ARLINK(R) 8000 TECHNICAL FURNITURE AND WORKSTATION SYSTEM Lista Arlink 8000 Workstations (R) Nonin, a manufacturer of physiological monitoring solutions, relies on Arlink 8000 workstations throughout its Plymouth, MN facility. Singleand double-sided mobile workstations with optional footrests enable the quick, effortless reconfiguration that medical device manufacturing demands. FULLY INTEGRATED, DURABLE AND CUSTOMIZABLE MODULAR SYSTEMS FOR PRODUCTIVE WORKSPACE Arlink (R) 8000 Workstations Arlink 8000 Workstation Features 7 Arlink 8000 Workstation Definite Positioning System(R) Arlink 8000 Workstation Trim Colors 8 8 Arlink 8000 Workstation Configuration Options Arlink 8000 Conveyor Workstations 9 9 Arlink 8000 Workstation Easy-Order Combinations Arlink 8000 Workstation Worksurfaces 10 11 Build Your Own Arlink 8000 Workstations 12 Build Your Own Arlink 8000 Mobile Workstations Arlink 8000 Workstation Accessories 13 14 Arlink 8000 Workstation Shelves 14 Arlink 8000 Workstation Lighting 15 Arlink 8000 Workstation Utility Accessories 16 Arlink 8000 Workstation Hanging Cabinets and Drawers Arlink 8000 Workstation Overhead Cabinets 17 17 Arlink 8000 Workstation Panels and Markerboard/Tackboards Arlink 8000 Workstation Parts Bin Rails 18 Arlink 8000 Workstation Tool and Parts Holders Arlink 8000 Workstation ESD Accessories Arlink 8000 Workstation CPU Holder Arlink 8000 Workstation Footrests 18 19 19 19 Arlink 8000 Workstation Keyboard Holder Arlink 8000 Workstation Pivoting Accessories Arlink 8000 Flow Racks 17 19 20 21 Arlink 8000 Progressive Assembly Systems Arlink 8000 Utility and Parts Carts 22 22 VSI (Vertical Space Integrator) Accessory System 23 3 Lista Arlink(R) 8000 Workstations Make Any Workspace Work Workcells for assembling pulse oximeters take advantage of the flexi- No matter what you're working on, Lista's wide range of techni- ble configurability of the Arlink(R) 8000 system. Whether the task is progressive assembly or piece work, mobile Arlink 8000 workstations can be quickly and easily configured to accommodate workflow. cal workspace furniture systems have the variety, durability and flexibility to meet your needs. Arlink 8000 system steel shelves can hold up to 300 lbs. each, and wire shelves have a 150 lb. Technical electronic workstations have the versatility to adapt to a capacity, making them ideally wide range of tasks. At this manufacturing facility for electric power suited for test and repair areas. systems, tech legs are combined with the VSI accessory system and integrated with a conveyor system for maximum productivity on the assembly line. 4 Putting Ergonomics in Their Place Why are ergonomics important? Twisting, lifting, bending, reach- The economics of ergonomics. No matter what kind of job Immediate increases in produc- is performed at an Arlink(R) 8000 ing - these movements can waste tivity mean greater profitability and workstation, your workers ben- time and put unnecessary stress on a quick return on your investment. efit from the most advanced your workers. Repetitive motion Long-term cost efficiency is deliv- application of ergonomic sci- injuries and other work-related ered through reconfigurable compo- ence. They'll be safer, more musculoskeletal conditions increase nents that keep pace with changes comfortable, more organized, both downtime and workers' com- in your work processes. The safer and more productive. pensation costs. The application of work environment provided through ergonomic principles can: ergonomic design helps minimize * Improve productivity by eliminating wasted motion the risk of work-related injuries, so * Minimize the risk of work injuries pensation claims and lost days. Add * Reduce workers' compensation cases it all together, and the value of an you also minimize workers' com- ergonomically designed Arlink 8000 workspace solution is clear. Get in the zone. Work is most efficient when it's kept within areas defined as "primary reach zones" - the horizontal and vertical areas a worker can reach with minimal arm, head or trunk movement (see illustrations below). Work outside the primary * Will workstations be integrated with material flow (racks or conveyors, for example)? * Will employees work alone, backto-back or in teams? * Does the workstation require power tools, computer equipment, supplemental lighting or storage space? Based on your answers, our How do we make workspace workspace designers and engineers work so well? develop comprehensive technical To create your optimal Arlink and design plans that illustrate the 8000 workspace, we ask a lot of workspace solutions and acces- questions: sories that will help your operation * Is there a high product mix, with many product changeovers? become as safe and productive as possible. reach zones adds movement, wastes time and erodes produc- Vertical Reach Zones tivity. By addressing the differences Horizontal Reach Zones 1st. 5" to 7". Reach objects moving only the elbows. 2nd. 15" to 18". Arm extension, using the rotary joint and shoulder movement. 3rd. 24" to 30". Full arm and trunk movement needed. 4th. Full body movement needed to reach tools and equipment. among tasks and workers, we can develop ergonomic workspaces that fit just about any situation. Our solutions keep workflow compact, organized and as close as possible to the primary reach zones, for less stress on your workers and more efficiency and productivity for your business. The primary reach zone is an arc extending down from the level of the operator's heart. 5 Arlink(R) 8000 Workstations Completely integrated and Maximum return on investment modular, Arlink 8000 worksta- Arlink 8000 workstations tions ensure that you'll always Ease of assembly Ergonomics The Arlink 8000 workstation With an emphasis on ergo- feature a unique column design offers the industry's fastest and nomics, the Arlink 8000 work- have the exact workstation that provides a sturdy, flexible simplest set-up and reconfigu- station improves comfort, your work demands. With their backbone for your evolving ration. Virtually no hardware or eliminates wasted motion, and easy reconfigurability, Arlink needs. Thanks to the system's tools are required, making minimizes fatigue and strain. 8000 workstations can be versatility and durability, this changes efficient and frustra- altered for multiple functions exceptional series of worksta- tion-free. and changes in your workflow. tions pays for itself quickly, This enduring adaptability while providing continuous means that you'll have a cost- value for years to come. effective solution for all of your assembly, repair and light manufacturing workstation The Arlink 8000 workstation installation tool kit needs, both today and in the future. PAINT COLORS - PLEASE NOTE! * Arlink 8000 workstations and accessories are available in Light Gray and Sand only. * Other colors, including other standard Lista colors, are available on request at an additional charge. * Accent trim for support columns, lights, steel shelves and footrests (included with each workstation) is available in a choice of colors - see page 8. Ease and flexibility when positioning system components are a hallmark of Arlink 8000 workstations. 6 Arlink(R) 8000 Workstation Features Simplicity Adaptability (R) Secure storage Clean room certification * Fast, easy assembly. Unique Definite Positioning System Hanging drawers and overhead Arlink 8000 workstations have been * With our starter and adder system, workstations can easily link to create infinite layout options. (see page 8) allows easy, secure cabinets can be added anywhere certified for use in a CLASS 10,000 placement and reconfiguration of you need secure storage for valu- clean room per the USA Federal accessories. able tools, equipment, parts or per- Standard 209E and CLASS 7 per ISO Mobility sonal effects. Lista drawer storage 14644 International Clean Room Mobile workstations are easily relo- cabinets also make excellent com- Standard. For information on speci- cated, allowing fast layout changes. panion cabinets - see Lista's fying a clean room workstation, General Storage Catalog. contact your Lista representative. Optional task lighting provides Electrostatic control Aesthetics illumination for the most exacting Electrostatic control Components are powder coated in work. products and accessories are avail- attractive Light Gray or Sand (with Strength able to meet most ESD-related other colors available on request), Made of high-strength, cold rolled requirements. and a choice of ten trim colors for * Workstations can be converted from single- to double-sided at any time - quickly, easily and inexpensively. Modularity * Five standard section widths and five standard column heights. * Section widths can be mixed and matched to suit your needs. steel, the system's columns provide Visibility a contemporary appearance. maximum structural integrity. Double-sided column - worksurfaces and accessories can attach to either side of column Overhead lighting Choice of column heights Easily-repositioned accessories Variety of utility beams Decorative accent trim Outriggers for stability Adjustable worksurfaces in a variety of sizes and materials Variety of footrests Leveling glides or optional mobile base 7 Arlink(R) 8000 Workstation System Arlink 8000 workstations Macro slots provide support for Micro slots give the user the greatest flexibility possible. Our unique heavy-duty components, such as Accent trim colors Plastic accent trim for support worksurfaces and shelving. In the columns, lights, steel shelves and Definite Positioning System , case of adjacent workstation sec- footrests (included with each work- numerous footprint configura- tions, the macro slot is utilized by station) is available in a choice of both to save space and reduce sys- colors. (R) tions, and easy-to-assemble Macro slot starter and adder sections, tem cost. Components that attach mean you can easily adapt and to the macro slots are vertically reconfigure your workstations adjustable in 3" increments. Micro slots provide support for as your needs evolve. Brackets fit into either micro slots or macro slots. Definite Positioning System(R) An innovative assembly concept lighter-duty components, such as COLOR Black COLOR Blue COLOR Bright Blue COLOR Burgundy COLOR Classic Blue COLOR Dark Blue COLOR Light Gray COLOR Royal Blue COLOR Sand COLOR Teal power beams and parts bin rails. Micro slots are located to the left and right of the macro slot, and pro- which features one macro and two vide maximum component place- micro slots on each side of a high ment options. Components that strength column, this approach attach to the micro slots are verti- greatly reduces the time and effort cally adjustable in 1" increments. needed to attach components to the system, while making highly efficient use of space. Since columns are double-sided, a single column may be used by two back-to-back workstations, as well as adjacent sections. 8 Arlink(R) 8000 Workstation Configuration Options Floor space utilization Arlink 8000 workstations enable Many workstation configurations may also be ordered with Conveyor workstations The Arlink 8000 family of con- you to achieve maximum productiv- mobile capabilities, enabling you to veyor workstation systems provides ity per square foot. Our worksta- quickly and easily relocate entire cost-effective, high-efficiency work- tions can be designed in numerous workstation groupings. flow management throughout your configurations to meet any applica- Please contact your Lista repre- entire production stream, between tion. You can configure your work- sentative for additional configura- automatic machines and in opera- stations to suit your needs today, tion options. tions including: and as future needs evolve. * Manual assembly areas * Inspection IN-LINE CONFIGURATION U CONFIGURATION * Testing * Rework * Packaging IN-LINE BACK-TO-BACK CONFIGURATION Select from Arlink 8000 workstation options to best optimize workflow management, including worksurfaces and accessories (task lighting, power, air and data beams, shelving, parts bin racks, etc.). Systems are available with X CONFIGURATION single- or multi-level conveyor or easily integrated with the conveyor of your choice. L CONFIGURATION Single sided - operator faces conveyor with standard worksurface Double sided - operator faces conveyor with standard worksurface Double sided - operator faces conveyor with scalloped worksurface Double sided - operator at 90 to conveyor with standard worksurface T CONFIGURATION 9 Easy-Order Arlink(R) 8000 Workstations The workstation components shown on this page are pre-configured to include our most popular and versatile Arlink 8000 workstation styles. To design a custom workstation to suit your exact needs, see pages 12-13. Arlink 8000 workstations consist of a starter section, and as many adder sections as you need for your application. Select from single- or doublesided starters, adders, or corners in all standard section widths and heights. You may also choose either 28"- or 30"-deep worksurfaces in either plastic laminate or static dissipative laminate. Easy-Order sections include all accessories shown in the charts to the right. To order additional accessories, please see pages 14-20. How to order an Easy-Order Arlink 8000 workstation section Follow the 6 steps below for starter section and repeat for each adder section. 1. Select Easy-Order section configuration. A-SS A-SA A-SC A-DS A-DA A-DC = = = = = = single-sided starter single-sided adder single-sided corner adder double-sided starter double-sided adder double-sided corner adder 2. I Select section length.* 30 = 30" long 36 = 36" long 48 = 48" long 60 = 60" long 72 = 72" long *corner adders 36" long only 3. I Select section height. 54 = 54" high* 72 = 72" high 84 = 84" high *54" high sections do not include light assemblies Single-sided starter Includes: 1 starter assembly (see page 12) 1 footrest 2 outriggers 1 worksurface assembly 1 single-sided power beam (15 amp) 1 open wire shelf, 12" depth 1 light fixture assembly 1 parabolic light diffuser A-SA Single-sided adder Includes: 1 adder assembly (see page 12) 1 footrest 1 outrigger 1 worksurface assembly 1 single-sided power beam (15 amp) 1 open wire shelf, 12" depth 1 light fixture assembly 1 parabolic light diffuser A-SC Single-sided corner adder Includes: 1 adder assembly, 36" 1 outrigger 1 corner worksurface assembly 1 single-sided power beam (15 amp) 1 open wire shelf, 12" depth 1 light fixture assembly 1 parabolic light diffuser 4. I Select section depth. 28 = 28" deep 30 = 30" deep 5. I Select worksurface material. SL = plastic laminate SD = static dissipative plastic laminate 6. I Select powder coat paint color. LG = Light Gray SN = Sand EXAMPLE: to order a starter singlesided workstation section that is 60" long, 84" high and 30" deep with a plastic laminate worksurface and Sand paint, the part number would be A-SS608430SLSN. To order an adder single-sided workstation section that is 48" long, 84" high and 30" deep with a plastic laminate worksurface and Sand paint, the part number would be A-SA488430SLSN. To order an adder single-sided corner section that is 84" high and 30" deep with a plastic laminate worksurface and Sand paint, the part number would be A-SC368430SLSN. (When ordering an "L" shaped configuration, 2 starters must be used with a corner adder.) 10 A-SS A-DS Double-sided starter Includes: 1 starter assembly (see page 12) 2 footrests 4 outriggers 2 worksurface assemblies 1 double-sided power beam (15 amp) 2 open wire shelves, 12" depth 2 light fixture assemblies 2 parabolic light diffusers A-DA Double-sided adder Includes: 1 adder assembly (see page 12) 2 footrests 2 outriggers 2 worksurface assemblies 1 double-sided power beam (15 amp) 2 open wire shelves, 12" depth 2 light fixture assemblies 2 parabolic light diffusers A-DC Double-sided corner adder Includes: 1 adder assembly, 36" 2 outriggers 2 corner worksurface assemblies 1 double-sided power beam (15 amp) 2 open wire shelves, 12" depth 2 light fixture assemblies 2 parabolic light diffusers Arlink(R) 8000 Workstation Worksurfaces Static Dissipative Laminate Worksurface Assemblies Plastic Laminate Worksurface Assemblies Worksurface is constructed of 1" thick medium density particle board covered on top and all sides with non-glare matte finish plastic laminate. The front edge is contoured for comfort and chip resistance. The under side of the worksurface is sealed with a plastic tension sheet to prevent moisture absorption, warping and shedding. Threaded steel inserts facilitate easy assembly and reconfiguration. Assembly includes 2 worksurface support brackets and 2 worksurface support beams. Color: * Dove gray when used with Light Gray workstations * Antique white when used with Sand workstations PART NO. 24" deep 4551 4351 4451 4651 4751 28" deep 8729 8924 8923 8620 8715 30" deep 8730 SA101 SA105 SA109 SA113 32" deep 8731 SA102 SA106 SA110 SA114 34" deep 8732 SA103 SA107 SA111 SA115 36" deep 8733 SA104 SA108 SA112 SA116 LENGTH 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" Worksurface is the same as the plastic laminate worksurface, but with plastic laminate that provides a controlled path to ground for the dissipation of static electricity. The worksurface is provided with a grounding kit that must be used to provide proper protection for components and personnel. Static dissipative value for the material is 10 6 - 10 9. Assembly includes 2 worksurface support brackets and 2 worksurface support beams. Color: * Dove gray when used with Light Gray workstations * Almond when used with Sand workstations PART NO. 24" deep 4551SD 4351SD 4451SD 4651SD 4751SD 28" deep 8754 8994 8992 8622 8716 30" deep 8755 SA155 SA159 SA163 SA167 32" deep 8756 SA156 SA160 SA164 SA168 34" deep 8757 SA157 SA161 SA165 SA169 36" deep 8758 SA158 SA162 SA166 SA170 LENGTH 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" Also available: * * * * Butcher block (1 14" thick) Phenolic resin (1" thick) Stainless steel (1 1 8" thick) Galvanized steel (1 1 8" thick) Corner Worksurface Assemblies Construction is the same as other worksurfaces. Length is 36" or 48". Assembly includes required brackets. PART NO. WORKSURFACE L X D Plastic laminate 4951 36" x 24" 8812 36" x 28" SA200 36" x 30" SA201 36" x 32" SA202 36" x 34" SA203 36" x 36" 8864 48" x 28" 8800 straight back 28" 8806 round back 28" Static dissipative laminate 4951SD 36" x 24" 8814 36" x 28" SA204 36" x 30" SA205 36" x 32" SA206 36" x 34" SA207 36" x 36" 8865 48" x 28" 8802 straight back 28" 8808 round back 28" Worksurface Support Legs Support legs for worksurface, adjustable from 28" to 34" high. 8094 is for use with corner worksurface assemblies. 8265 attaches to front support beam of worksurface to increase load capacity or dampen vibration (shown to right). PART NO. 8094 8265 Material Transfer Worksurfaces Material transfer worksurfaces offer a cost-effective, efficient means of workflow management for products or pallets in assembly, repair and rework environments. Through the use of pop-up balls, popup pads, insert wheels, or insert rollers, worksurfaces are customized to accommodate the transfer needs of your product and process. Material transfer worksurfaces are often a lower cost alternative to conveyors and can greatly improve the efficiency, safety and ergonomics associated with working on and moving a product. The unique ability to integrate Lista's Arlink 8000 components and accessories such as task lighting, wire and steel shelving, drawers and cabinets provides unsurpassed flexibility. Material transfer worksurfaces may be integrated with all Arlink 8000 section sizes, worksurface depths and materials. Please contact your Lista representative for help in configuring a system and providing the solution best suited to your requirements. DESCRIPTION corner worksurface leg worksurface front support leg Split Bay Support Brackets Split bay workstation spans 2 sections with 1 worksurface. Select worksurface assembly equal to the length of the combined sections. Select a split bay bracket to join worksurface assembly to center column. PART NO. 8102 8115 DEPTH 28"-32" 34"-36" 11 Build-Your-Own Arlink(R) 8000 Workstations Designing a custom Arlink 8000 workstation is a simple and straightforward process. 8044 Start by selecting the structural Choose from 5 outrigger designs: assemblies), add outriggers, 8044 choose worksurface(s), and add 8040 needs. In addition to the column heights shown, columns can be custom cut to any size you request. 8041 3. Select outriggers elements (starter and adder the accessories that fulfill your 8040 1. Select starter assembly (length and height) The starter assembly is the first component for each workstation and includes 2 columns with outer and inner trim, and a closed stabilizer panel. Optional open stabilizer panel may be ordered for full access from the rear of the workstation. To specify open stabilizer in place of closed stabilizer, add the prefix "O" to the part number. 30" COLUMN HEIGHT 30" 36" 54" 72" 84" SECTION LENGTH 36" 48" 60" STARTER ASSEMBLY PART NUMBER 8692C30 8897C30 8896C30 8601C30 8692C36 8897C36 8896C36 8601C36 8692 8897 8896 8601 8694 8901 8900 8600 8696 8903 8902 8603 72" 8702C30 8702C36 8702 8700 8704 8041 8043 8042 for worksurfaces 28"-32" deep and shelving 20"-22" deep heavy-duty, for worksurfaces 28"-32" deep and shelving 20"-22" deep for worksurfaces 34"-36" deep for rear of single-sided applications, to increase stability for shelving 12"-18" deep Order 1 outrigger for each column used (2 per column for double-sided applications). For optional swivel footrests, see page 19. For Applications Using Worksurface PART NO. 8044* 8040 8041* 8043 OUTRIGGER DEPTH 22" 23" 30" 4" USE WITH WORKSURFACE DEPTH 28", 30", 32", swivel footrest 28", 30", 32" 34", 36", swivel footrest 28", 30", 32", 34", 36" *slotted to accept optional swivel footrest (see page 19) For Applications Using Shelving Only PART NO. 8040 8042 8043 OUTRIGGER DEPTH 23" 15" 4" USE WITH SHELF DEPTH 20", 22", 24" 12", 14", 16", 18" 12", 14", 16", 18", 20", 22", 24" 4. Select worksurface assembly See page 11. 5. Select accessories See pages 14-20. For optional column caps see page 23. 6. Select paint color 2. Select adder assemblies (length and height) The adder assembly for each adjoining section includes a single column with outer and inner trim, and a closed stabilizer panel. Optional open stabilizer panel may be ordered for full access from the rear of the workstation. To specify open stabilizer in place of closed stabilizer, add the prefix "O" to the part number. 30" COLUMN HEIGHT 30" 36" 54" 72" 84" 12 SECTION LENGTH 36" 48" 60" ADDER ASSEMBLY PART NUMBER 8693C30 8899C30 8898C30 8606C30 8693C36 8899C36 8898C36 8606C36 8693 8899 8898 8606 8695 8906 8905 8605 8697 8908 8904 8608 72" 8703C30 8703C36 8703 8701 8705 Choose from Light Gray (LG) or Sand (SN). 7. Select trim color See page 8. Build-Your-Own Mobile Arlink(R) 8000 Workstations All Arlink 8000 workstation sections can be ordered in a mobile configuration, providing SINGLE-SIDED STARTER DOUBLE-SIDED STARTER SINGLE-SIDED ADDER for easy relocation and smooth DOUBLE-SIDED ADDER movement of workstations. 1. Select mobile starter base 3. Select mobile adder base Base consists of mobile base frame, 2 swivel 4" locking casters and 2 swivel 4" non-locking casters, mobile outriggers and all required hardware. Single-sided base is 34" deep; double-sided base is 54" deep. Adds 7" to overall column height. For optional swivel footrests, see page 19. Base consists of mobile base frame, 1 swivel 4" locking casters and 1 swivel 4" non-locking caster, mobile outrigger(s) and all required hardware. Adder bases must always be mounted on the right-hand side of a single-sided starter base. Adds 7" to overall column height. For optional swivel footrests, see page 19. SECTION LENGTH 30" 36" 48" 60" Single-sided 8313SS 8969SS 8968SS 8668SS Double-sided 8313DS 8967DS 8974DS 8669DS 72" SECTION LENGTH 48" 60" 8768SS 8769DS 30" 36" Single-sided 8313SA 8969SA Double-sided 8313DA 8967DA Stationary Arlink 8000 workstations can easily be retrofitted to mobile configurations when desired. Designing a custom Arlink 72" 8000 mobile workstation is a 8968SA 8668SA 8768SA 8974DA 8669DA 8769DA similar process to designing a stationary workstation. Start by choosing a base (either singlesided or double-sided), select structural elements (starter and adder assemblies), choose worksurface(s)*, and add the accessories that fulfill your needs. In addition to the column 2. Select matching starter assembly 4. Select matching adder assembly The starter assembly includes 2 columns with outer and inner trim and a closed stabilizer panel. Optional open stabilizer panel may be ordered for full access from the rear of the workstation. To specify open stabilizer in place of closed stabilizer, add the prefix "O" to the part number. The adder assembly for each adjoining section includes a single column with outer and inner trim and a closed stabilizer panel. Optional open stabilizer panel may be ordered for full access from the rear of the workstation. To specify open stabilizer in place of closed stabilizer, add the prefix "O" to the part number. 30" COLUMN HEIGHT 30" 36" 54" 72" 84" SECTION LENGTH 36" 48" 60" 72" 30" STARTER ASSEMBLY PART NUMBER 8692C30 8897C30 8896C30 8601C30 8692C36 8897C36 8896C36 8601C36 8692 8897 8896 8601 8694 8901 8900 8600 8696 8903 8902 8603 8702C30 8702C36 8702 8700 8704 COLUMN HEIGHT 30" 36" 54" 72" 84" SECTION LENGTH 36" 48" 60" ADDER ASSEMBLY PART NUMBER 8693C30 8899C30 8898C30 8606C30 8693C36 8899C36 8898C36 8606C36 8693 8899 8898 8606 8695 8906 8905 8605 8697 8908 8904 8608 heights shown, columns can be custom cut to any size you request. *Maximum worksurface depth 30". 72" 8703C30 8703C36 8703 8701 8705 5. Select worksurface assembly See page 11 (maximum depth is 30"). 6. Select accessories See pages 14-20. For optional column caps see page 23. 7. Select paint color Choose from Light Gray (LG) or Sand (SN). 8. Select trim color See page 8. 13 Arlink(R) 8000 Workstation Shelves Open Wire Shelves Steel Shelves Welded steel wire shelf has chrome plated finish. Adjusts from horizontal to 15 and 30 inclination. Includes front lip (can be oriented up or down). Weight capacity 150 lbs. 12" deep. Mounts in macro slots, adjusts vertically in 3" increments. Sturdy steel shelf adjusts from horizontal to 15 and 30 inclination. Weight capacity 300 lbs. Includes color trim (color matches column trim). Mounts in macro slots, adjusts vertically in 3" increments. PART NO. 8884 8927 8925 8625 8725 LENGTH 30" 36" 48" 60" 72" Lab Style Wire Shelves Lab style wire shelves are 9" deep to accommodate normal-sized work boxes and sample trays. They have cross wire welded on underside of shelf, so work boxes slide easily along length of shelf when front lip is facing up. Adjusts from horizontal to 15 and 30 inclination. Weight capacity 150 lbs. Mounts in macro slots, adjusts vertically in 3" increments. PART NO. 4581 4381 4481 4681 4781 LENGTH 30" 36" 48" 60" 72" Wire Shelf Divider PART NO. 12" deep 8285 8321 8320 8482 8592 16" deep 8287 8341 8340 8484 8593 20" deep 8289 8361 8360 8486 8594 Variable Angle Shelves LENGTH 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" Steel Shelf Dividers Mounts on shelf with 2 screws. 8" tall. PART NO. 8319 8339 8349 DEPTH 12" 18" 20" Shelf divider snaps into place. For 12" deep open wire shelf only. PART NO. 8145 HEIGHT 12" Steel Shelf Lips Shelf lip mounts to front of shelf and can be positioned at height of either 5 8 " or 1 1 2". PART NO. 8311 8386 8387 8448 8595 14 FOR SHELF LENGTH 30" 36" 48" 60" 72" Sloping Document Shelves 15 vertical steel shelf is 12" high and has a 2" lip to hold books, manuals, drawings, etc. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8298 8316 8315 8455 8590 LENGTH 30" 36" 48" 60" 72" Worksurface Back Stops Shelf mounts in forward or set back position. Adjusts variably from totally flat to 25 angle and has a full perimeter lip. 150 lb. capacity. Shelf without lip is similar to variable angle shelf but includes pre-punched holes to accept vertical wire dividers (see below). Mounts in micro slots, adjusts vertically in 1" increments. WITH LIP 18" deep 8312 8328 8327 8497 24" deep 8314 8355 8354 WITHOUT LIP LENGTH 4583 4383 4483 4683 30" 36" 48" 60" 4584 4384 4484 30" 36" 48" Steel back stop prevents items from rolling off worksurface. 3" high. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8449 8461 8463 8466 8468 LENGTH 30" 36" 48" 60" 72" Shelf Dividers for Variable Angle Shelves without Lips Divider is 14" diameter galvanized wire that fits into pre-punched holes in the shelf. No hardware required. Depth must match shelf depth. PART NO. 4168 4172 4169 4173 4170 4174 HEIGHT X DEPTH 6" x 18" 6" x 24" 10" x 18" 10" x 24" 18" x 18" 18" x 24" Arlink(R) 8000 Workstation Lighting Accessories Dual Lamp Fluorescent Light Fixture Assemblies Switchable 2/4 Lamp Fluorescent Lights Economical twin tube fluorescent light fixture. Uses energy-saving T8 lamps and electronic ballasts. Comes complete with (2) 32 watt lamps and parabolic diffuser. Color trim attaches to front lip of fixture. Includes 9' power cord. Mounts in macro slots, adjusts vertically in 3" increments. Switchable 2 or 4 tube fluorescent light fixture allows user to select light intensity according to the task. Uses energy saving T8 lamps and electronic ballasts. Comes complete with (4) 32 watt lamps and acrylic diffuser. Fixture tilts up or down 10. Includes 9' power cord. Mounts in macro slots over worksurface, adjusts vertically in 3" increments. * 14" depth is suited for placement under overhead cabinets * 19" depth is standard * 26" depth is suited for use with extra-deep worksurfaces PART NO. LENGTH Fixture with 14" deep bracket 8511S 30" 8533S 36" 8534S 48" 8655S 60" 8784S 72" Fixture with 19" deep bracket 8511L 30" 8533L 36" 8534L 48" 8655L 60" 8784L 72" Fixture with 26" deep bracket 8511XL 30" 8533XL 36" 8534XL 48" 8655XL 60" 8784XL 72" * 14" depth is suited for placement under overhead cabinets * 19" depth is standard * 26" depth is suited for use with extra-deep worksurfaces PART NO. LENGTH Fixture with 14" deep bracket 4375S 36" 4475S 48" 4675S 60" 4775S 72" Fixture with 19" deep bracket 4375L 36" 4475L 48" 4675L 60" 4775L 72" Fixture with 26" deep bracket 4375XL 36" 4475XL 48" 4675XL 60" 4775XL 72" Parabolic Diffusers For 2/4 lamp lights. Optional chrome plated plastic parabolic grid directs light onto worksurface while eliminating glare on adjacent workstations. Replaces acrylic diffuser that is included with light fixture assembly. PART NO. 4376 4476 4676 LENGTH 36" 48" 60" and 72" 15 Arlink(R) 8000 Workstation Utility Accessories Horizontal Power Beams Available in single- or double- sided configuration. Each side has 8 receptacles, lighted power switch and 15 amp or 20 amp breaker (20 amp available in single-sided only). Includes 7 1 2' power cord. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. LENGTH Single-sided 15 amp 8876 30" 8941 36" 8940 48" 8640 60" 8740 72" Double-sided 15 amp 8877 30" 8946 36" 8945 48" 8645 60" 8741 72" Single-sided 20 amp 8875 30" 8959 36" 8991 48" 8657 60" 8743 72" Power Beams with Light Switch Available in single- or double-sided configuration. Provided with separate on/off switch for light, which allows remainder of beam to be left powered. 7 outlets per side. 15 amp standard. Includes 7 1 2' power cord. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. Single-sided 8860 8937 8930 8647 8745 Double-sided 8862 8944 8931 8648 8746 LENGTH 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" Vertical Power Strips Available in 15 amp or 20 amp, and GFCI. Lighted on/off switch, 6' cord with grounded plug and circuit breaker included. Painted black. Mounts vertically to front and back of micro slots, adjusts vertically in 1" increments. Bracket and hardware supplied. PART NO. 8942 8943 8947 8948 DESCRIPTION 15 amp with 6 outlets 20 amp with 6 outlets 15 amp GFCI with 6 outlets 20 amp GFCI with 6 outlets Data Beams Air Beams Modular data beams feature 4 duplexstyle outlets with 8 ports that accept modular snap-in/snap-out jacks or connectors for data, video, or audio connectivity. Beams come with outlets, but jacks/connectors must be purchased separately. On-site wiring for ports is responsibility of customer. Mounts in micro slots, adjusts vertically in 1" increments. Contact Lista for additional specifying assistance. Air beam is supplied with: PART NO. Single-sided 8858 8870 8871 8653 8752 Double-sided 8859 8872 8873 8652 8753 LENGTH 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" Mounts in micro slots, adjusts vertically in 1" increments. PART NO. Single-sided 8879 8949 8950 8951 8750 Double-sided 8853 8977 8978 8660 8751 LENGTH 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" Air Supply Bracket Cable Trays Tray neatly gathers bundles of loose horizontal wires and provides random access for cable routing along its length. Painted black. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8302 8389 8390 8498 8597 LXDXH 30" x 4" x 3" 36" x 4" x 3" 48" x 4" x 3" 60" x 4" x 3" 72" x 4" x 3" Vertical Cable Clip Neatly gathers bundles of loose vertical wires. Painted black. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8391 16 * (1) 14" NPT female inlet on top * (2) 14" NPT female outlets on front (single-sided) and (2) 14" NPT female outlets per side (doublesided) for 30" beams * (3) 14" NPT female outlets on front (single-sided) and (3) 14" NPT female outlets per side (doublesided) for 36", 48", 60" and 72" beams * (2) end mounted jumpers SIZE 3" x 3" Supplied with (1) 14" NPT female outlet. Mounts under worksurface to worksurface support beam. Single outlet. PART NO. 4866 Arlink(R) 8000 Hanging Drawers, Overhead Cabinets and Panels Pelican(R) Drawer Hanging Cabinets 16 3 4" (426mm) wide x 19 1 4"(491mm) deep These cabinets provide convenient below-worksurface storage where only a few drawers are needed. Cabinet is mounted under worksurface to worksurface support beams and can be repositioned to any horizontal position. 50 lb. (22.5kg) weight capacity per drawer. Usable inside dimensions: 13 14" (338.5mm) wide x 16 1516" (430mm) deep. PART NO. 8614 8619 8626 8634 8639 8658 HEIGHT 5" 8" 8" 13 1516" 13 1516" 19 78" 8664 19 78" Secure storage for legal hanging files or personal effects, plus segmented tray for pencils, pens, paper clips etc. Designed to allow easy clearance for worker's knees. Thermo-formed polystyrene body with polyurethane drawer face. Mounts under worksurface to worksurface support beams. Drawer can slide to any horizontal position. Includes concealed ball bearing slides and fully integrated locking system. PART NO. 8845 Overhead Cabinets Steel cabinet with retractable locking door. Includes mounting brackets, lock and 2 keys. Keyed-alike or master lock systems are available. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8297 8956 8955 8650 8760 LXDXH 30" x 15" x 16" 36" x 15" x 16" 48" x 15" x 16" 60" x 15" x 16" 72" x 15" x 16" WXDXH 19 1 2" x 24" x 10" DRAWERS (1) 2 34" (1) 5 34" (2) 2 34" (1) file* (2) 5 34" (1) 5 34" + (1) file* (3) 5 34" Pegboard Panels *file drawer includes file hangers Tote Box Slides into tote box holder which mounts under worksurface, and can slide to any horizontal position. Comes with tote box holder and hangers. PART NO. 8998 WXDXH 11" x 17" x 6" Sturdy painted steel pegboard panel, ideal for hanging tools, etc. 18" high. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8333 8334 8335 8336 8337 LENGTH 30" 36" 48" 60" 72" Modesty Panels Steel or fabric-covered modesty panel acts as a privacy screen between double-sided assemblies (or single-sided where required). Steel panels can be used as fill-in panel or magnet panel to hold instructions or drawings. Fabriccovered modesty panel acts as tackboard and sound dampener. Standard fabric color is gray. Other colors available upon request. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. LENGTH 10" steel panel 8137 30" 8032 36" 8030 48" 8452 60" 8581 72" 20" steel panel 8138 30" 8033 36" 8031 48" 8453 60" 8582 72" 20" fabric-covered panel 8139 30" 8036 36" 8048 48" 8462 60" 8586 72" Reversible Markerboard/Tackboards Louvered Panels Sturdy painted steel louvered panel, holds hanging plastic bin boxes, tool or supply holders. 18" high. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8442 8443 8444 8445 8447 LENGTH 30" 36" 48" 60" 72" Two-sided reversible board. Features white magnetic markerboard on 1 side and gray fabric tackboard on the other. Also functions as privacy panel and sound dampener. 30" high. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8771 8772 8773 LENGTH 30" 36" 48" 17 Arlink(R) 8000 Workstation Storage and Tool Accessories Utility Bins Light-Duty Parts Bin Rails Light duty parts bin rail is ideal for smaller / lighter components and where space efficiency is a priority. Three depths provide for compact tiered placement and allow access to all bins without interference. Chrome finish. Mounts in micro slots, adjusts vertically in 1" increments. (Bins not included - see page 20.) PART NO. 2" deep 8293 8243 8240 8478 8575 4" deep 8294 8244 8241 8479 8576 6" deep 8295 8245 8242 8480 8577 Full length steel bin holds tools, bottles, wipes, reeled solder dispenser, etc. Front edge can be used as a parts bin rail. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8299 8247 8246 8446 8578 LXDXH 30" x 4" x 2" 36" x 4" x 2" 48" x 4" x 2" 60" x 4" x 2" 72" x 4" x 2" LENGTH 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" 30" 36" 48" 60" 72" Lockable Tool Boxes Full length steel tool box securely stores tools and other valuables. Comes with lock and key. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8300 8205 8204 8464 8587 LXDXH 30" x 4" x 2" 36" x 4" x 2" 48" x 4" x 2" 60" x 4" x 2" 72" x 4" x 2" Tool Glide Track and Trolley Assemblies Tool and Accessory Holders Tool and accessory holders add convenience to the workplace. They hang on parts bin rail or utility bin and can be positioned for easy reach. PART NO. 8277 8276 8281 DESCRIPTION tool holder solder spool holder bottle holder 8275 Kim Wipe holder SIZE 3" x 5" 5" x 5" 3" inside diameter 5" x 5" Airgun Holder Mounts to worksurface support beam. 1 1 2" x 1 1 2" with 1" diameter hole. PART NO. 4863 Wire holder Wire guide Wire Holder Assemblies Heavy-Duty Parts Bin Rails Heavy duty parts bin rail holds heavier items such as hardware, fittings, etc. and is easily adjustable for ergonomic access. It can be mounted parallel to the worksurface or at a 15 angle. Mounts in micro slots, adjusts vertically in 1" increments. (Bins not included - see page 20.) PART NO. 8223 8225 8226 8475 8546 LENGTH 30" 36" 48" 60" 72" Assembly includes support brackets (pair) and wire holder - 34" tube with threaded inserts. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8886 8928 8929 8685 8785 Wire Guides Chrome plated bar with several holes, guides wire on the job without tangling or de-railing. Mounts in micro slots, adjusts vertically in 1" increments. PART NO. 8301 8274 8273 8471 8583 18 LENGTH 30" 36" 48" 60" 72" LENGTH 30" 36" 48" 60" 72" Smooth-moving glide keeps electric and pneumatic tools properly positioned. If used in conjunction with fluorescent light assembly, glide track mounts on brackets for fluorescent lights. If used alone, mounting brackets must be ordered separately (see below). PART NO. LENGTH 8958 30" 8975 36" 8976 48" 8633 60" 8728 72" Additional tool trolley 8184 Track Mounting Brackets Used to mount tool track when a light fixture assembly is not used or needed. Come in pairs. PART NO. 8199 8196 8182 DEPTH 14" 19" 26" Arlink(R) 8000 Workstation ESD Products and Miscellaneous Accessories Wrist Strap and Ground Block Mounts under worksurface to worksurface or support beams. Dual receptacles for 2 wrist straps. PART NO. SC12 SC15 CPU Holder Allows CPU to be mounted under worksurface (off of floor). Mounts under worksurface to worksurface support beams. PART NO. 8440 DESCRIPTION ground block wrist strap with 6' coil cord* * with 1 megohm resistor Swivel Footrests WXDXH 9 1 2" x 18" x 20" Drops into slots on 8044 and 8041 slotted outriggers. Adjustable to suit worker at individual workstation. Includes color trim. PART NO. 8885 8911 8910 8610 8710 LENGTH 30" 36" 48" 60" 72" Ground Kits Kit is supplied with all static dissipative worksurfaces or shelves. Includes attaching hardware. PART NO. 8909 8909SD PART NO. SC10 SC30 DESCRIPTION worksurface kit with 8' cord* shelf kit with 6' cord** LXW 21" x 10" Freestanding Footrests Ergonomic footrest provides support for user's feet. Height adjustable from 3" - 12". Footrest platform is 15" deep x 21 34" wide, and adjusts from totally flat to a 25 angle. Includes ribbed mat. PART NO. SC14 Tiltable keyboard holder allows computer keyboard to be stored under worksurface when not in use. Includes swivel pull-out mouse pad which can be attached to either right or left side. PART NO. 8451 Common Point Ground Block Two connection sides - one side connects to a 1 megohm resistor, the other side bypasses the resistor and connects directly to ground. Includes 8' cord. Keyboard Holder with Mouse Tray DESCRIPTION not static dissipative includes ground snap for static dissipative environments * with 1 megohm resistor ** without 1 megohm resistor 19 Arlink(R) 8000 Workstation Pivoting Accessories Micro Slot Universal Mounting Bracket Bracket is welded steel. Mounts in micro slots, adjusts vertically in 1" increments. For attaching articulating arm to column. Must be ordered separately. PART NO. 8406 FOR ARTICULATING ARMS 8410, 8409 Heavy-Duty Universal Mounting Bracket Equipment Shelves Monitor Shelves with Keyboard Holder Holds computer monitor. Includes retractable wire keyboard holder. 75 lb. capacity. Requires universal mounting bracket (not included). PART NO. 8878 8838 FOR ARTICULATING ARMS 8410, 8409 For easy access to small tools, instruments, parts, etc. 21 14" wide x 7 38" deep. 75 lb. capacity. Requires universal mounting bracket (not included). Ribbed mat optional. Optional Mouse Tray PART NO. 8895 Flat Panel Monitor Arms For attaching flat panel monitor to upright. 17 1 2 lb. capacity. Mounts in macro slots, adjusts vertically in 3" increments. Includes mounting bracket. Two 8" tubular steel arms, linked together to provide an additional articulation point. 50 lb. capacity. Can mount left or right, adjusts vertically in 3" increments. Included with accessories as shown. Does not include mounting bracket. PART NO. 8409 20 FOR MOUNTING BRACKETS 8406, 8423 PART NO. 8887 8765 8759 DESCRIPTION accessory shelf with double articulating arm ribbed rubber mat Bin Container FOR MOUNTING BRACKETS 8406, 8423 Double Articulating Arm For displaying papers, plans, etc. Includes lip for pencils, pens, etc. Requires universal mounting bracket (not included). PART NO. 8666 8776 DESCRIPTION 11 78" wide x 13 34" high with double articulating arm * 8415 swings left and right, and has 2 articulating points. * 8628 also includes a 9" extender which allows positioning of monitor screen away from adjacent accessories. PART NO. 8415 8628 Large Document Holders For displaying large documents, and open binders and books. Includes lip for pencils, pens, etc. Requires universal mounting bracket (not included). PART NO. 8670 8786 DESCRIPTION 23 58" wide x 13 34" high with double articulating arm DESCRIPTION 9 1 2" wide x 7 58" deep Tubular steel arm is 18" overall length. Weight capacity is 75 lbs. Can mount left or right, adjusts vertically in 3" increments. Included with accessories. Does not include mounting bracket. PART NO. 8410 DESCRIPTION 12 38" wide x 12 38" deep with double articulating arm Document Holders Accessory Shelves Mouse tray attaches to monitor shelf with keyboard holder (above) to hold computer mouse and/or mouse pad. Ordered separately. Articulating Arm PART NO. 8857 8839 DESCRIPTION 12 38" wide x 12 38" deep with double articulating arm Bracket is welded steel. Bolts on through column and adjusts vertically in 3" increments. For attaching articulating arm to column. Must be ordered separately. PART NO. 8423 Holds a variety of customer-supplied equipment or tools. 75 lb. capacity. Requires universal mounting bracket (not included). DESCRIPTION attaches to column includes 9" bracket extender Holds 3 rows of plastic bins for easy access to parts and components (bins not included - see chart to right). Interior space per shelf is 20" wide x 6" deep. Top shelf is 3 14" high, second and third shelves are 3 34" high. 50 lb. capacity. Requires accessory shelf (above) for support (not included), or can be used freestanding. Requires universal mounting bracket (not included). PART NO. 8888 Task Light Bracket Sturdy welded steel bracket mounts in micro slot with 1 2" diameter hole for task light. PART NO. 8130 8132 LENGTH 9" 15" Parts Bin Rack Holds industry-standard plastic parts bins (not included - see below). Requires universal mounting bracket and 8410 or 8409 swing arm (not included). PART NO. 8432 DESCRIPTION 18" wide x 10" high Parts Bin Boxes Blue plastic bin fits in rack or on rail and slides to position. Conductive bin is black. PART NO. Non-conductive 8253 8254 8255 Conductive 8252 8250 8251 DIMENSIONS 4 1 2" W x 4" D x 3" H 5 1 2" W x 4" D x 3" H 7 1 2" W x 4" D x 3" H 4 1 2" W x 4" D x 3" H 5 1 2" W x 4" D x 3" H 7 1 2" W x 4" D x 3" H Arlink(R) 8000 Flow Racks Arlink 8000 Flow Rack Shelf Accessories Shelves are slotted on 1 1 2" increments to accept roller tracks and guides. Guides separate sections. Rollers are 1116" wide; tracks are 1" wide. Two rollers are recommended for rows up to 15" wide, and 3 or more for wider rows. Arlink 8000 Flow Rack Shelf Assemblies Shelf assembly includes roller tracks and guides as shown. 3" high, 48" deep. 600 lb. weight capacity. For additional roller tracks and guides, see chart to right. Arlink 8000 Flow Racks Arlink 8000 flow racks sections are available in 4 standard widths from 30" to 60". Flow racks are height adjustable in 1" increments. The flow rack angle is adjustable. 1400 lb. weight capacity. Arlink 8000 Flow Rack Starter Assemblies Consists of 2 starter assemblies, 2 outriggers, 1 flow rack shelf assembly and 4 connectors. PART NO. 72" high FRS3072 FRS3672 FRS4872 FRS6072 84" high FRS3084 FRS3684 FRS4884 FRS6084 PART NO. FR30 FR36 FR48 FR60 WIDTH 30" 36" 48" 60" INCLUDES 4 roller tracks, 1 guide 4 roller tracks, 1 guide 6 roller tracks, 2 guides 6 roller tracks, 2 guides PART NO. FRTR FRGU FRCP DESCRIPTION roller track roller guide replacement clip Flow racks can be used to stage and deliver parts utilizing gravity, reducing material handling time and costs. Bins or totes are loaded on flow rack frames from the rear, and as operators remove one from the front, a new bin glides forward on rollers. Similarly, flow rack frames can be inclined away from an operator to allow removal of completed work. Flow racks are constructed utilizing the same Starter and Adder system common to all Arlink 8000 workstations. Worksurface assemblies and accessories as shown in this catalog can be added to create a complete parts presentation and integrated workstation system. Ball transfer SIZE tables, other material handling 30" wide x 48" deep 36" wide x 48" deep 48" wide x 48" deep 60" wide x 48" deep worksurfaces (see page 11) or 30" wide x 48" deep 36" wide x 48" deep 48" wide x 48" deep 60" wide x 48" deep conveyors (see page 9) may also be integrated into the worksurface as needed. Flow racks can be made mobile by the addition of caster sets. Arlink 8000 Flow Rack Adder Assemblies Flow rack sections may be Consists of 1 adder assembly, 1 outrigger, 1 flow rack shelf assembly and 2 connectors. joined side by side, using Starter PART NO. 72" high FRA3072 FRA3672 FRA4872 FRA6072 84" high FRA3084 FRA3684 FRA4884 FRA6084 any overall length and combina- SIZE 30" wide x 48" deep 36" wide x 48" deep 48" wide x 48" deep 60" wide x 48" deep and Adder assemblies to achieve tion of section sizes. 30" wide x 48" deep 36" wide x 48" deep 48" wide x 48" deep 60" wide x 48" deep 21 Arlink(R) 8000 Progressive Assembly Systems, Utility and Parts Carts Progressive Assembly System Utility and Parts Carts Designed for transportation Single- or double-sided of circuit boards or other panel- modular carts can be configured ized items, not to exceed 15" wide and 38" thick. Two versions are available. with any combination of shelves, Shelf Mount Progressive Assembly Systems Consists of 2 aluminum slide rails, 2 channel rails, 2 joiner pins and 1 chrome plated part trough. Shelves must be ordered separately (see page 14). PART NO. 36" wide shelf 8936-20 8936-22 48" wide shelf 8935-20 8935-22 60" wide shelf 8637-20 SHELF DEPTH 20" 22" 20" 22" 20" Bench Tops for Progressive Assembly System Consists of 2 steel end supports (left and right), 2 channel rails, 1 stiffener panel, 2 aluminum slide rails and 2 joiner pins. Base footprint size 36" wide x 20" deep. PART NO. 8979 8980 8690 LENGTH 36" 48" 60" Progressive Assembly System Accessories Further customize your system. Additional Side Rails PART NO. 8379 8380 8476 SECTION LENGTH 36" 48" 60" Parts Bin Rail Supports (pair) For bench top progressive assembly system. PART NO. 8505 22 SECTION LENGTH 24" parts bins, utility bins, etc. to meet your exact needs. All are constructed using Lista's standard Arlink 8000 column to allow complete interchangeability of components with workstations. For accessories for utility and parts carts, see pages 14-20. Utility and Parts Carts 54" high carts feature 2 wheel-locking and 2 non-locking casters, 3 1 2" diameter. Wheels are rubber, non-marking. Accepts: * Shelves (page 14) - maximum shelf depth for parts cart is 14" * Pegboard, louvered, reversible and modesty panels (page 17) * Bin rails (page 18) * Power, air and data beams (page 16) * Pivoting accessories (page 20) PART NO. Single-sided 8326SS 8915SS 8964SS Double-sided 8326DS 8915DS 8964DS SECTION LENGTH 30" 36" 48" 30" 36" 48" VSI (Vertical Space Integrator) Accessory System Surface Mount PART NO. Starter assembly 8352 8826 8855 8672 8793 Adder assembly 8353 8828 8856 8673 The VSI (Vertical Space SECTION WIDTH* 30" 36" 48" 60" 72" 30" 36" 48" 60" * must be a minimum of 6" shorter than worksurface width VSI uprights and accessories mount onto any workbench worksurface to provide a complete accessory system. VSI uprights' double-sided columns allow uprights and accessories to be shared between two benches (see below). VSI (Vertical Space Integrator) Accessory System Features sturdy 45" high, 1 14" wide, 4" deep, roll-formed steel columns that fasten to the bench top and are stabilized by a modesty panel. Starter assembly includes 2 columns, 4 trim strips, 1 modesty panel, and mounting hardware. Adder assembly includes 1 mounting column, 2 trim strips, 1 modesty panel and mounting hardware. Trim strip color can be chosen from the chart on page 8. Foot plate for surface mount uprights is 5" x 3". Surface mount VSI System width must be a minimum of 6" shorter than worksurface width. Rear mount VSI System can be full width of Align workstation worksurface. For VSI system accessories, see pages 14-20. Rear Mount For Align(R) adjustable-height workstations only (see Lista's General Workbench and Workspace Furniture Catalog). PART NO. Starter assembly ADJ-VSI-830S ADJ-VSI-836S ADJ-VSI-848S ADJ-VSI-860S ADJ-VSI-872S Adder assembly ADJ-VSI-830A ADJ-VSI-836A ADJ-VSI-848A SECTION WIDTH* 30" 36" 48" 60" 72" 30" 36" 48" * section width must be equal to or less than Align worksurface width Integrator) System is designed to expand the efficiency of: * Align(R) adjustable height workstations * Lista technical electronic workstations * Lista industrial workbenches * Retrofit to existing workbenches You can create highly productive and efficient work centers by adding above-worksurface work aids such as task lighting, storage shelves, power beams, parts bin rails, etc. With the VSI System, you're able to utilize the Arlink 8000 system's wide range of shelving and accessory options that easily attach to the vertical column without the need for tools, using the micro and macro slots on Column Cap both sides of the upright columns Optional gray plastic cap to finish off top of column. Order 1 per column used. (see page 8 for detailed descrip- PART NO. 8004 WXD 1 1 2" x 4" tions). The VSI System is easily installed by in-house personnel and can be utilized as a single unit on a stand-alone bench, or linked together using our starter/adder system. VSI columns are double-sided, and one VSI may service two benches when benches are positioned back-to-back. 23 Lista Arlink(R) 8000 Colors CODE COLOR LG Light Gray CODE COLOR SN Sand Color differences exist between color samples and actual finishes. Please contact your Lista representative for accurate color matching. Custom colors are available and will be quoted on request. Lista International headquarters and manufacturing facility in Holliston, MA, USA. Lista International also has a facility in Burlington, ON, Canada. Lista International Corporation 106 Lowland Street Holliston, MA 01746-2094 USA Telephone: (508) 429-1350 Toll-Free: (800) 722-3020 Fax: (508) 626-0353 Internet: www.listaintl.com E-mail: sales@listaintl.com ISO 9001 Certified Product specifications are subject to change without notice and are those in effect at time of shipment. (c)2008 Lista International Corporation 08-08 10M Printed in U.S.A. Lista(R), Making Workspace Work(R), Align(R), Arlink(R), Definite Positioning System(R), PrevenTip(R) and Storage Wall (R) are registered trademarks of Lista International Corporation.