EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Bi-Color (Multi-color) Top Views LEDs 67-22/R6BHC-B07/2T Features P-LCC-4 package. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version Descriptions The 67-22 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Type Material Emitted Color AlGaInP Brilliant Red R6 InGaN Blue BH Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 1 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Package Dimensions CL 2 1 4 3 2 Blue 4 1 Red 2.80.2 3 0.70.1 2.20.1 CL 3.20.2 3.50.2 0.150.05 0.80.1 1.90.2 0.50.1 2.40.1 2.80.2 2.70.2 For reflow soldering(propose) 0.80.1 1.6 1.8 0.7 2.2 1.8 Note: The tolerances unless mentioned is 0.1mm;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 2 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF R6 50 BH 25 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +100 R6 2000 V BH 150 V R6 120 BH 110 R6 100 BH 100 Electrostatic ESD Discharge(HBM) Power Dissipation Pd Peak Forward Current(Duty 1/10 @ 1KHz) IFP Soldering Temperature Tsol mW mA Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength IV Typ. Max. R6 90 ----- 225 BH 90 ----- 225 ----- 120 ----- R6 ----- 632 ----- BH ----- 468 ----- R6 621 ----- 631 BH 466.5 ----- 471.5 R6 ----- 20 ----- BH ----- 35 ----- R6 1.75 ----- 2.35 BH 2.9 ----- 3.7 21/2 p Dominant Wavelength d Spectrum Radiation Bandwidth Forward Voltage Min. Symbol VF Reverse Current IR --------Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V 10 Unit Condition mcd deg nm nm IF=20mA nm V A Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu VR=5V Page: 3 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Bin Range Of Luminous Intensity Chip Bin Code Min. Max. Q2 90.0 112 R1 112 140 R2 140 180 S1 180 225 Q2 90.0 112 R1 112 140 R2 140 180 S1 180 Bin Range Of Dominant Wavelength 225 R6 BH Chip Bin Code Unit Condition mcd IF =20mA Min. Max. Unit Condition FF1 621 FF2 626 Bin Range Of Forward Voltage 626 631 nm IF =20mA R6 Chip Bin Code Min. Max. Unit Condition 0 1 2 11 12 13 14 1.75 1.95 2.15 2.90 3.10 3.30 3.50 1.95 2.15 2.35 3.10 3.30 3.50 3.70 V IF =20mA R6 BH Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 4 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Typical Electro-Optical Characteristics Curves(R6) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 5 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Typical Electro-Optical Characteristics Curves(BH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 6 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 7 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. NOTE :TOLERANCES UNLESS DIMENSION 0.1 mm UNIT: mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Label Page: 8 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 min 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA/ 25 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 9 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C . M ax. 10 Sec. M ax. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. M ax. A bove 220C 120 Sec. M ax. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 10 of 11 EVERLIGHT ELECTRONICS CO.,LTD. 67-22/R6BHC-B07/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Device No. :DSE-672-085 Prepared date: 27.Jan.2006 Prepared by: Venis Wu Page: 11 of 11