(R) DIP Sockets Peel-A-Way DIP Socket Terminal Carriers Table of Models Description: Peel-A-Way(R) Socket (KS) Material: Polyimide Film Index: -269C to 400C (-452F to 752F) .005 (.13) Polyimide Film For molded insulators, see pages 28-29. Options Tape Seal - add 3M to end of part number * Removable tape seal protects plated contact in harsh environments * Sealed socket will not allow dirt and other contaminants to enter socket chamber and become entrapped behind contact fingers Features: * Peel away terminal carrier after soldering. * Disposable carrier. (shown here on molded socket) * Complete soldering visibility on both sides of PCB. * Spray flux without contaminating contact area Material Silicone Backed Polyimide Film, -74C to 260C (-100F to 500F) Intermittent to 371C (700F) * Maximum air flow. * Better flux rinse. * No contact damage due to terminal carrier insertion. Solder Preform Terminals Tin/Lead: Type -151 Lead-free: Type -812 .072 Dia. (1.83) .072 Dia. (1.83) * No contact pull out due to extraction of terminal carrier. Specifications: Terminals: Brass - Copper Alloy (C36000) ASTM-B-16 Contacts: Beryllium Copper - Copper Alloy (C17200) ASTM-B-194 Solder Preform: Standard: 63Sn/37Pb Lead-free: 95.5Sn/4.0Ag/0.5Cu Plating: G - Gold over Nickel M - Matte Tin over Nickel T - Tin/Lead over Nickel Gold per ASTM-B-488 Matte Tin per ASTM545-97 Tin/Lead per MIL-P-81728 Nickel per QQ-N-290 See pg. 29 for intrusive reflow application. Tin/Lead: Type -150 Lead-free: Type -811 .165 (4.19) Solder Preform .130 (3.30) Solder Preform Tin/Lead: Type -111 Lead-free: Type -810 Peel-A-Way(R) only .058 Dia. (1.47) Solder Preform .031 (.79) .155 (3.94) .110 (2.79) .125 (3.18) .038 Dia. (.97) .020 Dia. (.51) .020 Dia. (.51) How To Order KS 3 16 - 85 M G Contact Plating Body Type RoHS Compliant Insulators: RoHS Compliant: KS - Peel-A-Way G - Gold T - Tin/Lead DIP Spacing 3 - .300/(7.62mm) 4 - .400/(10.16mm) 6 - .600/(15.24mm) 9 - .900/(22.86mm) Number of Pins (8 to 64) Additional sizes available - consult factory. Terminal Plating RoHS Compliant: G - Gold M - Matte Tin T - Tin/Lead Terminal Type See options on next page Note: Terminals plated with Matte Tin are available only with Gold plated contacts. 5 Energy Way, West Warwick, RI 02893 USA Tel: 800.424.9850 | 401.823.5200 Fax: 401.823.8723 info@advanced.com | www.advanced.com Catalog 16A Products shown covered by patents issued and/or pending. Specifications subject to change without notice. inch/(mm) (R) DIP Sockets Peel-A-Way DIP Socket Terminal Carriers Additional standard and custom terminals available. See Terminals section or consult factory. Standard Terminals Type -51 Type -33 Low Profile Solder Tail Low Profile Solder Tail .165 (4.19) .130 (3.30) .125 (3.18) Type -176 Type -85 Near Flush Solder Tail .030 (.76) .110 (2.79) .125 (3.18) .095 (2.41) .028 Dia. (.71) Type -210 Near Flush Solder Tail .015 (.38) .030 (.76) How To Use: .140 (3.55) .125 (3.18) .038 Dia. (.97) .095 (2.41) .028 Dia. (.71) .020 Dia. (.51) Near Flush Solder Tail Ultra Low Profile .120 (3.05) .110 (2.79) .020 Dia. (.51) Type -49 Type -04 Super Low Profile .034 Dia. (.86) .034 Dia. (.86) Note: Terminals shown with insulator removed. Polyimide Film Peel away after soldering to PCB. Dimensional Information C A B Solder fillets visible both sides for inspection and cleaning. PCB .005 (.13) Surface Mount Options Available # of Pins 10 # of Pins 8 10 12 14 16 18 20 22 24 28 40 16 20 22 24 28 32 inch/(mm) A .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) B .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) C .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78) .800 (20.32) .900 (22.86) 1.000 (25.40) 1.100 (27.94) 1.200 (30.48) 1.400 (35.56) 2.000 (50.80) .800 (20.32) 1.000 (25.40) 1.100 (27.94) 1.200 (30.48) 1.400 (35.56) 1.600 (40.64) 18 20 22 24 28 32 36 40 42 48 64 32 36 40 52 56 64 A .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .900 (22.86) .900 (22.86) .900 (22.86) .900 (22.86) .900 (22.86) .900 (22.86) B .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) .700 (17.76) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) 1.000 (25.40) C .500 (12.70) .900 (22.86) 1.000 (25.40) 1.100 (27.94) 1.200 (30.48) 1.400 (35.56) 1.600 (40.64) 1.800 (45.72) 2.000 (50.80) 2.100 (53.34) 2.400 (60.96) 3.200 (81.28) 1.600 (40.64) 1.800 (45.72) 2.000 (50.80) 2.600 (66.04) 2.800 (71.12) 3.200 (81.28) Products shown covered by patents issued and/or pending. Specifications subject to change without notice. 1. Place socket on PC board. 2. Send PC board and socket through soldering operation. 3. Peel away polyimide film carrier for complete solder joint visibility or leave in place for added stability. Available Online: * RoHS Qualification Test Report * CAD Drawings EXPRESS Delivery Terminals shown with the new EXPRESS symbol are available in most insulator body types with fast lead time. Some quantity and plating restrictions apply. Search our Distributor inventory online at www.advanced.com, or check with customer service for availability. 5 Energy Way, West Warwick, RI 02893 USA Tel: 800.424.9850 | 401.823.5200 Fax: 401.823.8723 info@advanced.com | www.advanced.com Catalog 16A