VSMY12940 www.vishay.com Vishay Semiconductors High Speed Infrared Emitting Diodes, 940 nm, Surface Emitter Technology FEATURES * Package type: surface mount * Package form: top view * Dimensions (L x W x H in mm): 3.2 x 1.6 x 1.1 * Peak wavelength: p = 940 nm * High reliability * High radiant power * Very high radiant intensity * Angle of half intensity: = 40 * Suitable for high pulse current operation DESCRIPTION * Floor life: 168 h, MSL 3, according to J-STD-020 As part of the SurfLightTM portfolio, the VSMY12940 is an infrared, 940 nm, top looking emitting diode based on GaAlAs surface emitter chip technology with extreme high radiant intensities, high optical power and high speed, molded in clear, untinted PCB based package (with inner lens) for surface mounting (SMD). * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * Emitter for proximity applications * IR touch panels * Photointerrupters * Optical switch PRODUCT SUMMARY COMPONENT Ie (mW/sr) (deg) p (nm) tr (ns) 16 40 940 10 VSMY12940 Note * Test conditions see table "Basic Characteristics" ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VSMY12940 Tape and reel MOQ: 3000 pcs, 3000 pcs/reel Top view Note * MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) SYMBOL VALUE Reverse voltage PARAMETER VR 5 V Forward current IF 70 mA Surge forward current TEST CONDITION tp = 100 s Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Rev. 1.0, 19-Mar-15 UNIT IFSM 1 A PV 140 mW Tj 100 C Tamb -40 to +85 C C Tstg -40 to +100 acc. figure 10, J-STD-020 Tsd 260 C J-STD-051, soldered on PCB RthJA 390 K/W Document Number: 84233 1 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY12940 www.vishay.com Vishay Semiconductors 80 IF - Forward Current (mA) PV - Power Dissipation (mW) 140 120 100 80 60 RthJA = 390 K/W 40 20 0 70 60 50 40 30 RthJA = 390 K/W 20 10 0 0 20 40 60 80 100 0 Tamb - Ambient Temperature (C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 2 - Forward Current Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER Forward voltage Temperature coefficient of VF Reverse current Junction capacitance Radiant intensity Radiant power Temperature coefficient of radiant power Angle of half intensity Peak wavelength Spectral bandwidth Temperature coefficient of p Rise time Fall time TEST CONDITION IF = 20 mA, tp = 20 ms IF = 70 mA, tp = 20 ms IF = 1 A, tp = 100 s IF = 20 mA VR = 0 V, f = 1 MHz, E = 0 mW/cm2 IF = 20 mA, tp = 20 ms IF = 70 mA, tp = 20 ms IF = 1 A, tp = 100 s IF = 70 mA, tp = 20 ms SYMBOL VF VF VF TKVF IR CJ Ie Ie Ie e MIN. 1.1 TYP. MAX. 1.4 1.9 1.6 2.8 -1.7 not designed for reverse operation 5 2.3 4.7 16 130 40 UNIT V V V mV/K A pF mW/sr mW/sr mW/sr mW IF = 20 mA TKe -0.19 %/K IF = 20 mA IF = 20 mA IF = 20 mA IF = 100 mA, 20 % to 80 % IF = 100 mA, 20 % to 80 % p TKp tr tf 920 40 940 35 0.25 10 10 deg nm nm nm/K ns ns 960 BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) tp = 100 s 100 10 1 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 VF - Forward Voltage (V) Fig. 3 - Forward Current vs. Forward Voltage Rev. 1.0, 19-Mar-15 VF - Forward Voltage (V) IF - Forward Current (mA) 1000 1.80 1.75 1.70 1.65 1.60 1.55 1.50 1.45 1.40 1.35 1.30 1.25 1.20 IF = 20 mA -60 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 4 - Forward Voltage vs. Ambient Temperature Document Number: 84233 2 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY12940 Vishay Semiconductors 115 100 Ie, rel - Relative Radiant Intensity (%) IF = 20 mA tp = 20 ms 110 105 100 95 90 -60 -40 -20 0 20 40 60 80 80 70 60 50 40 30 20 10 0 800 100 IF = 20 mA 90 850 900 950 1000 Tamb - Ambient Temperature (C) Fig. 5 - Relative Forward Voltage vs. Ambient Temperature Fig. 8 - Relative Radiant Intensity vs. Wavelength 0 10 Ie, rel - Relative Radiant Intensity 1000 Ie - Radiant Intensity (mW/sr) 1050 - Wavelength (nm) tp = 100 s 100 10 1 20 30 40 1.0 0.9 50 0.8 60 70 0.7 80 - Angular Displacement VF, rel - Relative Forward Voltage (%) www.vishay.com 0.1 1 10 100 1000 0.4 0.2 0 - Wavelength (nm) IF - Forward Current (mA) Fig. 6 - Radiant Intensity vs. Forward Current Ie, rel - Relative Radiant Intensity (%) 0.6 Fig. 9 - Relative Radiant Intensity vs. Angular Displacement 110 IF = 20 mA tp = 20 ms 105 100 95 90 85 80 -60 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 7 - Relative Radiant Intensity vs. Ambient Temperature Rev. 1.0, 19-Mar-15 Document Number: 84233 3 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY12940 www.vishay.com Vishay Semiconductors SOLDER PROFILE DRYPACK Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. FLOOR LIFE Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 168 h Conditions: Tamb < 30 C, RH < 60 % Moisture sensitivity level 3, according to J-STD-020. DRYING Fig. 10 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 C (+ 5 C), RH < 5 %. PACKAGE DIMENSIONS in millimeters: VSMY12940 Recommended Solder Pad Rev. 1.0, 19-Mar-15 Document Number: 84233 4 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY12940 www.vishay.com Vishay Semiconductors TAPING AND REEL DIMENSIONS in millimeters: VSMY12940 Rev. 1.0, 19-Mar-15 Document Number: 84233 5 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VSMY12940