3.2X1.6mm SMD CHIP LED LAMP APK3216MWC WHITE Features Description !3.2mmX1.6mm SMT LED, 1.1mm THICKNESS. The source color devices are made with GaN on !LOW POWER CONSUMPTION. SiC Light Emitting Diode. !WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. It !IDEAL FOR BACKLIGHT AND INDICATOR. is recommended to use a wrist band or anti- ! VARIOUS COLORS AND LENS TYPES AVAILABLE. electrostatic glove when handling the LEDs. !PACKAGE :2000PCS / REEL. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1154 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN:L.ZHANG PAGE: 1 OF 4 Selection Guide Par t No . Dic e APK3216MWC Iv (m c d ) @ 20m A L en s Ty p e WHITE (GaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 21/2 18 50 90 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25C Sy m b o l Par am et er VF Forward Voltage IR X D ev i c e Ty p . Max . Un it s Tes t Co n d it io n s White 3.8 4.5 V IF = 2 0 m A Reverse Current White - 10 uA VR = 5V Chromaticity Coordinates White 0.33 - - - 0.34 - - - pF V F = 0 V, f = 1 M Hz Y C Capacitance White 100 Absolute Maximum Ratings at T)=25C Par am et er Power dissipation Wh it e Un it s 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1154 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN:L.ZHANG PAGE: 2 OF 4 White APK3216MWC APK3216MWC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. SPEC NO: DSAD1154 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN:L.ZHANG PAGE: 3 OF 4 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1154 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN:L.ZHANG PAGE: 4 OF 4