INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: * The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications * The IC06 74HC/HCT/HCU/HCMOS Logic Package Information * The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT4543 BCD to 7-segment latch/decoder/driver for LCDs Product specification File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 four address inputs (D0 to D3), an active HIGH latch disable input (LD), an active HIGH blanking input (BI), an active HIGH phase input (PH) and seven buffered segment outputs (Qa to Qg). FEATURES * Latch storage of BCD inputs * Blanking inputs * Output capability: non-standard The "4543" provides the function of a 4-bit storage latch and an 8-4-2-1 BCD to 7-segment decoder driver. The "4543" can invert the logic levels of the output combination. The phase (PH), blanking (BI) and latch disable (LD) inputs are used to reverse the function table phase, blank the display and store a BCD code, respectively. * ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT4543 are high-speed Si-gate CMOS devices and are pin compatible with "4543" of the "4000B" series. They are specified in compliance with JEDEC standard no. 7A. For liquid crystal displays a square-wave is applied to PH and the electrical common back-plane of the display. The outputs of the "4543" are directly connected to the segments of the liquid crystal. The 74HC/HCT4543 are BCD to 7-segment latch/decoder/drivers for liquid crystal displays. They have QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf = 6 ns TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC tPHL/ tPLH propagation delay HCT CL = 15 pF; VCC = 5 V Dn to Qn 29 33 ns LD to Qn 32 31 ns BI to Qn 20 28 ns 3.5 3.5 pF 42 42 pF CI input capacitance CPD power dissipation capacitance per package notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi + (CL x VCC2 x fo) where: fi = input frequency in MHz fo = output frequency in MHz (CL x VCC2 x fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC -1.5 V ORDERING INFORMATION See "74HC/HCT/HCU/HCMOS Logic Package Information". December 1990 2 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1 LD latch disable input (active HIGH) 5, 3, 2, 4 D0 to D3 address (data) inputs 6 PH phase input (active HIGH) 7 BI blanking input (active HIGH) 8 GND ground (0 V) 9, 10, 11, 12, 13, 15, 14 Qa to Qg segment outputs 16 VCC positive supply voltage Fig.1 Pin configuration. December 1990 Fig.2 Logic symbol. 3 Fig.3 IEC logic symbol. Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 APPLICATIONS * Driving LCD displays * Driving fluorescent displays * Driving incandescent displays * Driving gas discharge displays Fig.4 Functional diagram. Fig.5 Segment designation. FUNCTION TABLE INPUTS LD PH(1) BI OUTPUTS D3 D2 D1 D0 Qa Qb Qc Qd DISPLAY Qe Qf Qg X H L X X X X L L L L L L L blank H H H H L L L L L L L L L L L L L L L L L L H H L H L H H L H H H H H H H H L H H L H H H L H L H L L L L L H H 0 1 2 3 H H H H L L L L L L L L L L L L H H H H L L H H L H L H L H H H H L L H H H H H L H H L L L H L H H H L H H H L 4 5 6 7 H H H H L L L L L L L L H H H H L L L L L L H H L H L H H H L L H H L L H H L L H H L L H L L L H H L L H H L L 8 9 blank blank H H H H L L L L L L L L H H H H H H H H L L H H L H L H L L L L L L L L L L L L L L L L L L L L L L L L L L L L blank blank blank blank L L L X X X X as above H (1) as above inverse of above Notes 1. For liquid crystal displays, apply a square-wave to PH. 2. Depends upon the BCD-code previously applied when LD = HIGH. H = HIGH voltage level L = LOW voltage level X = don't care December 1990 4 (1) as above Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 Fig.6 Logic diagram. Fig.7 Display. RATINGS Limiting values in accordance with the Absolute Maximum System (IEC 134). For RATINGS see "74HC/HCT/HCU/HCMOS Logic Family Specifications", standard outputs. December 1990 5 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 DC CHARACTERISTICS FOR 74HC Output capability: non-standard ICC category: MSI Voltages are referenced to GND (ground = 0 V) Tamb (C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 min. typ. -40 to +85 max. min. VIH HIGH level input voltage 1.5 1.2 3.15 2.4 4.2 3.1 VIL LOW level input voltage 0.7 1.8 2.8 VOH HIGH level output voltage 1.9 4.4 5.9 VOH HIGH level output voltage 3.98 0.15 5.48 0.16 VOL LOW level output voltage 0 0 0 VOL LOW level output voltage 0.15 0.26 0.16 0.26 II input leakage current ICC quiescent supply current December 1990 max. 1.5 3.15 4.2 0.5 1.35 1.8 2.0 4.5 6.0 -40 to +125 UNIT VCC (V) VI OTHER min. max. 1.5 3.15 4.2 0.5 1.35 1.8 0.5 1.35 1.8 V 2.0 4.5 6.0 V 2.0 4.5 6.0 1.9 4.4 5.9 1.9 4.4 5.9 V 2.0 4.5 6.0 VIH or VIL -IO = 20 A -IO = 20 A -IO = 20 A 3.84 5.34 3.7 5.2 V 4.5 6.0 VIH or VIL -IO = 1.0 mA -IO = 1.3 mA 0.1 0.1 0.1 0.1 0.1 0.1 V 2.0 4.5 6.0 VIH or VIL IO = 20 A IO = 20 A IO = 20 A 0.33 0.33 0.4 0.4 V 4.5 6.0 VIH or VIL IO = 1.0 mA IO = 1.3 mA 0.1 1.0 1.0 A 6.0 VCC or GND 8.0 80.0 160.0 A 6.0 VCC IO = 0 or GND 0.1 0.1 0.1 6 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 -40 to +85 -40 to +125 UNIT V CC (V) OTHER min. typ. max. min. max. min. max. tPHL/ tPLH propagation delay Dn to Qn 91 33 26 340 68 58 425 85 72 510 102 87 ns 2.0 4.5 6.0 Fig.12 tPHL/ tPLH propagation delay LD to Qn 102 37 30 370 74 63 465 93 79 555 111 94 ns 2.0 4.5 6.0 Fig.13 tPHL/ tPLH propagation delay BI to Qn 66 24 19 265 53 45 330 66 56 400 80 68 ns 2.0 4.5 6.0 Fig.14 tPHL/ tPLH propagation delay PH to Qn 55 20 16 200 40 34 250 50 43 300 60 51 ns 2.0 4.5 6.0 tTHL/ tTLH output transition time 63 23 18 250 50 43 315 63 54 375 75 64 ns 2.0 4.5 6.0 Figs 12, 13 and 14 tW LD pulse width HIGH or LOW 35 7 6 11 4 3 45 9 8 55 11 9 ns 2.0 4.5 6.0 Fig.13 tsu set-up time Dn to LD 60 12 10 8 3 2 75 15 13 90 18 15 ns 2.0 4.5 6.0 Fig.15 th hold time Dn to LD 30 6 5 3 1 1 40 8 7 45 9 8 ns 2.0 4.5 6.0 Fig.15 December 1990 7 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 DC CHARACTERISTICS FOR 74HCT Output capability: non-standard ICC category: MSI Voltages are referenced to GND (ground = 0 V) Tamb (C) TEST CONDITIONS 74HCT SYMBOL PARAMETER +25 min. HIGH level input voltage 1.6 VIL LOW level input voltage VOH HIGH level output voltage 4.4 4.5 4.4 VOH HIGH level output voltage 3.98 4.32 3.84 VOL LOW level output voltage 0 0.1 0.1 VOL LOW level output voltage 0.15 0.26 II input leakage current ICC quiescent supply current ICC additional quiescent supply current per input pin for unit load coefficient is 1 (note 1) 1.2 100 -40 to +125 UNIT V CC (V) VI OTHER max. min. max. min. max. VIH December 1990 2.0 typ. -40 to +85 2.0 2.0 V 4.5 to 5.5 V 4.5 to 5.5 4.4 V 4.5 VIH or VIL -IO = 20 A 3.7 V 4.5 VIH or VIL -IO = 1.0 mA 0.1 V 4.5 VIH or VIL IO = 20 A 0.33 0.4 V 4.5 VIH or VIL IO = 1.0 mA 0.1 1.0 1.0 A 5.5 VCC or GND 8.0 80.0 160.0 A 5.5 VCC or GND 360 450 490 A 4.5 to 5.5 VCC other inputs -2.1V at VCC or 0.8 0.8 8 0.8 IO = 0 GND; IO = 0 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 Note to HCT types The value of additional quiescent supply current (ICC) for a unit load of 1 is given here. To determine ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT D0, D1, D2 D3 BI LD PH 1.00 0.50 0.50 1.50 1.25 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HCT SYMBOL PARAMETER +25 -40 to +85 -40 to +125 UNIT V CC (V) OTHER min. typ. max. min. max. min. max. tPHL/ tPLH propagation delay Dn to Qn 38 80 100 120 ns 4.5 Fig.12 tPHL/ tPLH propagation delay LD to Qn 36 68 85 102 ns 4.5 Fig.13 tPHL/ tPLH propagation delay BI to Qn 32 66 83 99 ns 4.5 Fig.14 tPHL/ tPLH propagation delay PH to Qn 24 66 83 99 ns 4.5 tTHL/ tTLH output transition time 23 50 63 75 ns 4.5 Figs 12, 13 and 14 tW LD pulse width HIGH or LOW 10 4 13 15 ns 4.5 Fig.13 tsu set-up time Dn to LD 12 4 15 18 ns 4.5 Fig.15 th hold time Dn to LD 8 2 10 12 ns 4.5 Fig.15 December 1990 9 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 APPLICATION DIAGRAMS Fig.8 Fig.9 Connection to liquid crystal (LCD) display readout. Fig.10 Connection to gas discharge display readout. December 1990 Connection to incandescent display readout. Fig.11 Connection to fluorescent display readout. 10 Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver for LCDs 74HC/HCT4543 AC WAVEFORMS (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.12 Waveforms showing the address input (Dn) to output (Qn) propagation delays and the output transition times. Fig.13 Waveforms showing the latch disable input (LD) to output (Qn) propagation delays and the output transition times. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.15 Waveforms showing the address (Dn) to latch disable (LD) input set-up and hold times. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. PACKAGE OUTLINES Fig.14 Waveforms showing the blanking (BI) to output (Qn) propagation delays and the output transition times. December 1990 See "74HC/HCT/HCU/HCMOS Logic Package Outlines". 11