Series AM1MR-Z 1 Watt | DC-DC Converter FEATURES: * * * * * * * * Regulated Single Output Continuous Short Circuit Protection RoHS Compliant MTBF>3,500,000 hours 1000VDC Isolation Operating temperature: -40C to +85C Industry Standard Pinout 14 Pin DIP Package Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Input Current FL | No Load (mA) Efficiency (%) AM1MR-0503SZ 4.5-5.5 3.3 303 1000 220 363 30 57 AM1MR-0505SZ 4.5-5.5 5 200 1000 220 313 35 65 AM1MR-0507SZ 4.5-5.5 7.2 139 1000 220 312 30 66 AM1MR-0509SZ 4.5-5.5 9 111 1000 220 307 35 67 AM1MR-0512SZ 4.5-5.5 12 83 1000 220 303 35 66 AM1MR-0515SZ 4.5-5.5 15 67 1000 220 303 35 64 AM1MR-1203SZ 10.8-13.2 3.3 303 1000 220 148 20 60 AM1MR-1205SZ 10.8-13.2 5 200 1000 220 130 20 63 AM1MR-1207SZ 10.8-13.2 7.2 139 1000 220 128 20 66 AM1MR-1209SZ 10.8-13.2 9 111 1000 220 126 20 67 AM1MR-1212SZ 10.8-13.2 12 83 1000 220 126 20 66 AM1MR-1215SZ 10.8-13.2 15 67 1000 220 122 20 68 AM1MR-2403SZ 21.6- 26.4 3.3 303 1000 220 74 10 63 AM1MR-2405SZ 21.6- 26.4 5 200 1000 220 66 10 68 AM1MR-2407SZ 21.6- 26.4 7.2 139 1000 220 64 10 68 AM1MR-2409SZ 21.6- 26.4 9 111 1000 220 63 10 69 AM1MR-2412SZ 21.6- 26.4 12 83 1000 220 62 10 68 AM1MR-2415SZ 21.6- 26.4 15 67 1000 220 62 10 66 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal 5 12 24 Filter Absolute Maximum Rating (100 ms) Typical Maximum 4.5- 5.5 10.8-13.2 21.6- 26.4 Capacitor VDC 5 12 24 7 15 28 Input reflected current Units VDC 20 mA Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec At 500VDC Rated Units 1000 VDC MOhm pF >1000 60 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation www.aimtec.com F 051e R9.G Conditions Typical 2 Continuous Auto-Recovery 0.5 LL ~ HL Tel: +1 514 620 2722 1 of 4 Maximum Units % % of Vin Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1MR-Z 1 Watt | DC-DC Converter Output Specifications (continued) Parameters Conditions Load voltage regulation Load voltage regulation (3.3V output) Temperature coefficient Ripple & Noise Typical From 0% to 100% Load From 0% to 100% Load Maximum 0.5 1 0.02 50 20MHz Bandwidth Units % % %/oC mVp-p General Specifications Parameters Conditions Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Typical Maximum Units 50 Full Load KHz oC oC oC -40 to +85 -40 to +125 100 Free Air Convection 95 Non-Conductive Plastic (UL94V-0) 2.7 20.30 x 10.16 x 6.90mm (0.80 x 0.40 x 0.27 inches) >3,500,000hrs dual (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5mm from case for 10 sec 260 % RH g oC Safety Specifications Parameters CE EN 55032, Class B IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 IEC61000-4-8 Also designed to meet IEC 60950-1 Single 1 - V input 7 NC 8 No Pin 9 + V output 10 No Pin 11 - V output 14 + V input NC: No Connection Dimensions Pin 15.24 (0.60) 20.30 (0.80) 0.25 (0.01) Pin Out Specifications 10.16 (0.40) 1 7.62 (0.30) Agency Approvals Safety Standards 14 11 10 9 8 2.54 (0.10) 3.05 (0.12) 6.90 (0.27) Printed Face 0.50 (0.02) 7 Bottom View www.aimtec.com F 051e R9.G Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1MR-Z 1 Watt | DC-DC Converter Radiated and Conducted Emissions Application circuit: C1 L1 470F/100V 12 H Typical Efficiency Chart Examples Eff % AM1MR-0515SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % www.aimtec.com F 051e R9.G Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1MR-Z 1 Watt | DC-DC Converter Eff % AM1MR-1215SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % Eff % AM1MR-2415SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R9.G Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only