DFR0513 - DFRobot - Datasheet.Live

HOME COMMUNITY WIKI BLOG





LOGIN/SIGN UP



WISH LIST (0)



Home / PPM 2x3A DC Motor Driver

Frequently Bought Together

PPM 2x3A DC Motor Driv



You have choosen:1

Total amount:

BUY NOW

 

motor drive PPM model airplane

fighting robot PPM motor drive model drive

Servo / Motor Gravity

Tags:

All Products Motors & Actuators & Drivers

DC Motor Drivers Modules

Related Categories

PPM 2x3A DC Motor Driver

SKU:DFR0513 Brand:DFRobot

Reward Points:15

ADD TO WISHLIST

TT Geared Motor with

Back Shaf……



Metal DC Geared Motor -

12V 50……



Metal DC Geared Motor -

12V 10……

INTRODUCTION

This motor driver module is a special PPM signal motor controller for Aero modelling remote control. It is designed by DFRobot

and it can be controlled by RC transmitter. The driver can convert PPM signal to the motor speed and direction control signal.

There are two signal receiving channels (CH1, CH2) and two motor channels (M1, M2) on the board. Each signal input channel

uses a standard 50-Hz PPM signal with a duty cycle of 5% to 10%. When the rocker returns to the middle, the motor stops rotating,

waggling the rocker up and down (or left and right), and the motor rotates forward or backward.

The motor driver supports 7 ~ 12V wide range power input, the maximum input voltage is 40V, and the continuous current of each

channel is 3A, the allowable peak current is 6A. When the current is over 6A, the driver chip will be into a protected state (in the

protection state, it requires repower to start again). The module has LDO power management system, which can provide an output

current of 5V/200mA externally. Therefore, the remote control receiver of the model can be directly connected to the driver board

without additional power supply to the receiver.

FEATURES

2-way independent motor drive

Controlled by PPM signal, compatible with servo control signal

Designed for aeromodelling and fighting robots

Support professional aircraft model remote control

7~12V wide input range

With overload protection

SPECIFICATION

Input Voltage: 7~12V

Logic Power: 5V (compatible with 3.3V controller)

Master Chip: STM8S105

Driver Chip: TLE5205

Drive Signal: 1000~1469us Forward decrement

1470~1560us stop domain

1561~2000us reverse increase

3A current continuous drive capability

6A peak current protection

Supports independent two-channel motor drive

Your email address



Like us on

INFORMATION

About Us

Warranty

Shipping

Payment

FAQ

CUSTOMER SERVICE

DFRobot Distributors

Site Map

MY ACCOUNT

Affiliates

Specials

Dimension: 90mm×30mm

Weight: 35 g

DOCUMENTS

Product wiki