digital infotainment products PCl Audio/Video Broadcast Decoder CX23880/CX23881 Single-Chip Solution Allows TV, Radio, Digital TV and Broadband Data Capture Over the PCI Bus Conexant's highly-flexible audio and video broadcast decoder supports all analog broadcast video and audio formats in use worldwide. This single-chip solution enables the host PC to perform audio/video capture, video display, audio playback, or storage and playback at a later time through software or hardware audio/video codecs. The CX23880/CX23881 is fully compatible with Conexant's family of digital channel demodulators for capture of (HDTV) High Definition Television and Standard Definition Television (SDTV) streams, as well as broadband data over terrestrial, satellite or cable links. The CX23880 interfaces directly to the CX23490 HDTV hardware decoder for offloading the CPU of high-level MPEG-2 decoding tasks. A variety of third-party peripheral connectivity options are supported by the CX23880/CX23881. Its General Purpose Input/ Output pins and CPU host port interface enable vendor-specific board functionality and marketplace differentiation. Distinguishing Features * 10-bit video decoder * Adaptive comb filter * Global broadcast audio decoder * Stereo DACs Functional Overview * I2S input and output The CX23880/CX23881 video and broadcast audio capture chip * DTV and broadband support is a mixed-signal monolithic ic enabling a new platform for video, audio, and data communications in the PC. The CX23880/CX23881 chips are designed to offer higher integration, functionality and are significantly more flexible and configurable than the previous generation FusionTM 878A. * MPEG encoder and decoder interfaces digital infotainment products PCl Audio/Video Broadcast Decoder CX23880/CX23881 CX23880 Overview Level MPEG-2 decoding for DVB broadcast applications The CX23880 is designed to offer global support is supported via a dedicated MPEG port for streaming for all analog video broadcast standards in of compressed data streams to the host for software- addition to digital broadcasts via an external channel based decompression. demodulator. It is also designed to offload the CPU of decoding tasks for High Level MPEG-2 (HDTV), Both the CX23880 and CX23881 support a general 4:2:2 de-interlacing and progressive-scan DVD via purpose host port for connection to external CODECs a dedicated ViP 2 Host Port interface to the CX23490 for compression of analog video/audio broadcasts high-level MPEG-2 Decoder. that can be stored on the host's hard disk or played back in software. CX23881 Overview The CX23881 is a 100% pin-compatible and software- Analog Video Capture Overview compatible subset of the CX23880. It is particularly The CX23880/CX23881 integrates a 10-bit NTSC/ suited to the European marketplace and therefore PAL/SECAM composite and s-video decoder, image does not support BTSC-dBX and EIAJ audio as resizer/scaler, Direct Memory Access (DMA) controller broadcast in the U.S. and Japan. In addition, the ViP and Peripheral Component Interface (PCI) bus host port is not supported on the CX23881 as there is master on a single device. The CX23880/CX23881 no requirement for supporting high-level MPEG-2 can place video data directly into host memory for decoding for digital television applications. Main video capture applications and into a target video display frame buffer for video overlay applications. Fusion 878A CX23880 CX23881 8-bit 10-bit 10-bit Luma Notch and Chroma Comb Adaptive multi-line 2-D comb filter Adaptive multi-line 2-D comb filter Decoded video data output Via GPIO 8- or 10-bit ITU-R 656 4:2:2 output 8- or 10-bit ITU-R 656 4:2:2 output Video data input Via GPIO 8-bit ITU-R 656/VIP 2.0 pixel input 8-bit ITU-R 656/VIP 2.0 pixel input Broadcast audio BTSC Mono BTSC dbx, NICAM, A2, EIAJ, FM NICAM, A2, FM Mono line level or I2 S port Stereo I2 S port Stereo I2 S port N/A Stereo DACs, I2 S port or PCI Bus Stereo DACs, I2 S port or PCI Bus I2 S port Dedicated 80 Mbps MPEG port Dedicated 80 Mbps MPEG port Bi-directional streaming data ports N/A Intel/Motorola host port and VIP 2.0 host master port Intel/Motorola host port only Power supply 5V 3.3/1.8V 3.3/1.8V Feature Video A/Ds Y/C separation Audio input Audio output MPEG data streaming CX23880 block diagram As a PCI initiator, the CX23880/CX23881 can take control Video Input of the PCI bus to stream data as soon as the bus is available, Analog video signals are input to the CX23880/CX23881 via thereby avoiding the need for on-board frame buffers. a four-input multiplexer. The multiplexer can select between The CX23880/CX23881 contains a pixel data First In, First Out four composite source inputs or between three composite and (FIFO) to decouple the high-speed PCI bus from the continuous a single s-video input source. When an s-video source is input video data stream. The video data input may be scaled, color to the CX23880/CX23881, the luma component is fed through translated, and burst-transferred to a target location on a field the input analog multiplexer, and the chroma component basis. This allows for simultaneous preview of one field and feeds directly into the C-input pin. An Automatic Gain Control capture of the other field. Alternatively, the CX23880/CX23881 (AGC) circuit enables the CX23880/CX23881 to compensate is able to capture or preview both fields simultaneously. for non-standard amplitudes in the analog signal input. The fields may be interlaced into memory or sent to separate field buffers. digital infotainment products Reduced Instruction Set Computing (RISC) Engine frame output mode in which every line in the video frame The CX23880/CX23881 enables separate destinations for is treated as if it were a VBI line. This mode of operation is the odd and even video fields, each controlled by a pixel designed for use with still-frame capture and processing RISC instruction list. This instruction list is created by the applications, where sophisticated image decoding can be CX23880/CX23881 device driver and may be run in the performed in the software domain. on-chip memory or host memory. The instructions control the transfer of pixels to target memory locations on a byte Macrovision(R) Detector resolution basis. Complex clipping can be accomplished by With the advent of more powerful CPUs that enable the instruction list, blocking the generation of PCI bus cycles software-based video compression, low-cost hardware for pixels that are not to be seen on the display. MPEG encoders, cheap and rewritable storage media, and pervasive broadband communications, original content The DMA channels can be programmed on a field basis to protection is paramount. To this end, the CX23880/CX23881 deliver the video data in packed or planar format. In packed fully implements Macrovision 7.01 detection. When an end- mode, YCrCb data is stored in a single continuous block of user attempts to connect a digital video disk (DVD) player, memory. In planar mode, the YCrCb data is separated into a digital satellite/cable decoder's composite, or s-video out- three streams which are burst to different target memory puts to the input of a CX23880/ CX23881-based PCI card, blocks. Having the video data in planar format is useful for Macrovision pulses and signals are detected, and appropriate applications where data compression is accomplished via flag bits are set. It is up to the board vendor to read the flag software and the CPU. bits and determine what action will be taken. UltraLockTM Analog Audio Capture The CX23880/CX23881 employs a proprietary technique The CX23880/CX23881 captures and decodes all major known as UltraLock to lock on to the incoming analog video terrestrial broadcast audio standards. The CX23880/CX23881 signal. It consistently generates the required number of digitizes and oversamples the low intermediate frequency pixels per line from an analog source in which line length (IF) signal from a TV tuner, and extracts and decodes the can vary by as much as a few microseconds. UltraLock's broadcast audio signal. The decoded audio is sample rate digital locking circuitry enables the CX23880/CX23881 to converted to a 48 KHz pulse code modulation (PCM) stereo lock onto video signals quickly and accurately, regardless signal to simplify processing and interfacing. This 48 KHz of their source. The technique is completely digital, so stream can be routed to the built-in (90 dB Signal-to-Noise UltraLock can recognize unstable signals caused by Ratio (SNR) stereo audio Digital-to-Analog Converters VCR head switches or any other deviation and can adapt (DACs) for connection to the PC's sound card or headphones, the locking mechanism to accommodate the source. to an external Digital-Audio Interface, or to the PCI bus and UltraLock uses nonlinear techniques that are difficult, host for direct capture by a software audio codec. The if not impossible, to implement in genlock systems. CX23881 only supports NICAM, A2 and FM broadcast audio Unlike linear techniques, it adapts the locking mechanism standards primarily for the European marketplace. automatically. If capture of line-level stereo audio signals is required, an Vertical Blanking Interval (VBI) Data Capture inexpensive audio analog-to-digital converter A/D may The CX23880/CX23881 provides a flexible solution for be directly connected to the CX23880/CX23881's I 2S input capturing and decoding disparate VBI data types such as port and controlled via the serial bus master. closed-caption data, teletext, vertical internal time and control (VITC) codes, HTML data, or multicast data. The CX23880/CX23881 can operate in a VBI line output mode, in which the VBI data is only captured from selected lines. This mode of operation enables concurrent capture of VBI lines containing ancillary data and normal video image data. In addition, the CX23880/CX23881 supports a VBI ITU-R 656 4:2:2 Data Output What is a Broadcast Decoder? The CX23880/CX23881 provides a 27 MHz, 8- or 10-bit ITU-R 656 decoded video output interface to allow connection of a third-party MPEG-2 encoder or other type A broadcast decoder is designed to capture and decode the video and audio portions of any analog TV broadcast of video codec. This is useful when the host CPU is not powerful enough to perform such tasks in software, or signal. In addition, a broadcast decoder must be able to when high-quality encoding must be achieved. Please contact Conexant Application Engineering for a list of supported third-party video compressors. ITU-R 656/VIP 2.0 Pixel Data Input address the transition to all-digital broadcasting by offering a variety of methods to connect to digital TV channel demodulators. Sufficient I/O must be provided to support The CX23880/CX23881 provides a 27 MHz, 8-bit ITU-R 656 decoded video input interface to allow a third-party MPEG-2 decoder or codec to send 4:2:2 data over the PCI bus to external hardware-based compression of analog video/audio signals in order to enable storage onto hard disks or CDROM. a target video display frame buffer for video overlay. Alternatively, 480-line progressive scan video from the CX23490 all-format MPEG-2 decoder may be input to this port using Video Interface Port (VIP) 2.0-compliant pixel timing at up to 54 MHz. Conexant's broadcast decoder meets these objectives in the following way: 1) It captures and decodes all variations of NTSC, PAL Antenna Ant1 and SECAM video standards into digital RGB or YUV Tuner Ant2 CVBS C Composite or S-Video In Stereo Audio Out Serial Data pixel streams. 2nd IF Cable Y Serial Bus 2) It captures and decodes all broadcast audio standards used worldwide such as BTSC/DBX, NICAM, A2, EIAJ C Y and FM/AM, into 48 KHz PCM streams or stereo left L and right audio signals. R 3) It facilitates "analog to MPEG" conversion by providing an 8- or 10-bit ITU-R 656 pixel interface to an external MPEG 2 encoder for real-time compression. Providing PCI BUS a streaming host port or MPEG port for DMA of compressed data to the host or hard disk. TV/FM block diagram 4) It provides a dedicated high-speed streaming MPEG TV/FM application example Features: * Single-chip capture/record of broadcast TV and radio to PC port that is compatible with ATSC, DVB and ISDB digital television channel demodulators for DMA to the host * Global video standards support * Global audio standards support including FM/AM radio * Many I/O ports to differentiate design or hard disk. digital infotainment products MPEG Data Port GPIO Port Channel demodulators used for digital TV or broadband The CX23880/CX23881 provides up to 24 GPIO pins. These data applications over terrestrial, satellite, or cable GPIO pins are shared with the following pins/ports groups networks may be directly connected to the CX23880/CX23881's so that the user can determine exactly which pins can be MPEG data port to deliver transport streams to the host for dedicated to specific functions versus GPIO functions: subsequent storage to disk or software decode. Either parallel * MPEG parallel data port Digital Video Broadcasting (DVB) (common interface) or * ITU-R 656 4:2:2 data output serial data paths from the channel demodulator may be * ITU-R 656 4:2:2 data input supported at data transfer rates of up to 80 Mbps. If the * Extended VIP host port serial interface mode is used, then the remaining unused pins on this port may be allocated as GPIO. Serial Bus Interface The CX23880/CX23881's serial bus interface supports both VIP 2.0 Host-Master Interface Port (CX23880 only) 99.2 KHz timing transactions and 396.8 kHz, repeated start, The VIP 2.0 host-master interface allows the CX23880 to multibyte sequential transactions. As a serial bus master, communicate with all devices that are compliant with the the CX23880/CX23881 can program other devices on the VIP slave specification. This implementation of a VIP 2.0 video card, such as a TV tuner, as long as the device master is backwards-compatible with all VIP 1.1-compliant address is known. The CX23880/CX23881 supports slave interfaces. The CX23880 is designed to connect to the multibyte sequential reads (more than one transaction) CX23490 all-format MPEG-2 decoder via this interface. The and multibyte write transactions (greater than three functionality of the VIP host-master interface is threefold. transactions), which enable communication to devices The first concept is to stream data from a VIP slave into that support auto-incremental internal addressing. host memory via the PCI bus. The second concept is to stream out data to a VIP slave that is sent over the PCI bus PCI Bus Interface from the host. The third concept is for the host to be able The CX23880/CX23881 is designed to efficiently utilize the to access register space on connected VIP slave devices. available 132 Mbps PCI bus. The 32-bit words are output The CX23881 does not support the VIP 2.0 host master on the PCI bus with the appropriate image data under the interface port and in order to retain pin compatability with control of the DMA channels. The video stream consumes the CX23880, these pins are configured as GPIO. bus bandwidth with average data rates varying from 44 Mbps for full-size 768 x 576 PAL RGB32, to 4.6 Mbps for General Purpose Host Interface Port NTSC CIF 320 x 240 RGB16, to 0.14 Mbps for NTSC ICON The general purpose host interface allows the 80 x 60 8-bit mode. connection of moderate to relatively slow-speed third-party peripherals (such as infrared remote control processors, The pixel instruction stream for the DMA channels codec host ports, smart card controllers, etc.), to the consumes a minimum of 0.1 Mbps. The CX23880/CX23881 CX23880/CX23881. This port allows simultaneous provides the means for handling the bandwidth bottle- connection to two peripherals glue free, or as many as necks caused by slow targets and long bus access four peripherals with the use of external glue logic to latencies that can occur in some system configurations. provide the additional chip selects. This interface may have To overcome these system bottlenecks, the CX23880 one upstream and one downstream DMA channel active gracefully degrades and recovers from FIFO overruns to or from the external peripherals at any given time. to the nearest pixel in real time. SPDIF Driver TS OUT 656 IN VIP_HOST MPEG C Composite or S-Video In 656 Out Y Serial Bus C Mux VIP_HOST Y 12 S_IN I2S_OUT Stereo Audio Out L 656/480P In R PCI BUS DVD HARD DISK HD-Theater block diagram HD-Theater application example Features: * ATSC high-definition TV decoding * 480P/ 720P/1080i output resolution from HDTV or DVD sources * 5.1 Dolby DigitalTM, Pro-LogicTM and down-mixed 2.0 audio * NTSC up-conversion and de-interlacing to 480P/ 720P/1080i * Virtual surround spatialization for analog broadcast audio * Record HD programs to disk CX25871 VGA/RGB/YPrPb/NTSC Output I 2 S_OUT ADC CX23490 TS IN PRI_OUT VSB Serial Data CVBS Ant2 2nd IF Cable TV Tuner Digital Channel Demod SEC_OUT Ant1 I2S_IN Antenna SDRAM SDRAM 5.1 SP/DIF Out features TV Tuner C MPEG I2S_OUT MPEG-2 Encoder Serial Data 2nd IF Ant2 Y Serial Bus Host Port C Composite or S-Video In specifications 656 Out Ant1 Cable CVBS Antenna and Features: Y * Compresses broadcast video (ITU-R 656) L Stereo Audio Out Digital VCR application example and broadcast audio (PCM) to MPEG PS/ES R * Allows real-time video preview in a window * Simultaneous "watch and record" with VGA overlay * Time-shift television programs PCI BUS HARD DISK Digital VCR block diagram Product Features Video Subsystem Features * 10-bit video A/D * Global video standards support [NTSC (M, J, 4.43), PAL (B, D, G, H, I, M, N, N-combination), SECAM (K, L)] * Capture resolution up to 768 x 576 (square pixel PAL/SECAM) * NTSC and PAL adaptive comb filter for 2-D Y/C luminance and chrominance separation * AGC video circuit * Multiple YCrCb and RGB pixel formats and YUV planar formats supported on output * Selectable pixel density: 8, 16, 24 and 32-bits per pixel * Performs complex clipping of video source and VGA video overlay * Permits different program control and color space/scaling for even and odd fields * Supports Windows(R) "Scatter/Gather" DMA * High-quality multi-tap horizontal and vertical image scaler for decoded video or 4:2:2 sources * ITU-R BT.656 8-bit or 10-bit 4:2:2 output port for MPEG-2 encoder connection * ITU-R BT.656/VIP 2.0 pixel input port for MPEG-2 ML or HL decoder connection * Flexible VBI data capture for closed captioning, teletext, other analog broadcast data types * Hue, brightness, contrast, saturation control for video decoder Audio Subsystem * Low IF sampling direct from tuner * CX23880: Global broadcast audio support (BTSC-DBX, NICAM, A2, EIAJ, FM) * CX23881: European broadcast audio support (NICAM, A2, FM) * Decoded 48 KHz audio stream to PCI bus for real-time encoding to MP3 * Integrated 90 dB SNR stereo audio DACs to drive sound card or headphones * I2S Input port for external source connectivity to on-board stereo DACs * I2S Output port to drive coaxial/optical digital audio interface * Flexible audio sample rate converter Fusion is a trademark of Conexant Systems, Inc. www.conexant.com (c) 2001, Conexant Systems, Inc. All Rights Reserved. General Information: Conexant and the Conexant logo are trademarks of Conexant Systems, Inc. Other trademarks are U.S. and Canada: (800) 854-8099 owned by their respective owners. Although Conexant International: (949) 483-6996 strives for accuracy in all its publications, this material Headquarters - Newport Beach may contain errors or omissions and is subject to change without notice. THIS MATERIAL IS PROVIDED AS IS 4311 Jamboree Rd, P.O. Box C AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, Newport Beach, CA 92660-3007 INCLUDING MERCHANTABILITY, FITNESS FOR A PARTICULAR Order# 101550B 01-0844 PURPOSE AND NON-INFRINGEMENT. Conexant shall not be liable for any special, indirect, incidental or consequential damages as a result of its use. Multipurpose I/O Subsystem Miscellaneous * Bi-directional 33 Mbps VIP 2.0 host port. Comapatible with the CX23490 all-format MPEG-2 decoder (CX23880 only) * Bi-directional 10 Mbps Intel/Motorola-compatible general purpose host port * Unidirectional 10 Mbps parallel/serial MPEG transport/data stream port. Compatible with all Conexant digital television channel demodulator ICs * MPEG packet synchronization * User-defined general purpose input/output pins * ACPI and power-down support * Requires only one crystal for all video and audio decoding * 400 KHz serial bus master * JTAG boundary scan interface * Compact 176-pin TQFP * Low power PCI Subsystem * 5 independent functions each with target/master and local register space (video, audio, MPEG port, VIP 2.0 host port, GP host port) * All RISC/control programs executed on chip * On-chip SRAM for PCI data buffering up/down * Vital product data * DMA byte alignment * PCI revision 2.2 compliant Applications * * * * * * * * * * PC TV PC TV Digital television Digital VCR Analog and digital video editing MP3 radio PCI cable modem PCI satellite modem Data broadcast receiver Media hub for home server