Peel-A-Way®DIP Socket Terminal Carriers
DIP Sockets
5 Energy Way, West Warwick, RI 02893 USA
Tel: 800.424.9850 | 401.823.5200
Fax: 401.823.8723
info@advanced.com | www.advanced.com
Catalog 16A
Products shown covered by patents issued and/or pending. Specifications subject to change without notice. inch/(mm)
Specifications:
Terminals:
Brass - Copper Alloy
(C36000) ASTM-B-16
Contacts:
Beryllium Copper - Copper Alloy
(C17200) ASTM-B-194
Solder Preform:
Standard: 63Sn/37Pb
Lead-free: 95.5Sn/4.0Ag/0.5Cu
Plating:
G - Gold over Nickel
M - Matte Tin over Nickel
T - Tin/Lead over Nickel
Gold per ASTM-B-488
Matte Tin per ASTM545-97
Tin/Lead per MIL-P-81728
Nickel per QQ-N-290
Features:
Peel away terminal carrier after
soldering.
Disposable carrier.
Complete soldering visibility on
both sides of PCB.
Maximum air flow.
Better flux rinse.
No contact damage due to
terminal carrier insertion.
No contact pull out due to
extraction of terminal carrier.
Solder Preform Terminals
.072 Dia.
(1.83)
.020 Dia.
(.51)
.110
(2.79)
.130
(3.30)
Solder
Preform
.072 Dia.
(1.83)
.165
(4.19)
.125
(3.18)
.020 Dia.
(.51)
Solder
Preform
Tin/Lead: Type -150
Lead-free: Type -811
Tin/Lead: Type -151
Lead-free: Type -812
KS 3 16 - 85 M G
Body Type
Terminal Type
See options on next page
DIP Spacing
3 - .300/(7.62mm)
4 - .400/(10.16mm)
6 - .600/(15.24mm)
9 - .900/(22.86mm)
Number of Pins
(8 to 64)
Additional sizes available - consult factory.
Contact Plating
Terminal Plating
RoHS Compliant:
G - Gold
M - Matte Tin
T - Tin/Lead
RoHS Compliant:
G - Gold
T - Tin/Lead
RoHS Compliant Insulators:
KS - Peel-A-Way
Options
Tape Seal - add 3M to end of part number
Removable tape seal protects plated contact in harsh environments
Sealed socket will not allow dirt and other contaminants to enter
socket chamber and become entrapped behind contact fingers
Spray flux without contaminating contact area
Table of Models
Description: Peel-A-Way®Socket (KS)
Material: Polyimide Film
Index: -269°C to 400°C (-452°F to 752°F)
Polyimide
Film
.005
(.13)
Note: Terminals plated with Matte Tin are available only with Gold plated contacts.
How To Order
Material
Silicone Backed Polyimide Film, -74°C to 260°C (-100°F to 500°F)
Intermittent to 371°C (700°F)
Tin/Lead: Type -111
Lead-free: Type -810
.058 Dia.
(1.47)
.038 Dia.
(.97)
.155
(3.94)
.031
(.79)
Solder
Preform
Peel-A-Way® only
For molded insulators, see pages 28-29.
(shown here on
molded socket)
See pg. 29 for intrusive reflow application.
How To Use:
1. Place socket on PC board.
2. Send PC board and socket through
soldering operation.
3. Peel away polyimide film carrier
for complete solder joint visibility
or leave in place for added
stability.
Polyimide Film
Peel away
after soldering
to PCB.
PCB
Solder fillets visible both sides
for inspection and cleaning.
DIP Sockets
Peel-A-Way®DIP Socket Terminal Carriers
5 Energy Way, West Warwick, RI 02893 USA
Tel: 800.424.9850 | 401.823.5200
Fax: 401.823.8723
info@advanced.com | www.advanced.com
Catalog 16A
Products shown covered by patents issued and/or pending. Specifications subject to change without notice.
inch/(mm)
8.300
(7.62)
.400
(10.16)
.400
(10.16)
10 .300
(7.62)
.400
(10.16)
.500
(12.70)
12 .300
(7.62)
.400
(10.16)
.600
(15.24)
14 .300
(7.62)
.400
(10.16)
.700
(17.78)
16 .300
(7.62)
.400
(10.16)
.800
(20.32)
18 .300
(7.62)
.400
(10.16)
.900
(22.86)
20 .300
(7.62)
.400
(10.16)
1.000
(25.40)
22 .300
(7.62)
.400
(10.16)
1.100
(27.94)
.120
(3.05)
.110
(2.79)
.028 Dia.
(.71)
Standard Terminals
Type -33 Type -51 Type -04 Type -49
Low Profile Solder Tail
.165
(4.19)
.125
(3.18)
.020 Dia.
(.51)
.095
(2.41)
.095
(2.41)
.028 Dia.
(.71)
Super Low Profile Ultra Low Profile
Low Profile Solder Tail
Type -85 Type -176
.038 Dia.
(.97)
.030
(.76)
.125
(3.18)
.034 Dia.
(.86)
.030
(.76)
.125
(3.18)
Type -210
.034 Dia.
(.86)
.015
(.38)
.140
(3.55)
B
CA
.005
(.13)
# of Pins ABC
Near Flush Solder Tail
Near Flush Solder Tail Near Flush Solder Tail
24 .300
(7.62)
.400
(10.16)
1.200
(30.48)
28 .300
(7.62)
.400
(10.16)
1.400
(35.56)
40 .300
(7.62)
.400
(10.16)
2.000
(50.80)
16 .400
(10.16)
.500
(12.70)
.800
(20.32)
20 .400
(10.16)
.500
(12.70)
1.000
(25.40)
22 .400
(10.16)
.500
(12.70)
1.100
(27.94)
24 .400
(10.16)
.500
(12.70)
1.200
(30.48)
28 .400
(10.16)
.500
(12.70)
1.400
(35.56)
32 .400
(10.16)
.500
(12.70)
1.600
(40.64)
10 .600
(15.24)
.700
(17.76)
.500
(12.70)
18 .600
(15.24)
.700
(17.76)
.900
(22.86)
20 .600
(15.24)
.700
(17.76)
1.000
(25.40)
22 .600
(15.24)
.700
(17.76)
1.100
(27.94)
24 .600
(15.24)
.700
(17.76)
1.200
(30.48)
28 .600
(15.24)
.700
(17.76)
1.400
(35.56)
32 .600
(15.24)
.700
(17.76)
1.600
(40.64)
36 .600
(15.24)
.700
(17.76)
1.800
(45.72)
40 .600
(15.24)
.700
(17.76)
2.000
(50.80)
42 .600
(15.24)
.700
(17.76)
2.100
(53.34)
48 .600
(15.24)
.700
(17.76)
2.400
(60.96)
64 .600
(15.24)
.700
(17.76)
3.200
(81.28)
32 .900
(22.86)
1.000
(25.40)
1.600
(40.64)
36 .900
(22.86)
1.000
(25.40)
1.800
(45.72)
40 .900
(22.86)
1.000
(25.40)
2.000
(50.80)
52 .900
(22.86)
1.000
(25.40)
2.600
(66.04)
56 .900
(22.86)
1.000
(25.40)
2.800
(71.12)
64 .900
(22.86)
1.000
(25.40)
3.200
(81.28)
Surface Mount Options Available
# of Pins A B C
Additional standard and custom terminals available.
See Terminals section or consult factory.
Note: Terminals shown with insulator removed.
Available Online:
RoHS Qualification Test Report
CAD Drawings
Dimensional Information
EXPRESS Delivery
Terminals shown with the new EXPRESS
symbol are available in most insulator
body types with fast lead time. Some
quantity and plating restrictions apply.
Search our Distributor inventory online
at www.advanced.com, or check with
customer service for availability.