File No. V4160
CSA C22.2 N°1
(250Vac) Across-the-line File No. LR83890
UL 1414 ,( 85°C;
250Vac) Across-the-line File No. E 97797
GB IT 14472 Class Y2 / X1 File CQC3001006820
CQC3001006821
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065.
(*) ENEC mark has replaced all the following European
National marks:
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3